FS: E36 M3 / 996 front BBK - 996 caliper rebuilt with front adapters.
Set of front axle 996 adapters (Creations motorsport) for E36 M3 - includes front 996 calipers, rebuilt with high temp stop tech seals/dust boots. Leave as-is and run 345mm CSL E46 M3 rotors or have machined down and run 325mm E46M3 standard front rotors.
Contact me off of panjo / direct to complete sale. Bimmerforums: SamGrant951
List Date: 1/31/2017
For more info, click here to view the original listing: FS: E36 M3 / 996 front BBK - 996 caliper rebuilt with front adapters.
--------------------------------------
This item is no longer available.
--------------------------------------
Last edited by SamGrant951; 02-11-2017 at 03:24 PM.
Offer sent
I also have 997 OEM street pads (same pad design as 996) that I could include with these or a set of PFC08 BNIB pads (retail 320), Id sell for $220 since I won't be needing them.
Bump for a good guy
98 Fern Green M3/2 - Precision 6870/AR Designs Twin Scroll/RK/E85
2017 Toyota Tundra Crewmaxx - Family Whip
2011 Pierce 75' Quint - Fire Apparatus West Islip FD
Thanks - only reason Im selling is a new car coming that already has Stoptechs on it.
Decided it might be easier to sell the whole thing and just get myself another set of rears so $950 shipped on all (4) Porsche 996 calipers front and rear - rebuilt/new seals, F+R sets of adapters and Ill throw in new Porsche OEM street pads F+R.
I also have a set of PFC08 / PFC06 pads ( that Id sell as well, $450 shipped for the set (new $580).
F: 0776.08.17.44
R: 0738.06.16.44
Last edited by SamGrant951; 02-04-2017 at 10:20 AM.
$900 shipped
I know this is silly but let me know if you want to sell all 4 brackets, I'll do 260$ shipped.
I might do something like that if someone wants just the calipers.
PFC race pads sold.
Would love to know if you could run this set up with Performance Friction 2 piece rotors (328mm).
1994 M3 Eurospec (Canadian Edition) #25 (http://www.bmwmregistry.com/detail.php?id=12244)
I don't think so - I think the pad would hang below the pad surface on the PFC rotors (I tried). I did end up using a set of rear PFC 2 piece rotors on my M Coupe with this setup w/o issue however....on the fronts I used OEM blank rotors.
Last edited by SamGrant951; 02-09-2017 at 11:40 AM.
Hmm - I guess I could always sell the PFCs (they actually cost more than these calipers and brackets combined and I've only got about 1000 kms on them). Considering it.
1994 M3 Eurospec (Canadian Edition) #25 (http://www.bmwmregistry.com/detail.php?id=12244)
Do it!
I'm tempted, though the currency exchange rate is killer right now.
1994 M3 Eurospec (Canadian Edition) #25 (http://www.bmwmregistry.com/detail.php?id=12244)
SOLD thanks
Last edited by SamGrant951; 02-11-2017 at 03:24 PM.
Bookmarks