For sale:
1. S50 cylinder head with approximately 112k miles. Camshafts were sold separately. Sale includes BNIB updated valve retainers and seals. I would recommend having a machine shop install everything. I will also include an Elring brand headgasket to whoever buys the cylinder head. $200
2. S50 engine block, almost complete. The only parts missing are the alternator, thermostat cover and belt tensioners. Piston #6 (closest to the firewall) shows signs of either a dropped valve or somehow contacting the valves, I found this out after pulling the engine and separating everything. The grooves on top of the piston are aesthetic and I drove the car for 5 years in this condition and did not notice it until I tore the motor apart to do the headgasket. However, instead of putting it back together I swapped in an s52 deal that I couldn't pass up. $400
Local pickup on Long Island only, PM me for contact information and more details.
Last edited by ChuckDizzle; 03-10-2017 at 04:13 PM.
Is this head still available?
Sent from my SM-N900P using Tapatalk
85 535i Imola Red 93 M3 Sedan Track Car (Clone, obviously)
81 320 5spd 89 325i Baby Brother project
Bookmarks