Question for the Forum. I update an E83s software and after the update the EGS is not communicating with the DME. My theory is either the newer DME software cannot communicate with the original EGS software or the EGS software was corrupted during the update.
Any ideas for options? The car now has a brake and abs light on the dash and I think it is in failsafe mode (3rd gear).
Thanks in advance.
Take it to the shop
Whats up jclausen! I figured I would get more out of the forum for an answer.
I am headed over to bmw coders to see if I can gain some insight on how to tackle this issue. Maybe WinKFP or Progman can fix it.
Last edited by charter21p5; 01-22-2017 at 08:23 PM.
_________
1980 320i - Kashmir Metallic - Sold in 1993
1985 535i - Cosmosblau Metallic - Sold in 1995
1985 535i - 1985-06 - Delphin Metallic - Sold in 2016
1983 320i - 1982-09 - Kashmir Metallic - Currently own!
2004 ZHP - 2003-08 - Titanium Metallic - Currently own!
2000 M5 - 2000-02 Titanium Silver - Currently own!
I fixed the issue with software. No need to take it to the shop.
_________
1980 320i - Kashmir Metallic - Sold in 1993
1985 535i - Cosmosblau Metallic - Sold in 1995
1985 535i - 1985-06 - Delphin Metallic - Sold in 2016
1983 320i - 1982-09 - Kashmir Metallic - Currently own!
2004 ZHP - 2003-08 - Titanium Metallic - Currently own!
2000 M5 - 2000-02 Titanium Silver - Currently own!
Bookmarks