I installed the INPA software per instructions. I can get into the software and the battery and ignition lights are black as they are supposed to be. When I go to E83, Body and select Airbag I get this error. The cable is the K+DCAN and the light comes on all the way up to the point where I select Airbag, then goes out with the error above. The ignition is like it's supposed to be. Using Windows 10 64 bit. The COM port is set to 5 and verified in the .ini file. I also have the ISTA software but haven't installed that. Not sure if it's required or not. All I'm trying to do is turn of the passenger occupancy airbag light on the dash after installing a bypass circuit.
I see a lot of people have this problem but can't seem to find a thread with a fix. Any help would be appreciated.
What production month/year is the car?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
2007 E83 X3 3.0si
- - - Updated - - -
Got the exact error on E46 2001 325i.
It's very important to post the production month and year of your car. Its on the driver's door jamb.
- - - Updated - - -
You need to bridge pins 7&8 of your OBD cable, and try then.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Says AG08/06, so I'm guessing Aug 2006. The cable is supposed to work as is, but I can try that.
You definitely need to bridge pins 7&8 for your 2 car models.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
No go with pins 7 & 8 being jumped. Different error now. ZAE, BAE, ZAE2.... etc, etc. Waiting on another supposed plug and play cable with software.
2001 325i
2005 330ci vert
2007 X3
I received a new cable and software disc today. Installed the INPA software with cable drivers and received the exact error IFH-0009. I then tried the old cable that I jumped the 7 & 8 pins as suggested and still had a problem. I checked the ODB.ini file and found it was set to com5, so I changed it to com1. I also had to copy it to the Windows directory because it wasn't working from C:\IDAIBAS\BIN. I also put a copy in System32 just to be sure. Everything works after doing that. I do get a pop-up saying language mismatch or something like that, but I can get in a do what I need, though the error is in German.
Last edited by Drexellake; 01-14-2017 at 12:20 PM.
2001 325i
2005 330ci vert
2007 X3
reviving old thread. IFH0009 is now a problem. Car 525TDS Year 1997 month 11. Can someone advise please.
Bookmarks