2017 what did you do to your e38 today?

[Jamos]

You need to get that rocker fixed before it fills up with too much crap!

[ColtonBH]

You need to get that rocker fixed before it fills up with too much crap!

Will do, it's on a very long to-do list

Sent from my Nexus 6P using Tapatalk

[luauboy]

Well it wasn’t today - but Friday I installed poly bushings on my front suspension. For those who’ve said in the past that a lowered e38 rides like a truck after swapping the rubber for the poly I can only respond with - i’m 10-20 good buddy - i’m Gone ...

[ColtonBH]

This car is starting to actually look good

Sent from my Nexus 6P using Tapatalk

[clarkitect]

This car is starting to actually look good

Sent from my Nexus 6P using Tapatalk

Looks great! What did you end up doing for wheels? Hard to tell from the angle. Mpars?

[ColtonBH]

Looks great! What did you end up doing for wheels? Hard to tell from the angle. Mpars?

Thanks! Still not a great angle, but they're Breyton Flames off of my old e39, they need to be refinished but don't look terrible from a distance, much better than stockers

Sent from my Nexus 6P using Tapatalk

[NordmanMg]

It looked way better with original turn lights

[ColtonBH]

It looked way better with original turn lights

Well, considering the lens fell off one side of the stock set shortly after I got home that's not an option. I don't like the orange, I would've preferred a lighter tinted clear set, but a member had this set for sale very reasonable so I went with these. I still like these better than orange

Sent from my Nexus 6P using Tapatalk

[carnut1947]

My windshield washers have never worked since purchase so I decided today to find out why. I could hear the pump working so I pulled the cowl vent off and disconnected the hoses to the spray nozzles. No water from the hoses? I had gotten a pump from a wreck weeks earlier so I swapped it out. Now I had water to the nozzles but the plastic hose to the right one was cracked.I ended up cutting off about 5 inches of plastic hose and slipped on vacuum hose. Now they work! Tomorrow I will insert a sewing needle into the nozzles to align them better to the windshield. The nozzles pivot like an eye socket so I can align them evenly left to right.

[Sundaycruzer]

Well it wasn’t today - but Friday I installed poly bushings on my front suspension. For those who’ve said in the past that a lowered e38 rides like a truck after swapping the rubber for the poly I can only respond with - i’m 10-20 good buddy - i’m Gone ...

Where did you get the bushing from?


Sent from my iPad using Tapatalk

[Sundaycruzer]

My windshield washers have never worked since purchase so I decided today to find out why. I could hear the pump working so I pulled the cowl vent off and disconnected the hoses to the spray nozzles. No water from the hoses? I had gotten a pump from a wreck weeks earlier so I swapped it out. Now I had water to the nozzles but the plastic hose to the right one was cracked.I ended up cutting off about 5 inches of plastic hose and slipped on vacuum hose. Now they work! Tomorrow I will insert a sewing needle into the nozzles to align them better to the windshield. The nozzles pivot like an eye socket so I can align them evenly left to right.

Black 1/4 in. Plastic hose that’s available at any hardware store works perfect to replace the plastic lines did my entire hood with it couple of years ago and no issues looks stock also


Sent from my iPhone using Tapatalk

[nike32]

Seven went to sleep yesterday. Just on time!
Ahead is 24hours of non-stop snowing.
But now I can park E39 again on two spots

Отправлено с моего SM-G935F через Tapatalk

[jaysonx]

Got all my 750il parts in for a brake swap in a few weeks.

[purplecty]

Got all my 750il parts in for a brake swap in a few weeks.

Do you need the caliper brackets too? What brand of rotors?

Sent from my SM-N910T3 using Tapatalk

[jaysonx]

Do you need the caliper brackets too? What brand of rotors?

Sent from my SM-N910T3 using Tapatalk

They came with both front and rear brackets. I went with the duralast rotors since I got 20% off and free shipping. Painted the hubs myself with high temp paint.

[purplecty]

They came with both front and rear brackets. I went with the duralast rotors since I got 20% off and free shipping. Painted the hubs myself with high temp paint.

I was about to say the corrosion protection looked great. Where did you get the calipers?

Sent from my SM-N910T3 using Tapatalk

[jaysonx]

I was about to say the corrosion protection looked great. Where did you get the calipers?
Sent from my SM-N910T3 using Tapatalk

Thanks! Autozone for the fronts, rock auto for the rears. Purchased online.

I shopped a lot of places, inventory seems to be really low on them.

[purplecty]

Thanks! Autozone for the fronts, rock auto for the rears. Purchased online.

I shopped a lot of places, inventory seems to be really low on them.

How much did you pay for the pkg?

Sent from my SM-N910T3 using Tapatalk

[Chief Jimbo]

I don’t see the brackets in your picture that purple is talking about. Are you sure you got them? He is talking about the brackets that the calipers mount to that usually stay with the car.

[ColtonBH]

Put my T-stat on, now I don't have to drive in high gears to keep the car from underheating

Sent from my Nexus 6P using Tapatalk

[jaysonx]

I don’t see the brackets in your picture that purple is talking about. Are you sure you got them? He is talking about the brackets that the calipers mount to that usually stay with the car.

They are fully assembled in the pic. Here is the caliper and bracket.

[Chris V]

Finally got the new rear inner wheel well liners in. Those things are stiff in the cold and hard to get shoved all the way up in there at the lip of the flare. But a huge difference... the old ones had gotten quite brittle and just pulled out in tiny pieces.

[ibumpers]

Finally got the new rear inner wheel well liners in. Those things are stiff in the cold and hard to get shoved all the way up in there at the lip of the flare. But a huge difference... the old ones had gotten quite brittle and just pulled out in tiny pieces.

Think that's my next move, all 4

[Sundaycruzer]

6.5 hour drive to Las Vegas for me today, last trip with the 4.4 last time I do this with a speed limiter.


Sent from my iPhone using Tapatalk

[franco90]

Bought a MK4 on eBay for $130 dollars score


Sent from my iPhone using Tapatalk