Results 1 to 12 of 12

Thread: FS : TC Kline Truematch SA Coilover kit

  1. #1
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3

    FS : TC Kline Truematch SA Coilover kit

    Price drop : $1200


    Full coilovers suspension for e36 M3with many extras. Also, Vorshlag camber plates available with purchase or separately.

    They have about 13,000 miles on them over ~1.5 years. TCKline True Match Single Adjustable Coilovers with 500# front and rear springs.
    I decided on 500# springs based on JoeNationWide's recommendation here for the definitive suspension.

    These are built around custom valved Koni parts, I believe. They were amazing shocks/springs, offering precise drop, excellent ride comfort, and unleashing the potential of the platform for hugging corners. For daily driving, set to 2-clicks from full soft they were perfect for me and my girlfriend.

    Here is the original kit, and pictures of what I am selling for $1200 + shipping. My kit has rubber mount RSMs, no damage, just a little road grime. Packed carefully, instructions for install available online, fully warrantied against defects. Note that I had a 95 M3, but I am including 96+ front strut hats (already notched) for increased camber.

    IMG_8489

    IMG_8490

    IMG_8491

    IMG_8492

    IMG_8493

    IMG_8494

    IMG_8495

    IMG_8496

    IMG_8497

    IMG_8498

    IMG_8500

    I also have a set of Vorshlag camber plates I can sell for $350 (also with 13K miles on them). (These sold so are no longer available)

    IMG_8501

    IMG_8502

    IMG_8503

    I have previous transactions on the forum if you want references.

    - - - Updated - - -

    I forgot to include photos of the accessories, I have a few "goodies" included, usually beyond what a second-hand sale would include.
    Hopefully these will be useful to the buyer.

    Accessories

    These include 3 (three) tools to adjust ride softness/firmness. These can either be permanently installed on the rear shocks or used as necessary. Also some rubber caps for the top of the rear shocks.

    RSM reinforcement brackets, to prevent the sheet metal from cracking.

    A set of replacement RSM rubber bushings from Rogue Engineering. The ones in the RSM are perfectly fine, but if you exceed the useful life, these are a $20 part.

    Rogue Engineering Rear Trailing Arm Shims, to tighten up the rear end slop.

    33-41-1-133-785 Nut for Wheel Bearing/Axle (27 X 1.5 mm) (QTY 4) Febi Bilstein from Pelicanparts - $5 ea
    33 32 6 772 698 Eccentric Bolt for Rear Control Arm, 12 X 1.5 X 81mm BMW brand - $7
    33 32 6 770 824 Inner Bushing on Rear Lower Control Arm (QTY 2) Lemforder brand - $10 ea

    Heavy Duty rear subframe mounting metal plates. These are used if upgrading your rear subframe to Polyurethane (like with PowerFlex) mounts. Some kits, or if you buy direct from PowerFlex, don't include the washers. Some kits (like BavAuto's) do include washers, but these washers I'm including are EXTRA heavy duty! You'll spend $25 at McMaster Carr for an 8-pack (twice as many as you'll need), so these are my extras. If you're interested in more info, read here.

    Washers
    Stock washers in some PowerFlex kits on the left, McmasterCarr washers on the right.

    Rough estimate of box weight with me holding it on my bathroom scale is 55 lbs. You can figure out your shipping cost by choosing your preferred shipping method and using 11706 (Bay Shore NY) as the origin zip code.
    Last edited by FastFreddie; 03-07-2017 at 06:42 AM. Reason: Price drop
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

  2. #2
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    bump
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

  3. #3
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    Bump

    Sent from my Z958 using Tapatalk
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

  4. #4
    Join Date
    Jan 2010
    Location
    sacramento ca
    Posts
    95
    My Cars
    BMW E36 M3
    Not goin to low ball.. but it you want to sell the coils with the camber plates for a deal let me know sir

  5. #5
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    Camber plates are SOLD. No longer available with the suspension.

    All PMs replied to.
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

  6. #6
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    Bump. Still available
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

  7. #7
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    Price drop bump
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

  8. #8
    Join Date
    May 2015
    Location
    U S A
    Posts
    1,079
    My Cars
    yay
    I am looking for softer springs around this rate. I currently have 600/800. In case this is helpful for anyone.

  9. #9
    Join Date
    Oct 2013
    Location
    Eunice Louisiana
    Posts
    4
    My Cars
    1999 M3 Coupe
    Are the rears adjustable on the car, or do they have to be removed and compressed?

  10. #10
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    The rear spring perches are adjustable, so you can set ride height. The rear shocks are adjustable from inside the trunk- you put a little plastic knob (included) on top of the shock body protruding into the car above the rear shocks mount and twist a set screw to firm up or soften the damping.

  11. #11
    Join Date
    Aug 2005
    Location
    KCMO
    Posts
    119
    My Cars
    89 s50'd 325i, 88 m3
    Pm sent

  12. #12
    Join Date
    Jun 2003
    Location
    NY
    Posts
    508
    My Cars
    95 m3
    These are sold. Thank you
    1995 OBD I Cosmos Black M3 - RIP: gone but not forgotten

Similar Threads

  1. Z3 E36/7 FS: Z3M TC Kline Double Adjustable Coilover Kit
    By MDICTED in forum Z3,Z4,Z8 Classifieds
    Replies: 1
    Last Post: 10-05-2016, 07:21 PM
  2. FS- TC Kline S/A coilover kit W/ Camber plates
    By M3RACER in forum BMW Parts For Sale
    Replies: 2
    Last Post: 07-27-2006, 07:08 PM
  3. FS-E46 TC Kline S/A coilover kit W/ Camber plates
    By M3RACER in forum Race Cars & Track Parts
    Replies: 0
    Last Post: 07-27-2006, 06:44 PM
  4. FS: TC Kline double adj. Coilovers E46/camber plates.
    By BMMMW14 in forum BMW Parts For Sale
    Replies: 9
    Last Post: 09-28-2005, 06:41 PM
  5. FS: TC Kline Racing Wheel Stud Kit - 58mm..
    By alexd in forum BMW Parts For Sale
    Replies: 1
    Last Post: 11-07-2002, 09:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •