HPX blow-thru maf setup, Ostrich emulator/ 413, Eboost2
EVERYTHING SOLD
HPX maf by VMP (VMP 5000). Less than 5k miles. This is the maf used by RK Tunes and others for turbo tunes.
Included with the maf is the wiring pigtail and flange already welded into an ~8 inch section of 3" pipe. $240 shipped
Also soon, I will have an ostrich emulator setup with a 413 DME for OBD1 M/S5x included. It has the maps already loaded for the HPX maf and a base tune. Just plug in and start tuning with TunerPro. $200 shipped.
Eboost2, 60mm. Not included is u-bracket (for mounting) and boost solenoid (about $35 new). $280 shipped.
I don't accept payment/ communication through Panjo because it is the plague. Contact me through bimmerforums if interested please.
List Date: 12/3/2016
For more info, click here to view the original listing: HPX blow-thru maf setup, Ostrich emulator/ 413, Eboost2
--------------------------------------
This item is no longer available.
--------------------------------------
Last edited by cj.surr; 02-23-2017 at 09:51 AM.
Are you selling the emulator with the ecu? If so, do you have all of the components for the emulator i.e. 28 pin ribbon and the usb cable?
Im in for the e-boost2 if you can show me where to get the selinoid for 35 . Best i could find was like 110. The mounting bracket is about 35 or so. Thanks
MAC part number 35A-AAA-DDBA-1BA is the same valve that most companies relabel and mark up. They sell on amazon for $35 shipped, and that includes fittings. That doesn't include the bracket but obviously there are many ways around that. Thanks.
https://www.amazon.com/MAC-35A-AAA-D.../dp/B0115Z4E5A
Eboost and Ostrich setup sold.
HPX maf setup still available.
Message me lowest on the maf
Ill take the maf. Pm Me details.
Sent from my iPhone using Tapatalk
1989 535i - sold
1999 M3 Tiag/Dove - sold
1998 M3 Turbo Arctic/black - current
2004 Built motor TiAg/Black - Sold
2008 E61 19T Turbo-Wagon - current
2011 E82 135i - S85 Swap - current
1998 M3 Cosmos S54 swapped Sedan - current
1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
Bookmarks