Originally Posted by
tripjet777
I have a 2006 BMW 325i e90 series, The problem that it is having is that it will turn over just fine but will not Start. It has a new Battery.
It has fuel pressure at the fuel rail and I can here the injectors firing, I checked the spark with a spark plug attached to the coil / boot assembly on #1 cyl. but it is not firing.
I hooked up a OBD ll tester and got codes P0344/ P0369 and P1124.
I thought it might be the crankshaft position sensor but upon cranking the engine it is showing to be turning 200rpm so I don't know it could still be bad.
Is there a fuse for the ignition coils or would the ECM come into play on this problem, I went to subscribe to ALLDATADIY.com but they do not support BMW.
I am a Technician by trade but this is my first BMW that I am having to troubleshoot.
I hope that this is a problem that can easily be fixed, I don't throw parts at it to fix it so it would be good to here some feedback from a real Technician, Thank you... TERRY
Bookmarks