...please!
It doesn't matter if they're 17" or 18"....
...RC (cast) or RCJ (forged) or even RC Motorsport Edition....
...silver painted, champagne or polished!
No need to discriminate!! Post what ya got!
i just want to see some gunmetal RC's
its an E36 but a Z3M
18x8.5 front 18x10 rears
someone needs to do 18x9 rcj's all around.
Sean
I'm thinking about going with 18x8.5" et38 RC in the front and 18x9 et42 RCJ in the back.Originally Posted by SG_M3
wow, ScottMC, what suspension are you running?
H&R coilovers.
regular or RSS CS? car looks amazing with those wheels btw.
18x9s all around has been done before with RCJs. Here are some pics. (copy and paste link into address bar)
http://www.dtmpower.net/pictures/neowerkes/DSC_4918.jpg
http://www.dtmpower.net/pictures/neowerkes/DSC_4916.jpg
http://www.dtmpower.net/pictures/neowerkes/DSC_5092.jpg
I believe all these cars belong to members here, so more pics can be found if you wish.
Here are a few:
Thanks, regular cast RC's, the 18x10 w/offset of 25 very very rare, out of production, fits our e36/7, e36/8s perfect.Originally Posted by Jshkrauss
OMG! It's been a while since something posted on bfc has made me blow a load!!Originally Posted by m3ltw98
So hot!
Any idea how big a spacer is required to fit the 18x9 up front?
No idea. I remember speaking with James Sofronas about that car and said they barely fit and he was lucky since his fenders were carbon therefore unable to "roll" them.
BTW - keep the pics comin', guys.
There's quite a few pics posted above I never came across when I did a search.
It doesn't look an easily streetable setup, either. Especially when the car is dropped approximately 2-3" in the front. Nevertheless, looks amazing!Originally Posted by m3ltw98
Todd Maurer
Past - 5 E36s, 1 E39, 1 MB W210 E320, 1 GMC 6.5 ECLB, B6 A4 3.0 6 Spd Quattro
Present - '05 E320 CDI, '06 VW TDI Jetta 5 Spd, '02 Ford F250 CCSB PSD, '02 Ducati Monster S4
Mods: 92* Thermostat, MB to BMW Wheel Adapters, 18" BMW Style 72 Wheels, Custom Mercedes-Benz Diesel Plate Frame
And mine, pre drop.
Todd Maurer
Past - 5 E36s, 1 E39, 1 MB W210 E320, 1 GMC 6.5 ECLB, B6 A4 3.0 6 Spd Quattro
Present - '05 E320 CDI, '06 VW TDI Jetta 5 Spd, '02 Ford F250 CCSB PSD, '02 Ducati Monster S4
Mods: 92* Thermostat, MB to BMW Wheel Adapters, 18" BMW Style 72 Wheels, Custom Mercedes-Benz Diesel Plate Frame
And a couple more.
Todd Maurer
Past - 5 E36s, 1 E39, 1 MB W210 E320, 1 GMC 6.5 ECLB, B6 A4 3.0 6 Spd Quattro
Present - '05 E320 CDI, '06 VW TDI Jetta 5 Spd, '02 Ford F250 CCSB PSD, '02 Ducati Monster S4
Mods: 92* Thermostat, MB to BMW Wheel Adapters, 18" BMW Style 72 Wheels, Custom Mercedes-Benz Diesel Plate Frame
from my private collection.
Sean
Wow! 18x10's on the back of that M3???Originally Posted by SG_M3
I know, doesn't even *look* like that much fender work there. Wonder what the offset of that rear wheel is.Originally Posted by Big Lun
Sean
\/ More to come shortly.
Steve
This thread rocks!
Thanks to all who have posted pics...so far.
It's probably the same wheel (size and offset) as the rear wheel on the M Coupe posted above.Originally Posted by SG_M3
I know there's another member here with 18x10 CH's (40mm offset) on his estoril 98 M3. He didn't have to do "too much work" either to get them to fit. I believe he's running a 275/35/18 SO3 tire as well.
Last edited by Big Lun; 01-05-2005 at 01:21 AM.
Bookmarks