Hi everyone, I have a 1.8 Z3 with the narrow rear, i was searching information if the 2.8 rear (the wide one) will it fit? Thank you everyone !!
You will need sideskirts, rear fenders, rear bumper, fender liners, and trailing arms were different - so you can either use wheels with a different offset or 2.8 trailing arms
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
M3 wheels from a e36 will work. I have DS2 and contours that I run on my narrow body Z.
2011 Z4
2010 MB GLK 350
2000 M Roady
1998 Lincoln Mark VIII LSC
1996 Z3
I imagine you'd need some spacers to run DS2's on a 1.9 rear with a wide body, given that such a setup has a similar setup to an M regarding where the wheel sits inside the fender.
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
I understand .. And having all that stuff, the screws and all those things will fit with my bodywork? And will my actual trailing arms fit on these tires with the new fender? (the size would be 17x8,5" offset i don't really know with the 2.8 fenders, I want to take them to the limit, not surpassing the fender, I'm from Spain and that would be a expensive homologation )
these are the wheels: http://www.imagewheels.co.uk/bps-alloy-wheel/
Did you ever end up completing this project? Did everything work out smoothly??
Bookmarks