Current BimmerForums.com member drag-race-standings!

[Mod Addict]

Congrats Greg on your 9.9

https://youtu.be/Ji7gTaf53A4

Thank you!
& Thanks again for the video

[someguy2800]

Updated, welcome to the 9 second club!

[Bke36Is]

Very nice! Welcome aboard sir! What trans are you using?

Sent from my SM-N920P using Tapatalk

[Mod Addict]

Updated, welcome to the 9 second club!

Thank you

[Mod Addict]

Very nice! Welcome aboard sir! What trans are you using?

Sent from my SM-N920P using Tapatalk

Thank you.
Im running a Racing Dynamic Rollermite C4 with a PTC converter.
Currently still using a 3.15 differential. A 3.64 will go in mid season.

[Butters Stoch]

Thank you.
Im running a Racing Dynamic Rollermite C4 with a PTC converter.
Currently still using a 3.15 differential. A 3.64 will go in mid season.

This was beautiful, effortless and perfectly is representing the BMW community for NH. Well done, honored to have seen it in person.
Clap clap (golf style)

[E36Mylo]

Thank you!
& Thanks again for the video

Congrats Greg!! I'd like to think me strapping you in and tapping the roof of the car for good luck before the pass helped. Haha this was epic

[Butters Stoch]

Congrats Greg!! I'd like to think me strapping you in and tapping the roof of the car for good luck before the pass helped. Haha this was epic

Post your slip, your good for 9th

[Mod Addict]

Congrats Greg!! I'd like to think me strapping you in and tapping the roof of the car for good luck before the pass helped. Haha this was epic

Hey man you don't know how helpful that was lol. With the harness, Windows net, cage, and neck brace I could barely move, it's crazy....
Getting in and getting situated is a massive P.I.T.A
Thanks to you and Mazen for the help otherwise I would of passed out from exhaustion.


Also a big thanks to Butters, Phil, Tyler, Travis, CES, Technique Tuning, Dynamic Racing Transmissions, DSS, R&L engines and Shafts and Stuff.
Without these guys I would have never accomplished anything close to a 9 second car.

[Bke36Is]

It'll really come to life with the 3.64! I swapped a set of 3.62s (e46 m3) into my car and I love it! I cross the stripe at 7300ish rpm with the shift light just turning on.

Sent from my SM-N920P using Tapatalk

[E36Mylo]

Excited to be on the list at all! This is my best pass from last Wednesday. S52, 6262 .63 AR, cutring, spacer, arp studs combo, 17-18 psi, 3360 lbs, pump 93, Hoosier 275 drag radials. Car still has ac and heat!! Thank you Greg and butters for giving me pointers and butters for helping me daily and answering my dumb questions and teaching me everything.



https://youtu.be/KSRCVs1VLVc

[Mod Addict]

Excited to be on the list at all! This is my best pass from last Wednesday. S52, 6262 .63 AR, cutring, spacer, arp studs combo, 17-18 psi, 3360 lbs, pump 93, Hoosier 275 drag radials. Car still has ac and heat!! Thank you Greg and butters for giving me pointers and butters for helping me daily and answering my dumb questions and teaching me everything. https://youtu.be/KSRCVs1VLVc

Very cool !
The list of fast BMW's in NH has really grown. I hope to join you again soon.

[someguy2800]

Updated:

E36Mylo added to number 5 spot and two people dropped off due to being over 2 years old

[E36Mylo]

Updated:

E36Mylo added to number 5 spot and two people dropped off due to being over 2 years old

Sweet. I'm coming for the next spot soon. Going to dial my rear Camber to 0 and hopefully get the meth kit in and up the boost.

[Butters Stoch]

Sweet. I'm coming for the next spot soon. Going to dial my rear Camber to 0 and hopefully get the meth kit in and up the boost.

Do (-0.5)

[E36Mylo]

Do (-0.5)

Roger that. I'll be doing that probably Monday.

[Bke36Is]

Sweet. I'm coming for the next spot soon. Going to dial my rear Camber to 0 and hopefully get the meth kit in and up the boost.

You'll want the best contact patch possible. It helps if you know the ppl doing your alignment and won't mind dicking around on the rack for a couple hours. I used ratchet straps on the rear of the car while it was on the alignment rack to fully compress the rear suspension then zero'd the camber. Also best if you're in the car when you do this

Sent from my SM-N920P using Tapatalk

[E36Mylo]

You'll want the best contact patch possible. It helps if you know the ppl doing your alignment and won't mind dicking around on the rack for a couple hours. I used ratchet straps on the rear of the car while it was on the alignment rack to fully compress the rear suspension then zero'd the camber. Also best if you're in the car when you do this

Sent from my SM-N920P using Tapatalk

Good idea. It's my buddy that does it for me. He has an all motor drag civic that does 10.3 all day long so he knows well how important it'll be. I'll see how busy he is and if he's willing to let me sit in the car and add weight.

[Butters Stoch]

When I did my alignment, -0.5 became 0 on the hit. 3 of us hung on the rear to squat the car.

[E36Mylo]

When I did my alignment, -0.5 became 0 on the hit. 3 of us hung on the rear to squat the car.

Cool so I'll go with that.

[Jkpgt96]

Running -0.5 out back on mine. Hooks 700+wtq from 50 on my baby 255/40-17 rs3 tires. I noticed a big improvement in traction after the new alignment..


Sent from my iPhone using Tapatalk

[crazyyardie]

IMG_3826.jpg
Update gtw3884 23 psi

[spenka]

IMG_3826.jpg
Update gtw3884 23 psi

Nice! Vernamfield! The memories!


Sent from my iPhone using Tapatalk

[someguy2800]

updated

[crazyyardie]

Are you the right or left lane?

Left lane


Sent from my iPhone using Tapatalk