Page 5 of 11 FirstFirst 1234567891011 LastLast
Results 101 to 125 of 273

Thread: Current BimmerForums.com member drag-race-standings!

  1. #101
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    your guess is as good as mine. Its just a cheap cast wheel 366 and the motor is only 2.8L. I'm guessing just under 800 at 28 lbs?


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  2. #102
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by someguy2800 View Post
    your guess is as good as mine. Its just a cheap cast wheel 366 and the motor is only 2.8L. I'm guessing just under 800 at 28 lbs?
    Sounds about right, I was making 850+ with a billet wheel s366 and small shot of nitrous thru the stock 5 speed but never dyno'd after the auto swap.

    Sent from my SM-N920P using Tapatalk

  3. #103
    Join Date
    Dec 2002
    Location
    Sydney, Australia
    Posts
    8,867
    My Cars
    1999 BMW M Coupe
    Have never understood the fun of drag racing an automatic transmission
    .-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
    BMW turbo street car Drag Racing 101

  4. #104
    MauiM3Mania's Avatar
    MauiM3Mania is offline Observer/Master Skeptic Moderator
    Join Date
    Jan 2002
    Location
    Central Pacific
    Posts
    8,897
    My Cars
    88M3 99M3 04M3 ITBx16
    Quote Originally Posted by MrBlonde View Post
    Have never understood the fun of an automatic transmission
    Everyone has a preference, eh? lol

    Project | 88M3 AW 43k miles OEM Shift Knob
    Auto-X | 99M3 Cosmos 60k S50B32 284 euro 6Spd 3.91
    Sat/Sun | 04M3 TiAg 65k non-sunroof 3 pedal
    Daily | 01X5 3.0 Schwarz 5spd manual

    Forum Rules
    New Member Info

  5. #105
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    Quote Originally Posted by MrBlonde View Post
    Have never understood the fun of drag racing an automatic transmission
    I'm over it. Just want to go fast now.


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  6. #106
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by MrBlonde View Post
    Have never understood the fun of drag racing an automatic transmission
    Once you try it you'll understand why!

    Sent from my SM-N920P using Tapatalk

  7. #107
    Join Date
    Oct 2006
    Location
    Chicopee, MA usa
    Posts
    2,867
    My Cars
    1998 M3 TURBO
    All I see are fast bmw's with s366's. Go figure .......haha. I LOVE IT. Sure you don't want to upgrade to a $2000 turbo????
    ICS Stage 1 NickG tune, 60lb Injectors, Blow through MAF, Synapse BOV, Boostlogic Manifold, BW-S366, Full 4" exhaust, Built Block w/ Wiseco's and K1 Rods = Good Times

  8. #108
    Join Date
    Oct 2006
    Location
    Chicopee, MA usa
    Posts
    2,867
    My Cars
    1998 M3 TURBO
    Quote Originally Posted by e36ALPINE View Post
    All I see are fast bmw's with s366's. Go figure .......haha. I LOVE IT. Sure you don't want to upgrade to a $2000 turbo????
    Nahhhh me either
    ICS Stage 1 NickG tune, 60lb Injectors, Blow through MAF, Synapse BOV, Boostlogic Manifold, BW-S366, Full 4" exhaust, Built Block w/ Wiseco's and K1 Rods = Good Times

  9. #109
    Join Date
    Oct 2010
    Location
    Manchester, N.H.
    Posts
    16,707
    My Cars
    96 332IS 6466 turbo
    Quote Originally Posted by e36ALPINE View Post

    Nahhhh me either
    What # are you on the street list ?
    1996 332IS
    Built 3.2
    CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
    Technique Tuning 80# tune.
    1/4 mile 10.84 @ 136.72
    Your 1 and only stop for all your BMW performance needs
    WWW.CESMOTORSPORT.COM

  10. #110
    Join Date
    Oct 2006
    Location
    Chicopee, MA usa
    Posts
    2,867
    My Cars
    1998 M3 TURBO
    Quote Originally Posted by Butters Stoch View Post
    What # are you on the street list ?
    Haha. The same number of time I've driven my car in the last 3 months. 0! Haha. Someday someday. Just pointing out a similarity that's all. If only MikeR and CES would jump on board. Then everyone would do it . But in all seriousness maybe in a couple week I'll drive the car again. Just in time for the snow to fly!!!
    ICS Stage 1 NickG tune, 60lb Injectors, Blow through MAF, Synapse BOV, Boostlogic Manifold, BW-S366, Full 4" exhaust, Built Block w/ Wiseco's and K1 Rods = Good Times

  11. #111
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    Once I get my Th400 in the car I will be going up to something like a 369sxe, or a billet S475


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  12. #112
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by someguy2800 View Post
    Once I get my Th400 in the car I will be going up to something like a 369sxe, or a billet S475
    S475 hands down!

    Sent from my SM-N920P using Tapatalk

  13. #113
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    Yeah, I'm thinking an S400 87mm turbine, .90 exhaust housing, race cover, and 75mm Forced Inductions billet compressor wheel. I'm a bit concerned about getting it to spool on the trans brake. If I have to I'll put a nitrous shot to spool it, but would really like to not have to do that.


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  14. #114
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Nitrous will help with spool up, a 75 shot should do the trick. I go from 0 to 19 psi in about 2 sec on the brake with a 75 shot

    Sent from my SM-N920P using Tapatalk

  15. #115
    Join Date
    Mar 2007
    Location
    Norristown PA
    Posts
    1,998
    My Cars
    330tti/e46m3t/01M5/Mcoup
    Quote Originally Posted by someguy2800 View Post
    Once I get my Th400 in the car I will be going up to something like a 369sxe, or a billet S475
    I'm just glad you're excited about your car again!
    www.prussianmotors.com '95 PT6262 330ti / '03 Maximum PSI M3t on e85 / '00 540 6spd / '01 M5 / '01 M Coupe

  16. #116
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    Updated with new times for Mod Addict and Butters, good work guys!


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  17. #117
    Join Date
    Apr 2006
    Location
    Manchvegas
    Posts
    2,302
    My Cars
    Boosted M3
    Quote Originally Posted by someguy2800 View Post
    Updated with new times for Mod Addict and Butters, good work guys!

    Thank you, that brings me to # 8 on the list.
    I hope to be #7 very soon
    Last edited by Mod Addict; 09-17-2016 at 08:50 AM.
    1997 Cosmos E36 M3/4/5 Boost Logic GT40/94r .85 Technique Tuning
    Stock motor

    1998 Estoril E36 M3/4/c4 Steed Speed2 Gt40/94r 1.06 Technique Tuning
    Built motor, Best ET ( 9.80 @ 140.59mph SB100+meth/25psi ) 09/01/17

    build thread:
    http://www.bimmerforums.com/forum/showthread.php?2269817-Habbit-continued-Turbo-build-V



  18. #118
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    Quote Originally Posted by Mod Addict View Post
    Thank you, that brings me to # 8 on the list.
    I hope to be #7 very soon
    A couple pounds of boost and you'll have it! That is a really good ET for 130mph in a IRS car. I have to run about 135 or so to match that ET.

    - - - Updated - - -

    Quote Originally Posted by bubela View Post
    I'm just glad you're excited about your car again!
    This has been a fun year. I've owned the car for 11 years, had a turbo on it for 10, and this is the first time I ever felt like the car is actually finished. This is only the 6th year that it's been drivable.


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  19. #119
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    New best yesterday. I put some more antisquat in the rear suspension and the track prep was really good but no other changes.



    Two passes after this I got a really amazing hook and the car did a giant wheel stand and it came down and smashed the oil pan. I couldn't see a thing and I realized it was going to be on the rear bumper so I got out of it and it came down like a brick. The track guys said the front tires were over 3 feet off the ground.


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  20. #120
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    went bracket racing last week (on low boost,broken boost controler) made it to the quarters and red lit! Check out my light in round 3 I'm in the left lane

  21. #121
    Join Date
    Mar 2002
    Location
    Jersey
    Posts
    1,947
    My Cars
    325is
    Wheelies are awesome!!! I need some 4 link action... where's the video though ?!? That's so cool brutha.
    MaximumPSI.com BMW IRS World record, 8-26-16 8.695@165mph

  22. #122
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,686
    My Cars
    86 325es
    Quote Originally Posted by BMWSOB View Post
    Wheelies are awesome!!! I need some 4 link action... where's the video though ?!? That's so cool brutha.
    Dont have one, I need to get a go pro. I really want to know how high it really was. First I couldn't see the track, then I couldn't see the scoreboards, then I couldn't see the tops of the trees and a moment later it's still going up and I realized this was going to end badly if I don't get out of it. I could just see a bit of the guard rail out the passenger window and the bleachers. It's crazy that you see guys on YouTube going down the track on two wheels not being able to see.
    Last edited by someguy2800; 10-01-2016 at 02:10 PM.


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    9.17 @ 149.33 mph, 1.30 60 foot

  23. #123
    Join Date
    Mar 2002
    Location
    Jersey
    Posts
    1,947
    My Cars
    325is
    Just look out the side window for the wall or the center line, nbd. Go pros are pretty nice, I usually forget to turn them on 50% of the time. Usually on fast passes
    MaximumPSI.com BMW IRS World record, 8-26-16 8.695@165mph

  24. #124
    Join Date
    Mar 2003
    Location
    NC
    Posts
    636
    My Cars
    CES Stage 3 Turbo M3
    Finally cracked into the 9's last night at Zmax Dragway...

    -Built E36 3.2L motor and our cutring hg/spacer combo.
    -CES Motorsport Borg Warner 9180 EFR Turbo System featuring the new E36 Steedspeed Twinscroll Bottom Mount Turbo Manifold.
    -E36 OBD1 stock ECU custom Nick G tuned
    -E36 17" rear wheels with Hoosier D.O.T. 275/40/17 Drag Radials
    -E36 ZF 5spd trans






  25. #125
    Join Date
    Aug 2015
    Location
    Boston
    Posts
    236
    My Cars
    1999 Bmw M3
    Congrats

Page 5 of 11 FirstFirst 1234567891011 LastLast

Similar Threads

  1. Current bmw drag racing standings 8-30-14
    By RBWBMW in forum Drag Racing
    Replies: 257
    Last Post: 07-16-2016, 07:25 PM
  2. Replies: 3
    Last Post: 07-15-2016, 11:14 PM
  3. Discount transportation rates for Bimmerforums.com members
    By Intercity Lines in forum Group Purchases & Supporting Vendor Specials presented by eBay
    Replies: 14
    Last Post: 10-26-2004, 04:43 PM
  4. Age Of Bimmerforum.com Members
    By wolfsburg02 in forum Off-Topic
    Replies: 102
    Last Post: 11-24-2002, 06:31 PM
  5. Bimmerforums.com members in San Diego?
    By Ben Carufel in forum Off-Topic
    Replies: 10
    Last Post: 06-24-2002, 10:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •