Page 4 of 12 FirstFirst 123456789101112 LastLast
Results 76 to 100 of 294

Thread: Current BimmerForums.com member drag-race-standings!

  1. #76
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    New personal best for me last night. I put new hoosier tires on the car and they are shaking really bad on the top end. On this pass I pedaled the car in 4th trying to stop the shake and got out of it couple hundred feet before the traps. I think I could have went mid 9's last night if I could have turned the boost up and not had to get out of it on every pass. This was at 25 lbs, spring pressure only.



    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  2. #77
    Join Date
    Oct 2010
    Location
    Manchester, N.H.
    Posts
    16,712
    My Cars
    96 332IS 6466 turbo
    Quote Originally Posted by someguy2800 View Post
    New personal best for me last night. I put new hoosier tires on the car and they are shaking really bad on the top end. On this pass I pedaled the car in 4th trying to stop the shake and got out of it couple hundred feet before the traps. I think I could have went mid 9's last night if I could have turned the boost up and not had to get out of it on every pass. This was at 25 lbs, spring pressure only.
    What is loose in the rear ? Those Hoosiers seem to be worth the swap.
    1996 332IS
    Built 3.2
    CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
    Technique Tuning 80# tune.
    1/4 mile 10.84 @ 136.72
    Your 1 and only stop for all your BMW performance needs
    WWW.CESMOTORSPORT.COM

  3. #78
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    I checked everything in the suspension and its all tight. If I sit under the car and have someone push on the quarter panels the rear end does not move at all. The back end of the car goes into this weird oscillation where one side of the car goes up then the other at a low frequency. It not like a vibration. It feels like the tires are oval shaped. The car still drives straight but its quite scary and its violent enough that it shook out my passenger side mirror glass.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  4. #79
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by someguy2800 View Post
    I checked everything in the suspension and its all tight. If I sit under the car and have someone push on the quarter panels the rear end does not move at all. The back end of the car goes into this weird oscillation where one side of the car goes up then the other at a low frequency. It not like a vibration. It feels like the tires are oval shaped. The car still drives straight but its quite scary and its violent enough that it shook out my passenger side mirror glass.
    Which Hoosiers are you using and what tire pressure?

    Sent from my SM-N920P using Tapatalk

  5. #80
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    325/50-15 drag radials. 16, 18, and 21 psi. When I test drove it on the new tires I had 25 in them and had no shake at 150.

    - - - Updated - - -

    I just called hoosier and they told me everyone is gone to the US Nationals so there won't be anybody to talk to till tuesday. WTF?


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  6. #81
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    That's the biggest race of the year so most everyone in the drag racing industry will be closed till next week. I'd ditch the radials and go with a full slick they're more forgiving than a radial on a manual car as for the vibration I'd check the driveshaft and axles thoroughly. I had something similar happen to me and it turned out to be a busted u joint in the ds

    Sent from my SM-N920P using Tapatalk

  7. #82
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    Its not a driveline vibration. The whole back of the car is oscillating up and down and side to side by several inches. It nuts.

    - - - Updated - - -

    I am thinking hard about the bias ply's as much as I don't want to. I will be going auto this winter anyway. There are only a couple days of racing left and I'm pretty strapped for cash.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  8. #83
    Join Date
    Oct 2010
    Location
    Manchester, N.H.
    Posts
    16,712
    My Cars
    96 332IS 6466 turbo
    Quote Originally Posted by someguy2800 View Post
    I'm pretty strapped for cash.
    I know someone with a set of slicks and fronts, that would probably work something out.

    Contact this guy, he is kinda a prick, but never know.
    http://www.bimmerforums.com/forum/sh...ag-Slick-setup
    Those same tires have held huge power. I believe this guys ^^ are brand new.
    Last edited by Butters Stoch; 09-01-2016 at 05:34 PM.
    1996 332IS
    Built 3.2
    CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
    Technique Tuning 80# tune.
    1/4 mile 10.84 @ 136.72
    Your 1 and only stop for all your BMW performance needs
    WWW.CESMOTORSPORT.COM

  9. #84
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    Tell that guy his tires are tiny and the wheels are the wrong bolt pattern. Need something more along these lines

    http://www.jegs.com/i/Hoosier/522/17606QTP/10002/-1

    I love love love how my radials drive but I'm getting tired swimming upstream. I think I'm going to bite the bullet on this.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  10. #85
    Join Date
    Aug 2015
    Location
    Boston
    Posts
    236
    My Cars
    1999 Bmw M3
    Tires too hot would make car unstable, are you heating them with a huge burnout?

  11. #86
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    No

    - - - Updated - - -

    Good news, I called jegs who I bought them from and they put me through to one of there techs and I described the situation. They are going to take the tires back on return and even offered to provide the shipping labels for free. I will be buying a set of bias slicks tonight from them. This is why you buy your stuff from a reputable supplier. Jegs and Summit have always treated me well.

    - - - Updated - - -

    Two of these on there way.

    http://www.jegs.com/i/Mickey-Thompso...30551/10002/-1

    Never thought I would ever be giving up my beloved radials lol.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  12. #87
    Join Date
    Mar 2002
    Location
    Jersey
    Posts
    1,947
    My Cars
    325is
    Quote Originally Posted by someguy2800 View Post
    Never thought I would ever be giving up my beloved radials lol.
    Et drags make fine street tires
    MaximumPSI.com BMW IRS World record, 8-26-16 8.695@165mph

  13. #88
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    Made the switch to slicks. Got a set of mickey thompson 28x10.5w-15 stiff wall slicks. I mounted them myself on a manual tire changer and glued the beads on the rim with Permatex hi tack, as SOB suggested. I couldn't be happier with them. They hook so much better than the radials its unbelievable and on my car were not unstable at all even with street radials on the fron. With the drag radials I had to slip the clutch way out of the hole with no boost and if the boost came on too hard it would spin. Now I can clutch out way harder and leave with 20 lbs of boost on the launch control. I got booted off the track for not having my nhra licence so only got to make one full pass with launch control. I missed third gear really bad but ran it out anyway.



    mounted slick on left, mounted 325/50-15 radials on right



    Last edited by someguy2800; 09-07-2016 at 10:40 PM.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  14. #89
    Join Date
    Mar 2002
    Location
    Jersey
    Posts
    1,947
    My Cars
    325is
    Ha ha ! Hell yes ! Get them license runs ! You don't even need a physical anymore
    MaximumPSI.com BMW IRS World record, 8-26-16 8.695@165mph

  15. #90
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by BMWSOB View Post
    Ha ha ! Hell yes ! Get them license runs ! You don't even need a physical anymore
    Yessir! Going for mine next week God willing!

    Sent from my SM-N920P using Tapatalk

  16. #91
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    Here is a video from yesterday. Someone at the track took it and emailed it to me

    https://youtu.be/JLbHWU7bYE0



    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  17. #92
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Awesome video congrats on the pb! What transmission are you running?

    Sent from my SM-N920P using Tapatalk

  18. #93
    Join Date
    Mar 2007
    Location
    Norristown PA
    Posts
    2,137
    My Cars
    mostly bmw
    I dunno. Looks to me like e30's were meant to be drag cars.
    95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
    Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring

  19. #94
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by bubela View Post
    I dunno. Looks to me like e30's were meant to be drag cars.
    So what shall i do with the e36??

    Sent from my SM-N920P using Tapatalk

  20. #95
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    T56 magnum 6 speed manual. Soon to be TH400

    http://www.tremec.com/menu.php?m=104


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  21. #96
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Going auto should put you into the 8s! I went from running 9.8 with the stock 5 speed to running 9.0 with the glide! I should've done it years ago I would've saved myself allot of headaches!

    Sent from my SM-N920P using Tapatalk

  22. #97
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    yeah the goal was always to run mid 9's on the stick and then swap to auto and go for 8's. I think I am only a can of VHT away from mid 9's now. The video above was on a no prep street legal night. They didn't even drag it.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  23. #98
    Join Date
    Dec 2002
    Location
    Sydney, Australia
    Posts
    8,874
    My Cars
    1999 BMW M Coupe
    Eights realistic ...
    .-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
    BMW turbo street car Drag Racing 101

  24. #99
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    Quote Originally Posted by MrBlonde View Post
    Eights realistic ...
    I can't do it with a stick, but an auto should get it done. I'm about tapped out without getting some more power in the car. As it is with a couple pounds more boost I would love to do 9.5x with a 1.2x 60 foot.

    These were my runs from yesterday

    9.753 @ 144.61
    9.791 @ 145.41
    9.842 @ 140.55 (had to get out of it)
    9.804 @ 139.85 (had to get out of it)
    9.857 @ 148.74
    9.818 @ 148.43
    9.800 @ 148.23

    New best 60 foot time of 1.31. Track was getting very loose after the first couple passes


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  25. #100
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Quote Originally Posted by someguy2800 View Post
    I can't do it with a stick, but an auto should get it done. I'm about tapped out without getting some more power in the car. As it is with a couple pounds more boost I would love to do 9.5x with a 1.2x 60 foot.

    These were my runs from yesterday

    9.753 @ 144.61
    9.791 @ 145.41
    9.842 @ 140.55 (had to get out of it)
    9.804 @ 139.85 (had to get out of it)
    9.857 @ 148.74
    9.818 @ 148.43
    9.800 @ 148.23

    New best 60 foot time of 1.31. Track was getting very loose after the first couple passes
    How much power does it put down?

    Sent from my SM-N920P using Tapatalk

Page 4 of 12 FirstFirst 123456789101112 LastLast

Similar Threads

  1. Current bmw drag racing standings 8-30-14
    By RBWBMW in forum Drag Racing
    Replies: 257
    Last Post: 07-16-2016, 07:25 PM
  2. Replies: 3
    Last Post: 07-15-2016, 11:14 PM
  3. Discount transportation rates for Bimmerforums.com members
    By Intercity Lines in forum Group Purchases & Supporting Vendor Specials presented by eBay
    Replies: 14
    Last Post: 10-26-2004, 04:43 PM
  4. Age Of Bimmerforum.com Members
    By wolfsburg02 in forum Off-Topic
    Replies: 102
    Last Post: 11-24-2002, 06:31 PM
  5. Bimmerforums.com members in San Diego?
    By Ben Carufel in forum Off-Topic
    Replies: 10
    Last Post: 06-24-2002, 10:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •