[QUOTE=E36Mylo;29843664]Moving up to the next spot!! Went and practiced some more on the new wastegate spring. 11.200 @130 mph There is still more boost to be thrown at the car and a much better 60' could have been had. This was 19-20 psi.
Number 4 on the list! Nice..
1997 Cosmos E36 M3/4/5 Boost Logic GT40/94r .85 Technique Tuning
Stock motor
1998 Estoril E36 M3/4/c4 Steed Speed2 Gt40/94r 1.06 Technique Tuning,
Built motor, Best ET ( 9.63 @ 142.61 mph MS100+meth ) 10/08/21
Best mph ( 10.08 @ 144.66mph MS100+meth ) 9/18/19
build thread:
http://www.bimmerforums.com/forum/showthread.php?2269817-Habbit-continued-Turbo-build-V
2001 E46 330i
M54B30
CP 8.5:1 pistons
Stock Rods
Stock Crank
ATI Crank Damper
Coated OEM bearings
Raceware main studs
GSR Oil Pump
Ported Cylinder Head (Erland Cox)
Supertech valves (34mm Intake, 30.5mm Exhaust)
Schrick double valve springs
Schrick titanium retainers
Schrick 272/256 cams
OEM hydraulic lifters
Elring Head gasket
Raceware 11mm head studs
Stock M54B30 intake manifold
Stock M54B30 throttle body
Steed Speed Twin Scroll exhaust manifold
Garrett GTX3076R turbo with 1.06 A/R twin scroll housing
3" Downpipe, and full exhaust with 3 Magnaflow mufflers (12", 18", and 24")
4" Turbo inlet pipe with 6" X 12" K&N air filter
Tial MVR wastegate
1.75" WG Pipe recirculated
Synapse Engineering Bypass Valve
20" X 12" X 3" Intercooler
Aquamist Water/Meth system (1 X Pre Turbo, 2 X Pre Intake Manifold)
WON Nitrous system - Single nozzle 75 shot (Dry)
CM-850 twindisc clutch and steel flywheel
ZF S5D 320Z 5 speed transmission (Stock)
OEM driveshaft
OEM 3.46 open Diff (No LSD)
DSS Axles
Hoosier Drag Radials (245/45/17)
Motec M150 ECU
Bosch 630cc injectors
A1000 Fuel pump
102 Octane fuel (Mix of 114 and 91 octane)
19 PSI Boost (41+ PSI exhaust backpressure!)
Build: https://www.bimmerforums.com/forum/s...c-M54B30-Turbo
Last edited by PEI330Ci; 10-03-2017 at 06:02 AM.
Damn that's moving n u got an open diff.
Sent from my iPhone using Tapatalk
Thanks!
I think I could have got into the 10s with an LSD, and 1 simple change to the tuning while still using the GTX3076R turbo.
In total, there was 2.59 seconds of the run where the 75 shot of nitrous is not on while at WOT accelerating.
Also, I feel like there was at least 0.2 seconds in the 60ft...which translates pretty strongly at the top end ET wise.
We'll never know though....as I've since changed the turbo. (And also added a 3.62 LSD)
What turbo u changed to
Sent from my iPhone using Tapatalk
2017051295230644[1].jpgResized95LRM95EXPORT952017042295182714[1].jpg
Update this is from June of this year. Da that day was 7,900 ill have a 9s pass real soon
10.1@142
BMW MAKES IT CHEVY SHAKES IT #KEEPdreaming Youtube https://www.youtube.com/channel/UCYP...-oQyhdTwr58mwg
ALL THE LOVE http://bangshift.com/bangshift1320/t...c-use-perfect/ http://www.1320video.com/franken-bim...own-chevy-bmw/
10.1@142mph @ DA 7900 ft
355 SBC Blown E85 Spray Street car https://www.instagram.com/p/BGpx4nVPlMC/?hl=en
FOLLOW ME ON FB https://www.facebook.com/frankenbimm...haltitudewhips
Another update!!!!! 10 Second club finally!
https://youtu.be/K5Ivpx0yIaY
1997 Cosmos E36 M3/4/5 Boost Logic GT40/94r .85 Technique Tuning
Stock motor
1998 Estoril E36 M3/4/c4 Steed Speed2 Gt40/94r 1.06 Technique Tuning,
Built motor, Best ET ( 9.63 @ 142.61 mph MS100+meth ) 10/08/21
Best mph ( 10.08 @ 144.66mph MS100+meth ) 9/18/19
build thread:
http://www.bimmerforums.com/forum/showthread.php?2269817-Habbit-continued-Turbo-build-V
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
Records should stay, regardless of time! That's why they are records!
Anyways, I'd like to add the F80 to the list:
97 M3 - 8.94@164 - 8 sec street machine, all BMW driveline, factory ECU
02 M3 - 9.74@145 - Maximum PSI stage 2 turbo kit, stock motor, factory ECU
16 M3 - 9.3@151 - Built motor/twins
15 M3 - 9.2@162 - Built motor/single turbo/Ecutek
BMW SOB's turbo E30 - 8.72@158.39
follow our latest builds and upcoming events! - facebook.com/maximumpsi - instagram.com/maximumpsi
11.09 @ 137
96 328is
M52B28 S50 Cams
PTE 6766 @ 33psi
E85
666 bottom mount
5 speed zf
Quarter Master twin disc
AEM Infinity KHP Calibration
Nitto NT01 255 40 17
The medium case diff decided to separate itself from the subframe on this pass
thread link
https://www.bimmerforums.com/forum/s...-E85-Money-Pit
Last edited by vincedahl; 03-16-2018 at 08:50 AM.
When I was a scrutineer at the drag strip over here anything that ran sub 12s needed a cage...
That was quite some time ago now
Sent from my G8141 using Tapatalk
Yea our local track is super strict. Anything 9.99 or 135+ needs a 10pt cage, battery kill switch, trans and engine diaper, driveshaft loop, net, full gear, Nhra 9 second license.
Last edited by vincedahl; 03-16-2018 at 08:57 AM. Reason: images were not working
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Bookmarks