Has anybody tried running 28" tall tires in the back of an e36 yet? Ive read people saying it wont fit, but measuring clearance i have now it looks like it would, also RBWBMW ran them in his e30.
Dasboot runs 28" iirc. Its much easier to fit 26"
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
World record holder for a m52 stock bottom end.
9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp
E36 chassis irs world record holder 8.49@162
Th400, e85, 7685, m50 intake 26.6 lbs of boost
Yeah i was hoping to do it without major bodywork, otherwise id get fender flares and run wider. I was looking at the 275/55r16 m&h drag radials as they seem to run narrower, but i guess thats out of the question now.
You're not going to fit 28" without modifications ... unless you've got a 335 .. those lucky buggers can fit 28".
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
World record holder for a m52 stock bottom end.
9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp
E36 chassis irs world record holder 8.49@162
Th400, e85, 7685, m50 intake 26.6 lbs of boost
275 60 16
about 11.5 at its widest point.
World record holder for a m52 stock bottom end.
9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp
E36 chassis irs world record holder 8.49@162
Th400, e85, 7685, m50 intake 26.6 lbs of boost
thats a good amount of rubber lol. I was looking into these flares http://jdmflares.com/WIDE_ZG_FLARES.html , one of the drifters on this site is running them. If my estimates are correct 315 width should be able to fit in the back with those flares
Yeah they would likley clear with those.
World record holder for a m52 stock bottom end.
9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp
E36 chassis irs world record holder 8.49@162
Th400, e85, 7685, m50 intake 26.6 lbs of boost
Yep fender will need some love. But depending on low u want the rear to sit but ya 28" will fit
BMW MAKES IT CHEVY SHAKES IT #KEEPdreaming Youtube https://www.youtube.com/channel/UCYP...-oQyhdTwr58mwg
ALL THE LOVE http://bangshift.com/bangshift1320/t...c-use-perfect/ http://www.1320video.com/franken-bim...own-chevy-bmw/
10.1@142mph @ DA 7900 ft
355 SBC Blown E85 Spray Street car https://www.instagram.com/p/BGpx4nVPlMC/?hl=en
FOLLOW ME ON FB https://www.facebook.com/frankenbimm...haltitudewhips
Whats the wheel specs?
Amiran P.
95'M3 S54 3.5L
World record holder for a m52 stock bottom end.
9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp
E36 chassis irs world record holder 8.49@162
Th400, e85, 7685, m50 intake 26.6 lbs of boost
Gonna try and revive this thread. Is anybody succesfully running 28" tires (with fender flares)?
Bookmarks