Celis clear/red touring tails question

**RSBBlackM3** · 07-02-2016, 07:15 PM

Ah right on, sounds like some skill and experience talking too. Probably not best for a novice to try it. I resolved it with the clear anyhow which will work out fine.

Just got back from coding, got it done no problem and lowered the rear a little more too. Forgot to screw with servotronic, next time.

**Plattus1000** · 07-03-2016, 01:45 PM

Originally Posted by RSBBlackM3

Dude thanks! So don't wet sand it at all, just go coarse wool, then compound with the da to polish, and finish. Can I use my table buffer? \/

Cool pics are coming soon. One of my pals is a photogeek, got him cornered into a shoot as soon as my bbk goes on!

Being fair, if you have the time, the different grit sandpaper and patience to do a thorough job, wetsanding is an almost sure way to make them look their best. If you can achieve a "10" with sandpaper, you can achieve a "9.9 with a polisher and compound.

I prefer to use polishers when I'm not faced with a flat surface, anything with and curve or contour.

RVAE34's suggestion wasn't bogus at all, I just thought I'd offer another solution. I should have said this in my first post.