Got any working coupe tail lights in good shape if so how much shipped to 07740?
PM'ed all
Need 11 button obc with no dead pixels, have any ?
Looking for a pair of sedan M3 mirrors!
1992 E36 325i
Do you have an Idle control valve? And perferably one that you know is in working condition. For S52?
Hey. Do you have a drivers side door panel for 2dr convertible ?
Sent from my iPhone using Tapatalk
I'm sure all the door panels are gone, but on the hunt for a good tan drivers side panel. also a good 5 speed driveshaft.
I have a black driver's panel and both driver and passenger tan panels all pre-airbag in excellent shape.
I will rebuild the panels after removal as the brackets generally come off when removing. All brackets etc will be gorilla glued and hold up great. I've done the same on my daily driver. My photobucket is acting up so send an email request to my email grfranklin@ yahoo.com and I can send you pictures.
Panels are not cheap $100 for each panel + shipping
Thanks,
Greg
still looking for :looking for the driver side door gasket that goes all the way around. No rips please
Any clean sedan trunk gaskets? and driver door gasket? Mine are toast.
'13 FoST (FWD is pretty fun to daily, plus killer MPG)
'98 M3
And Many other very missed E36's i've owned and regretfully sold..
im looking for some e36 parts if your still parting out. I'm looking for the following
1.E36 condenser fan motor.
2. E36 e36 alarm siren
3. E36 glove box light.
PM'ed all
I'm looking for the following
1) Converting fully automatic roof to manual (latches, cables, and hardware to convert my tonneau cover from auto to manual).
2) Center air vent
Thanks,
PM'ed
I now only have the tonneau manual parts. I also have a good center vent
Looking for a wiring harness for an M/S52 OBD2 engine. Needs to be clean and uncut. anything you might have?
Thanks
"**if you suck at driving, it certainly could put you into a curb. Don't suck."
-Looking for front amber turn signals
-engine cover screw caps
-passenger inside door handle to open door
Sent from my iPhone using Tapatalk
()()===[][]===()()
pm'd
always trying to make it lighter and faster
^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
current build: http://forums.pelicanparts.com/porsc...car-build.html
instant grams: doktor_b
dang it i wish i was close enough to pick up one of those hard tops.
PM'ed all
Thanks,
Do you have both control arms for a coupe?
3 SERIES ALL THE WAY
Bookmarks