Thanks for clarifying, that makes sense. I recall reading something like that some time ago but forgot about it. When I got my car it was running 134a so I'm not sure if my hoses have been replaced. I did notice a while back that when driving air seeps through the vents even if I turn the AC off. Not sure if it has anything to do with this or if it's something completely different. Thanks for pointing this out, I'll add it to my to do list.
I'm going through this too and I'm wondering... if I'm converting to R134a and replacing the expansion valve do I use the OEM part or do I need to get an expansion valve rated for a higher pressure? Haven't seen mention of a different part # in any of the threads but seems like it would need to operate at a higher pressure with R134a.
Just PM'ed you about the compressor.
[QUOTE=IB635;29290209]Thanks flyfisherman. Just out of curiosity, what is the advantage of the Sanden over the Bosch??..
In my (limited) online research, the Bosch for the e24 is actually a re-manufactured unit by Four Seasons and received poor reviews on the Pelican parts website. The Sanden was recommended in several A/C threads on this forum and was approximately $100 less expensive.
- - - Updated - - -
On autohauz and eBay they have some listed as "for 134a". Don't know the difference between them though.
For or those of you who have replaced the expansion valve, does it simply just bolt on for you guys? Mine doesn't and all the valves that I've ordered are the same size so I'm guessing someone replaced the pipe for the front expansion valve on mine and had custom ones put in. Are there any similar cars that I could get a similar pipe or places I could get One from? I have the adapter but I want to avoid using it if possible because it might leak.
Best A/C upgrade? Tinted windows. There is a LOT of glass.
My stock A/C, which I have never touched, blows very cold on even hot days (it is front only version, of course). But when a puffed-up DMV cop made me remove my tint before he would sign off on the import title (yes, it had nothing to do with it, he was a jerk and obviously not happy being assigned to his job in a trailer, and making everyone else pay for it), I noticed it made a big difference. It still is cold but if the sun is shining directly through the windows on you it is not quite enough. I still have the factory bronze-tinted windows which look cool, but don't block enough sun.
'84 Euro 635CSi Polaris/Pacific, for sale (maybe)
Home of the Silver Bimmers: '91 M5, '84 Euro E24, "99 E36, "98 E36, '02 E46 xiT (yes, all silver)
Agreed on the tint. I'm still pissed that I had a motorcycle cop give me a fix-it-ticket to remove for the factory light blue tint on mine a few years back. F-ing guys were just out doing a blanket sweep, had a bike cop on every corner just ticketing people for whatever they could. Car had driven around SoCal for 27 years with it, and no problem. Grrrr....
The one I ordered had the same connections and looks the same just shinier.
Old one:
IMG_1169.jpg
New one:
IMG_1172.jpg
Some general things to understand about a conversion to r134 are the following.
Most mechanical parts/components from an R12 system can be reused.
R12 and R134 use non-compatible oils that will turn to sludge if you mix them. You must flush out the system in order to remove all the r12 compatible oil.
since proper flushing requires removal of the expansion valve, you will be able to clean it, or just replace if you prefer.
There are two things you really should change out. First is any soft hoses. The inside could be saturated with old oil, but more important is that the molecules of R134 are smaller than R12. Modern hoses have a barrier layer that keeps the R134 from seeping through. You will also need to replace the receiver/dryer.
One last thing to understand is that the Sanden pump is designed for R134 and is a really well made, multi-piston pump. It is a really common model, which makes it much cheaper than the Bosch. Availability, reliability and cost are the reasons for choosing the Sanden.
Jose
Last edited by DaHose; 06-19-2016 at 02:08 PM.
1987 M6
Livin the dream!
One thing I neglected to mention above: The compressor I replaced with the Sanden was not a Bosch. It had a BMW label and BMW part number but also a label that read SEIKO/SEIKI made in Japan. I do not know if it was the original compressor or not. It could have been - the car had never been converted to R134 before I bought it. Even if it was a replacement it appears it came off the BMW parts shelf.
Im glad this new post came up because i need to refresh my A/C as well. Are all these parts compatible with the 81 cars as well? Such as the Sanden, the parallel flow, brackets etc? Its been 114F here and its hell.
Last edited by n2bimmer; 06-24-2016 at 10:06 AM.
"Understeer is when you hit the wall with the front of the car, Oversteer is when you hit the wall with the rear of the car, Horsepower is how fast you hit the wall, Torque is how far you take the wall with you."
Maybe no one's ordered a generic condenser in a while. I'm willing to be the guinea pig and try one of the 16 x 19" ones out there now but it will be a few weeks before I get to that point.
Mounting will have to be custom for any of them. I think as long as you can fit one in at least as big as the original it's ok. Might be worth calling Vintage Air or one of those places to see if they have done an e24/e28 and if they have any advice.
I have the custom-made PF condensor from Classic Auto Air, and it was a direct bolt-on. But, it was $320, and if I had to do this again, I'd buy a generic and would have saved $200+. You can buy material to make your own brackets at Lowes, Home Depot, etc., and there's really not much to it. Even with the condensor I bought, new hoses were needed because of the different compressor, so that's not a consideration. Get the biggest one that will fit, along with the highest CFM fan you can fit.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Thanks will do. Would you happen to remember the size of your Condensor? Was it 16x19? I'll look into a fan too while I'm at it.
same here. If you happen to get your hands on one before I do let me know if it does work out.
Not sure. I've mostly seen these done in the e28 based e24s but it can be done. I would think that they'd use the same size Condensor but I'm really not sure about the brackets and the compressor.
Last edited by hakeem43020; 06-25-2016 at 04:04 AM.
The Classic Auto Air PF condensor is the same size as the original, and you can see they took a generic and riveted on the brackets and brazed on hose fitting extensions to make it appear as original as possible.
Last edited by dcains; 06-25-2016 at 06:08 AM.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Thanks for those photos Dean. Looks like a local shop could braze adapter fittings onto a generic, and you'd still be well under $300..
Just get your hoses made to match the condensor - you need them anyway.
Dean
Lutz, FL
'85 635 CSi Euro #9402254
'87 Spider Veloce
'92 Spider Veloce
'08 350Z
Got the compressor custom brackets today. Got it fast considering it shipped on Wednesday.
image.jpg
The A/C is the single most frustrating thing about this car. Considering it was a luxury sports coupe, it should have been designed better. It's pretty much unfixable due to the vent configuration. I mean really, out of a possible 11 vents (counting the defrost vent as 1) you can only have cold air coming out of 2. It's ridiculous. An under-dash evaporator like those that came in 60's cars would be better. Or maybe connect a hose to the vent and stuff it in your shirt.
There's always the swamp cooler. Just don't stop for anything and you'll keep a nice cool moist breeze coming...
bmw-swampcooler.jpg
So did BMW ever put a good A/C system in any of the sixers?
Bookmarks