Hey guys. Able to read keys but can't read the EWS. I have the OD46J chip. I have been at this for several days. I cleaned off all the pins with box cutter, ordered another ribbon cable and even tried reversing the cable on the chip but nothing goes. I even cut the small tabs inside the connector so that the chip fits snug. Used 3.02 and 3.19.
All I get is "pin no touch".
Any ideas? I got three blank keys ready to be programmed and only have one key that I got with the car (valet).
Thanks.
What that means is that one or more pins are not in contact.
--
Nick
46dj is easy to read with k-line tool. One point and done
Buy my native installed ISIS ISTA-D/ISTA-P bmw diagnostic laptop. More Info Here!
Bookmarks