1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
OK, I have updated the OBD2 list.
It looks like we're ready to green light production on the hold down brackets as well.
Matt Cramer
1997 BMW 328i convertible, 1972 Chevy C10 pickup, 1966 Dodge Dart slant six
BMW - where "Why doesn't everybody build cars the way they do?" meets "Why can't they build a car the same way everyone else does it?"
good sir Mr. Cramer please add me to the obd-II list.
Matt, is the rest of the information in the first post updated as well as far as OBDII pricing, capabilities, etc.? What about those dates listed in that first post, are those old dates? I'm on the fence for OBDII currently, just curious about a few details to push me one way or the other.
Matt Cramer
1997 BMW 328i convertible, 1972 Chevy C10 pickup, 1966 Dodge Dart slant six
BMW - where "Why doesn't everybody build cars the way they do?" meets "Why can't they build a car the same way everyone else does it?"
Any chance the V8s could get some love after this one? If I remember right there was actually a dual purpose ms adapter board going around for the m50 and m60 so i would think a lot of the leg work you already did could be carried over. I need to dig in my parts closet and confirm but I'm fairly certain it could be used for both with slight modifications. Probably wouldn't be ready in time to save me making a harness but just a thought.
95 325- s/c S50 01 X5-daily 95 840ci- boost incoming
I think it might be true that such a thing would also work for the '97 540 with the M62b44 and 88-pin connector M5.2 DME. It seems that in '98 the 540s went to a different DME connector with the M5.2.1 DME.
they would sell 4 units.
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
Yeah I realize the market isn't huge which is why I mentioned possibly being able to piggyback off of the existing work they already did on the obd1 setup. Just figured it never hurts to ask.
95 325- s/c S50 01 X5-daily 95 840ci- boost incoming
Oh yeah, those would be OBD1... Maybe they'd only sell 3 units then.. Lol
I would tentatively like to have my name on the OBD2 list. I'm not 100% sure what the next few months will be for me and my car but at this point it would make more sense to sell my MS3X and get a PNP.
1997 328is - Megasquirt PNP, Holset HX35, Deka 80lb injectors, SPA T3, Precision PW39 WG, Synapse Synchronic BOV, DKM Organic Twin Disc Clutch, Innovate LC-2 W/B, Mishimoto Intercooler, Mishimoto Catch Can, Mishimoto Rad, Devils Own Meth, Porsche 911 calipers with E46 M3 rotors, Corsa Exhaust
Any updates on the mounting brackets?
1994 325is- M52 swap, Fan delete, AA chip, CAI, TC-Kline DA, H&R 28mm front sway, Kevin Higgins exhaust, kosei k1 17x8.5's with RA1's, DS2's with REO1R's, 3.23 lsd
Matt Cramer
1997 BMW 328i convertible, 1972 Chevy C10 pickup, 1966 Dodge Dart slant six
BMW - where "Why doesn't everybody build cars the way they do?" meets "Why can't they build a car the same way everyone else does it?"
Mid November status report?
Also what is the difference between this PnP vs PBAtune.com MS3 PnP?
98 Fern Green M3/2 - Precision 6870/AR Designs Twin Scroll/RK/E85
2017 Toyota Tundra Crewmaxx - Family Whip
2011 Pierce 75' Quint - Fire Apparatus West Islip FD
You can’t buy the Link, you can only put it on your wishlist. Fantasy PNP ECUs.
i believe he is referring to Asser who builds the jumper harness for obd2 PNP to MS3Pro
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow my builds on youtube and IG.
www.youtube.com/thenameskam
@thenameskam on IG
U need to find an store near u ! otherwise u will pay for delibery pretty much!!! the same goes for everything. been having some issues and had to get some human growth hormone for myself. the same goes for everything at all when it comes to money.
Last edited by Sawley; 12-18-2017 at 03:24 PM.
If this is coming to fruition with OBD2 cars.
You can put me on the list for one.
Are we getting good OBDII Christmas presents this year Matt Cramer?
98 Fern Green M3/2 - Precision 6870/AR Designs Twin Scroll/RK/E85
2017 Toyota Tundra Crewmaxx - Family Whip
2011 Pierce 75' Quint - Fire Apparatus West Islip FD
Just a little prompt for anyone is on the fence about getting on this list, DO IT!!
I've been running my MS3+MS3X setup in full sequential on my 540 turbo at up to 19psi, and the thing just runs amazingly well compared to what was feasible with the DME. So much that I took advantage of DIY's Black Friday sale -- or is it actually them taking advantage of me once a year? -- and bought another full MS3+MS3X kit, plus 6 BIP373 mod kits, and both harnesses so I can build another setup for my E36. The E36 has been great with MS41 RomRaider, but it still can't come close to matching the MS3 setup .
I kind of like building my own MegaSquirt ECUs, even though sometimes I hate it lol (and it's a bit cheaper), otherwise I probably would have been looking to take full advantage of this upcoming OBDII MSPNP. If you're on the fence, get on the list, you'll LOVE MS3 functionality.
Matt- Please add me to OBD 2 list. Thanks
Is the "986 262 338" OBD1 DME compatible? I heard it is the same thing as the 413 everyone seems to have
Sent from my SM-G955U using Tapatalk
Bookmarks