E36 Hater's Phase 3, AKA what's a budget build?

[someguy2800]

That an oem cummins oil drain isn't it?

[E36 HateR]

That's what she said


Sent from my iPhone using Tapatalk

lol set myself up i guess

Pretty snazzy oil return line there!

That an oem cummins oil drain isn't it?

Yes! I was actually having issues with the -10an line, the cummins drain is much wider, no nore drain issues

[BTTYWHTE]

Went over the wrap again and got it nice and tight.

What manifold are you running? Almost looks like a flipped eBay unit

[acbx]

Nice to see progress on this car again!! Been following/lurking since the original setup. They were motivation for me boosting my car lol.

[tptrsn]

What year and model vehicle can I look at on RockAuto to snag one of those drains? I assume you can bend it exactly where you want it routed?

I see a similar looking drain tube listed for a 2005 Ram 2500 with the 5.9L, but it says it's only .7 feet long. The one in your picture appears longer than that, like maybe a couple feet long.

EDIT: Maybe it's something like this 25" one:

http://www.ebay.com/itm/Turbo-Oil-Dr...sAAOSwdU1W8yZu

Or like this 21" one?:

https://puredieselpower.com/dodge-pr...il-trucks.html

[E36 HateR]

What manifold are you running? Almost looks like a flipped eBay unit

Its a custom tubular twin scroll top mount from cgarage in poland.

Nice to see progress on this car again!! Been following/lurking since the original setup. They were motivation for me boosting my car lol.

Thanks man! Just trying to get it rolling!

What year and model vehicle can I look at on RockAuto to snag one of those drains? I assume you can bend it exactly where you want it routed?

I see a similar looking drain tube listed for a 2005 Ram 2500 with the 5.9L, but it says it's only .7 feet long. The one in your picture appears longer than that, like maybe a couple feet long.

EDIT: Maybe it's something like this 25" one:

http://www.ebay.com/itm/Turbo-Oil-Dr...sAAOSwdU1W8yZu

Or like this 21" one?:

https://puredieselpower.com/dodge-pr...il-trucks.html

It looks like the first one, i remember paying a very similar price.



Got the brackets made for the cell to bolt it down in the trunk, and bracket made for the fuel pump, today a local shop and friends of mine made the lines with my measurements and specs.

Im really happy with how it is all coming together.

[NOTORIOUS VR]

Racekor!

[E36 HateR]

Racekor!

Slowly getting there lol, 4 point and parachute with a 7675 are next ��

[someguy2800]

Chicks did roll cages. Well, not mine or any of them I ever met but I am sure there are some out that get freaky over it.

[NY98M3]

Check NHRA rules, I think they told me I needed a 5 point last time I hit the drag strip.

[Bke36Is]

Check NHRA rules, I think they told me I needed a 5 point last time I hit the drag strip.

Correct sir. 4 points are not legal must be a 5 point

Sent from my SM-N920P using Tapatalk

[E36 HateR]

Finally got her started tonight, idled fine, needs a fine look over and then a few tests.

[dburt86]

that 240 has quiet the tire on it lol

Car looks good. Should be out soon!

[90awdtsi]

for the holset oil drain line. how did you connect the end of the drain to your oil pan?

[E36 HateR]

for the holset oil drain line. how did you connect the end of the drain to your oil pan?

With a rubber hose and a lsrge drain fitting.

[E36 HateR]

Finally done.

[dburt86]

fug yeah

[acbx]

Siiiiiick

[doktor b]

Wheelies

[E36 HateR]

On my way to zmax in NC

[PEI330Ci]

Have fun! Awesome to see this car back in action...

[Butters Stoch]

That's a long haul to go drag racing ? Or is this some event ?

[Bke36Is]

He's going to streetcar takeover

Sent from my SM-N920P using Tapatalk

[E36 HateR]

Have fun! Awesome to see this car back in action...

Thanks! Me too

He's going to streetcar takeover

Sent from my SM-N920P using Tapatalk

Yea they canceled the event yesterday rightbafter I arrived from my 14 hour trek.

So we gonna get some street action in today vefore we head back to NY.

[E36Mylo]

Car's looking BADASS man!