OLD
E30
636whp
1/4 mile: 10.91@144.38
http://www.youtube.com/watch?v=L_f7fUVqblI
NEW BUILD
335d
520whp
635wtq
120.51mph trap speed
OLD
E30
636whp
1/4 mile: 10.91@144.38
http://www.youtube.com/watch?v=L_f7fUVqblI
NEW BUILD
335d
520whp
635wtq
120.51mph trap speed
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
shoot me an email sales@maximumpsi.com , we can take you to the moon!!
OLD
E30
636whp
1/4 mile: 10.91@144.38
http://www.youtube.com/watch?v=L_f7fUVqblI
NEW BUILD
335d
520whp
635wtq
120.51mph trap speed
I had to move the carpet over next to the car while I was working on it because the fawn dog wanted to watch. Not long after, I turn around and there are two dogs.
Last edited by bubela; 04-19-2016 at 06:03 PM.
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
1997 Cosmos E36 M3/4/5 Boost Logic GT40/94r .85 Technique Tuning
Stock motor
1998 Estoril E36 M3/4/c4 Steed Speed2 Gt40/94r 1.06 Technique Tuning,
Built motor, Best ET ( 9.63 @ 142.61 mph MS100+meth ) 10/08/21
Best mph ( 10.08 @ 144.66mph MS100+meth ) 9/18/19
build thread:
http://www.bimmerforums.com/forum/showthread.php?2269817-Habbit-continued-Turbo-build-V
OLD
E30
636whp
1/4 mile: 10.91@144.38
http://www.youtube.com/watch?v=L_f7fUVqblI
NEW BUILD
335d
520whp
635wtq
120.51mph trap speed
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Bump!!
Not much to report. I literally moved to work, so I don't commute anymore. That said, I still have a couple thousand miles on this car since picking it up from Maximum PSI. Took it to the park the other day with the dogs in tow. I try to keep the paint clean, but the dogs keep the back seat a bit dirty. I run errands, bank, food shopping, home supply store, etc. I pretty much always go across the bridge when I leave so I reach 4th gear with my foot still in. Haven't been back to Atco since getting an alignment and new tires. Maybe soon. Also, my home supply of e71 is getting low. I heard that e86 is coming out of the tap now-a-days. =) Look forward to seeing how the car adapts to the "high test".
27671957885_ed36e2237a_b.jpg
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
Love this E46 M3. I need one in my life.
98 Fern Green M3/2 - Precision 6870/AR Designs Twin Scroll/RK/E85
2017 Toyota Tundra Crewmaxx - Family Whip
2011 Pierce 75' Quint - Fire Apparatus West Islip FD
Got a fresh batch and mixing with the old, in-tank. Figure I'd let the ECU adjust a little before e85 is in use. Plan is to see how it performs in the 1/4 at Bimmerfest a couple weeks from now.
20160716_154321.jpg
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
The clutch I bought the car with does not seem to release at high RPM as quickly as I would like. So, I went with this unit from Maximum PSI. I've heard good things.
20160726_205212.jpg
I conjured my inner-Perry, but I'm calling it a day. Should be able to test drive tomorrow night.
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
You're sure it isn't a hydraulic issue? I was having high epm disengagement issues and it was my slave /worn rubber clutch line.
What is the weight of that clutch/flywheel combo?
Sent from my GTX3582R
'97 M3, Estoril blue, 2 dr, euro 6-spd, EFR 9180 divided T4 .92 IWG, RK tuning, CP 8.5:1 pistons, Eagle rods, Schrick cams, L19 11 mm ARP studs, O-ringed block, Supertech stainless/inconel valves, Supertech springs & Ti retainers, ported head, S54 oil pump/pan, 80 lb. injectors, OBD1 intake manifold, Steedspeed twin scroll T4, 3.5" SS exhaust, eBoost2 EBC, HFS-4 W/M injection, AEM Failsafe, Zeitronix data logger, Racelogic TC, OpenOBC w. ethanol %, Ireland Eng. engine mounts, UUC black tranny mounts w. enforcers, UUC twin disc feramic, ARC-8's, MCS 2-ways, Z3 rack, Rallyroad strut bar, X brace, Eibach sway bars, Ground Control LCAB bushings, Bimmerworld RTAB's, Powerflex subframe bushings, 210 4-clutch LSD, Stoptech BBK, titainium shims, steel braided lines, brake cooling ducts.
Yup, pretty sure it's not a hydraulic issue. Everything looks solid on the car. We'll find out soon. Finished up earlier today but it's raining. Not a fan of driving this car in the rain.
The clutch/flywheel combo is indeed quite heavy. I wanted to weigh it, but forgot to. I even already re-used the box if shipped in (I could have grabbed the weight off the shipping label). I'm guessing it's in the 40 pound range.
Once thing that's noticeable so far is the resistance on the clutch pedal. I'm sure everything will like the decreased load. (including my knee!)
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
Installed the new clutch and broke it in on the way to Bimmerfest. I like it better than the outgoing single disc clutch. Also, no more release issues. Held tight and shifted smooth.
As often the case with me, my first run of the day was my best. Not to say I have any good slips to show for it. The track didn't seem prepped well, and spun a lot, but still had fun trying!
28043732453_9a2b4a5ab7_b.jpg
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
I got my old 17" 275 MT drag radial to fit the e46 m3.
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
Sure thing. It's for sale. $14k
29112255195_7ac7654f6c_b.jpg
29079529676_597853cfdb_b.jpg
95 turbo 330ti. 01 maxpsi m3 e85. 01 m5. 01 m coupe. 03 AIM 996t e85. 06 x3 w/Meyers plow and winter daily. Prussian Motors is hiring!! prussianmotors.com/jobs
Current e39t LS Turbo swap: https://www.bimmerforums.com/forum/s...LS-e39-Touring
Bookmarks