It's been a long time coming but the engine build and first dyno session is finally done. As a result, I will be selling off parts that were not used and most of which are brand new. I'm only posting here in advance since this section of the forum is specific to the euro engines.
The engine is fully built with all forged internals, BMW Motorsport GTR crank, BMW Motorsport cams, headers and harmonic balancer. Everything is new even down to the oil pump, water pump etc.... Fully functional vanos, 11.5 to 1 compression and 93 pump gas. This is a "street" engine and going into a street car. The project is way more than the engine but I can't get into all the details. When all is said and done I'm sure you will hear about it.
I can't give exact numbers on the engine but suffice it to say it easily exceeds the power of an S62. This is a collaboration between Scottsdale Motorsports and Fletcher Made Horsepower (Chris Fletcher). If you don't know who Chris Fletcher is just think one of the PTG master engine builders. Engine tuning was done by Franz Diebold - one of the best tuners in the country!
There are other parts that I'll be selling besides the one's pictured below such as a brand new standalone DTA S100 plus all the extras that come with it.
Carbon intake street/track
SS headers S50B32
Goeke Carbon intake - track/high performance street with optional intake size
Schrick 284 cams
Wiseco forged piston kit
Obligatory content
Last edited by Jim E.; 02-05-2016 at 11:53 PM.
The dyno sound nice! Too short, but nice.
So if not 284s, which cams will you be using?
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
Hi, you are selling these parts? If yes send me price please for the carbon airbox and the 284 schricks.
S50B32 341Bhp@7800Rpm, CDA SP03, Supersprint manifold+decat+Rear race exhaust, BMW Performance Brembo 6/2pot brake with E46 M3 CSL discs, KW V3, H&R sways, Motorsport strut bars, fully powerflexed, GT2 optic, 19" BBS RS-GT wheels with Michelin PSS.
I will take the Goeke Carbon intake, Hi-cams and forged pistons. They fit the Euro S50B32 engine right?
Please send me price for shipping to 92870 (Orange County, 92870)
Seriously sexy! I'd love to shop the BMW motorsport catalog!
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
Yes I do. Just PM me.
How much power did it make @8100 rpm?
Bump!
How's the car running? Still have the Goke intake?
Car ran great. Thanks for asking. Almost forgot about this thread. Yes I do have the Goke intake. Funny you posted because I'm finally getting around to posting for sale all the items I didn't use or will not be using - including the Goke intake.
This was only phase 1 so there's a lot more that's going to happen.
I ended up using this intake in case you were wondering.
- - - Updated - - -
Totally missed this post. Better late than never I guess.
424 on engine dyno without cats.
Nice idle. LOL
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
sounds really good. what MS cams? care to post a graph from the dyno?
Last edited by digger; 05-28-2017 at 06:34 AM.
We need to see on-road vids of this car.
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
I'm being patient.
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
I'm not!
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
Thanks for the response, I'm in the market for a new carbon intake. Is the one you ended up using a real CSL intake (sorry, I cannot really tell).
Also, what ECU are you using? My MSS50 is not accepting any more re-flashes and the alpha-n runs pretty grumpy with schrick 284 cams and 6,500 feet of elevation. I'm sure I could find a used ECU and have it tuned to run pretty well, but a standalone is something I'm heavily considering.
Bookmarks