- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
No one has put any money down on the top, it's still up for sale. The headliner has a few bubbling spots but nothing horrible. All the brackets are pulled and ready to go. Some people are headed down Tuesday to look at it but declined to put a deposit down. Tom bought just the mirrors.
- - - Updated - - -
Pulled today:
M roady door sills
M hood gills
Full interior minus the dash and a pillar stuff and visors.
Driver rear fender
Sub and box
Leather door pulls
Chrome door handles
Hardtop mounting bits
Roll hoops and all associated parts
Alarm
Added to the OP listing: Driver rear fender, Z3 Alarm, Soft top price
- - - Updated - - -
Items sold today:
Cluster
Pass Sliding Glass
Headlights
Photos from today:
Last edited by robb1887; 02-22-2016 at 07:42 AM.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
How much for the alarm to 14303. Does it have 1 or 2 remotes and does it come with the siren in under the hood. I would assume this is universal even for a 96 1.9 that is pre-wired for alarm.
Alarm already sold, sorry
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Ok thanks
just an FIY, the rear shock mounts are Rogue and all the shocks should be Koni Yellows (unless they were changed after my ownership). Breaks my heart to see it like that all torn up.
Thanks!
RSM's looked like Rogues, but didn't check them that hard.
Fronts are destroyed and the rears may be koni yellows, but I didn't stare too hard yet at them.
Just know it will go living on through others. Myself included. Stereo and some other parts are headed into my Coupe for sure.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
sorry for your loss. would u consider selling your softtop headlining? part 54318410992
I bought it after the wreck. I'm trying to sell the top complete, if there's no interest I'll be in touch.
- - - Updated - - -
I can't seem to find who contacted me about the steering rack, but I had my head under there today and it looks to be good. No visible damage to the rack. The tie rods are shot on both sides and would need replacing.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Hey Robb,
Would you mind adding some photos of Autodim mirror if it is still available?
Thank you.
Last edited by nevan; 02-15-2016 at 11:05 PM.
2000 Z3 M Titanium Silver / Imola Red+Black Nappa
2011 328i E92 Space Gray Metallic / Leder Dakota+Oyster
Since 1987 12 euros / 2 kdms / 2 jdms
- Zach
Sure, I'll grab one today and get it up.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Pulled the mid-pipe last night and decided I'm sticking to my original plans for my exhaust for a single 3". The Racelands and catless midpipe will be FS with V-bands.
So it would have:
S52/M52 Racelands
2x 2.5" Vbands front
Catless dual 2.5" midpipe with resonators and H-pipe
2x 2.5" Vbands rear with stubs from axel back.
All you would need to complete this for an Z3M is a pair of mufflers and some quick pipe fit up from the mufflers to the V-banded stubs
Pricing added to the OP
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Robb,
1. How are the front fender liners?
2. The trim pieces below the dash that slip behind the wings of the center console - are the tabs with the speednuts still intact? I guess on the passenger's side that's actually part of the glovebox assembly?
3. Is there a passenger's side Airbag tab?
4. I'm strongly considering the front brake assemblies. That's lines, knuckles (spindles), hubs, rotors, pads, calipers and carriers? Anti-rattle springs too? Do the hubs have studs, or did they use wheel bolts (looks like bolts)?
Is that HU a DEH-80PRS?
Last edited by BMWBergy; 02-10-2016 at 01:42 PM.
DIY/Project Links:_TC Kline D/A & Suspension Refresh_|_Oil/Engine Cooling Options / Install_|_
Dinan/Fikse FM-5 Build_|_Stereo Install_|_HID Retrofit_|_
The rear shocks looked Bilstein to me. Also, no top headliner in this car. Those didn't start until ~6/99, this one is 11/98.
/.randy
Just for my own curiosity, can we get a shot of the driver's side rear fender from underneath? It sounds like they filled the antennae hole, I'm curious how it was done (weld vs. filler). Potentially interested for a future project.
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
Negative. OEM panel with no hole. Randy and I took it off just to satisfy is curiosity.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Shifter info added to OP. Can be used in all non-M's for a shorter throw with a small bend added to clear the guibo going into reverse from what I've read.
Engine was removed last night along with Bergy's transmission.
I took the photos of the mirror but forgot to upload them the other day so they are still coming.
Next up is Front Suspension/brakes removal and then the rear end gets pulled out.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Sold this weekend.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
I need the glovebox handle.
PM'd you.
PM me an offer for it to get it disassembled and shipped.
OP was updated this morning:
Updated the exhaust to be a whole setup. I'd like for this to go with the SC since the tune is with this setup but am not hard set on this if the SC buyer has a high flow exhaust already, or doesn't want it.
Added steering rack
Added security lug bolt set
Added front strut reinforcement plates
Added S52 wiring harness
Confirmed the rear shocks are Koni Yellows and are removed
Coming soon:
Rear rim pair (washing them this weekend)
Front rim single
Set of tires (likely going on CL local 225/245 Potenza's IIRC)
Z3M tophats after checking to make sure they are good for reuse
Front struts are Koni drop ins that I'll see about getting out for resale as well, but the strut housings are trash.
Rear springs removed, fronts to be dismounted this weekend
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
I might take the mirror as I don't like the look of the non-autodim that came out of my parts car. What parts are it missing? Just the cover for the wiring on the mounting arm? Glass/fluid intact?
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
Winterbaby just beat you to it, unless you work it out with him to not buy it, he just paid me 2 minutes ago.
Just the cover is missing and glass/fluid seems fine but I didn't test it.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Bookmarks