Prices are OBO +shipping +3%paypal fee. Unless otherwise stated.
Cash is king, that said you are welcome to put non-refundable deposits on items you know want that we can negotiate how much and for how long. I will communicate with everyone as quickly as I can but first to put money down is the first to get the part.
I will not hold dibs or items without a deposit.
THE SHELL IS GONE, ALL I HAVE IS WHAT IS LISTED.
I will ship what I can, and can maybe arrange freight if needed, but larger items I may request you arrange your freight details.
VIN: LC88819
Milage: 120750 ish
Location: 23321
ALL PRICES are OBO
The known bads:
Front bumper
Pass front rim
Driver glass
Setrab oil cooler
Core support
Frame rails
Side skirts
Driver strut
Shifter surround plastic panel
No clock
The goods:
Engine:
SCRAPED Z3M driver engine mount arm with PS res and bracket
SOLD Full Exhaust including:
· S52/M52 Racelands
· 2x 2.5" Vbands front
· Catless dual 2.5" midpipe with resonators and H-pipe
· 2x 2.5" Vbands rear
· 2x Vibrant dual tip mufflers (1040's maybe?)
SOLD S52 Z3M wiring harness, missing end of MAF wiring due to SC harness
SOLD VF supercharger V3 kit including:
· Nick G tune (running 6psi currently, tune good to 8psi)
· VF injectors
· spark plugs
· boost gauge
SOLD S52 long block w/ stock internals, including
· New valve cover gasket at 108K miles
· Coil packs at 108k
· New oem cam/crank sensors at 108K miles
· Bimmerworld low temp Tstat
· Metal impeller water pump w/ new o-ring
· Brand new Oil filter housing to block gasket
· Includes PS pump and AC compressor
· No ECU/harness/manifolds
Drivetrain:
$500 Z3M rear axles
SOLD 3.73 Diff w/ dual ear cover
SOLD MZ3 shifter lever
SOLD M rear end, including:
· IE subframe bushings
· Subframe
· Rear trailing arms
· New rear trailing arm bushings (oem) at 104k
SOLD trans mounts (SHIPPED)
SOLD ZF trans, including:
· New OEM clutch replaced at 104K miles
· New OEM dual mass flywheel at 104K miles
· shift pin service
· braided steel clutch line & slave
Suspension:
SOLD Front strut reinforcement plates (pair)
SOLD Z3M tophats
SOLD Koni yellow front inserts
SOLD Koni yellow rear shocks with Rogue RSMs
SOLD Z3M steering rack
SOLD H&R street springs
Wheels/Tires:
$20 Chrome "Security" lug bolts
$(Make offer) OEM lug bolts
SOLD Rear roadstars
SOLD Front single roadstar
SOLD Set of Bridgestone TE760 (225/45 245/40)
Exterior:
SCRAPED Mroady trunk PRICE DROPPED 7/27
SCRAPED Driver rear fender, slight damage (NO ANTENNA HOLE, which is weird but is OEM, no previous hole filled) PRICE DROPPED 7/27
SCRAPED Set of metal heat shields (trans tunnel minor damage, missing one fastener from driver rear shield) PRICE DROPPED 7/27
SCRAPED Hood (Nose dented, wind knocked it over on my trailer and has two dents in top) PRICE DROPPED 7/27
SCRAPED pass front "fender" PRICE DROPPED 7/27
SCRAPED gutted driver door skin (no handle, window parts, or latch) PRICE DROPPED 7/27
SCRAPED Clean washer tank cap SHIPPED
SCRAPED Lower door weather strips Ea ($55 pair) (I just bought a new one for $45+shipping a month or so ago!)
SCRAPED Heated washer nozzles (pair) SHIPPED
SOLD driver front "fender"
SOLD M gills
SOLD Soft top assembly
SOLD Hardtop with hardware
SOLD M mirrors
SOLD eBay headlights
SOLD driver taillight
SOLD 3rd brake light
SOLD Passenger sliding glass
SOLD Passenger door skin
SOLD Fender lights
SOLD Trunk seal
Brakes:
SOLD Complete M front brakes with knuckles, pads, calipers, SS lines, mounts & discs
SOLD Complete M rear brakes with pads, calipers, SS lines, mounts & discs
$75 Z3M master cylinder & booster PRICE DROPPED 7/27
Interior:
$27 Glovebox anti-sag fix "kit" (SHIPPED)
$75 -99 hardtop defroster connectors w/ pigtials (chassis side only!) for pre-power top owners that want to have a function hardtop
SOLD -99 rear defroster switch
SOLD HK amp
SOLD NRG short hub adapter
SOLD Column switches
SOLD Passenger airbag cover
SOLD Roady fitted box with Alpine 10" SWR sub
SOLD Roll hoops w/hardware & trim
SOLD Autodim mirror
SOLD Mroady door sills
SOLD Mroady cluster
SOLD Mroady seats (broken belt keepers, w/ bushings done)
SOLD M center console, including:
· shifter chrome ring & "fasteners" with shift boot
· volt meter & oil temp guage
· HVAC controls
· All switches, as is
· e-brake boot & handle
SOLD ZHP shift knob (5sp)
SOLD chrome door handles (pair)
SOLD Driver door airbag tab
SOLD Driver air vent w/headlight pull
SOLD Z3 specific OEM alarm (complete with brain, one remote, Siren with plug, Light and Microphone that mounts behind the armrest, can provide the panel if required)
SOLD SRS computer (under center console)
SOLD Soft top hydraulic system
SOLD M Pedals
SOLD Glove box
Photos provided on request
Last edited by robb1887; 09-22-2022 at 11:58 AM.
If you can be persuaded to part with the Mason clutch pedal, I'm your buyer.
Sent from my iPhone using BF.com
___________________________________
Always looking for my next ///M Coupé...
What size is the sub 10? What are you looking to get for the sub box in the trunk?
im interesred with the Shift knob, center console, cluster, hardtop mounts
Interested in both seats. Would love photos and quote to freight them. PM me when you're ready.
Is there no way of fixing it without parting it out? Is there a lot of frame damage?
Steffen Sparks
Highly doubt it, but you'd be second in line already. Ha
Looked like a 10 but I didn't measure it, I will price it out today and list it. Box looks to be a combo of MDF and fiberglass from just looking at it, but I'd have to dismount the sub to be sure. No clue on how it mounts yet.
Mounts are staying with the hardtop unless I have a buyer that does not need them.
Shoot me a PM with your shipping address and I will price and get a shipping quote for the rest of the parts you are asking about. Did you want everything included in the console (armrest, gauges, AC controls, shift boots, shifter trim)? The boost gauge, defrost button, bass knob and alarm light/mic are staying with their respective part "kits", but the rest of the switches are up for grabs, I may have the parts to repair the AC/recirc switch to get it complete, but have to check.
Never had any experience with this and recently heard grey hound will not cover any damages to car parts that are freighted, do you have a carrier you prefer?
Right front frame rail is almost completely severed off the car, I hoped for a possible repair, but unless its a fresh shell I wouldn't trust it.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Interested in your side mirrors if they are still available. Thanks!
I'm very interested in the Trans. Please.
Also, how do the front brake calipers look?
Last edited by BMWBergy; 02-03-2016 at 08:52 AM.
DIY/Project Links:_TC Kline D/A & Suspension Refresh_|_Oil/Engine Cooling Options / Install_|_
Dinan/Fikse FM-5 Build_|_Stereo Install_|_HID Retrofit_|_
Virginia? Connecticut here, but interested in the hardtop and install hardware. How is the condition? Price? If we can work something out, I'd drive down and get it.
1999 BMW M Coupe
2002 BMW M Roadster
They are, working on getting them priced now
Collin is talking about the trans as well, I PM'd you on Face book. Price is listed.
Quick glance looks like the front brakes are good. Would be sold as knuckle, rotor, caliper, pads, and SS lines "kit"
Hardtop looks to be good to great condition. Not 100% sure on fasteners, but the mounting brackets are there and the plastic covers. Would include the wiring and defrost switch as well. No sign of the "install tool" but the tool kit and fasters are common on FleaBay for <$50. Pricing was updated in OP
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
I know you are keeping the exhaust, but what is it?
WTB: Z3 M Coupe - G-Power front splitters, driver's side door panel
WTB: E36 M3 Coupe - CF Roof plug, LTW Spoiler
DIY/Project Links:_TC Kline D/A & Suspension Refresh_|_Oil/Engine Cooling Options / Install_|_
Dinan/Fikse FM-5 Build_|_Stereo Install_|_HID Retrofit_|_
Ah, my twin. Guess I will come over and vulture sometime soon. Put me down as a possible on the headlights for Di's coupe, if they are the black ones.
/.randy
Racelands to catless 2.5 mid pipe with cross connect, some resonators, to 2.5" v-banded Vibrant cans. I'll likely throw in some cats and bungs to make it pass inspection and rock it. I may have a set of Raceland headers and 3" y-pipe collector FS soon if I go this route, from Mindy when she was supercharged so long ago.
Collin wants to pay Friday.
I'll be home all week. Adam is likely coming this weekend to get the motor if the weather holds. Headlights are the black ones as you can see in the photos, I believe all the tabs are still in tact
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Sent you a PM.
Items are selling:
Side mirrors
Driver door airbag tab
Driver vent w/headlight pull
All SOLD
- - - Updated - - -
Updated pricing on door pulls and headlights for reasons noted. Photos to follow soon.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Where was the sub box purchased new?
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Probably custom. I'm going to have to pass on the sub box. Thanks anyway Rob
sad pics... amazing it can't be brought back from the dead....
at any rate, any thoughts on the aluminum heat shields underneath? condition?? asking price?? (an if unavailable, any ideas on where to acquire some)
and also, in the first photo, the brackets under the drivers side that hold/capture all the lines and wires running fore and aft, there are two...
Interested in them.
I'm local and need a cluster. I can pick up on Saturday morning if it's not claimed already.
You said something about needing some other stuff and were going to get up with me, we could probably work something out
Passenger "trumpet" frame rail is almost completely ripped off, and past my skills, but I can make a good dime on the parts so that's the way we are going. Mroady's are too common to try and repair something this bad that may have more hidden.
All are there as far as I know, and are definitely for sale. I'll get them removed this weekend hopefully, priced and get up with you. Brackets shouldn't be an issue either.
No one yet, but it's first come first served. I can have it pulled by then if this rain stops long enough.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
my zip is 06851
Bookmarks