328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
Never going to pop my hood next to you LOL
More info on this Volvo Rad that flows like a DEAMON? Size? What is it off of? How many amps does it pull?
Attention TURBO LOVERS, Great book -----> How to turbocharge and Tune your Engine
Favorite Automotive Tuning Articles on the Internet: Engine Tuning Articles
My Car: Custom Build Lotus Super 7
I'm a little fuzzy on the details, but they are found in early 90s 940 volvos and later 90s Ford Taurus. The Volvo is a little slimmer then the Taurus but same motor and fan. I know it takes more then 30 amps, and I've heard it flows around 4500 cfm.
like I said, I'm a little fuzzy on the details. I've heard these fans are sick and friend had one hanging around so it was free to me. A quick Google search will get you some good info.
they are about 18-20 inches around and 4 inches deep
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
If you're talking about the rad fan I believe it pulls around 2500cfm at the low setting and around 4-5500cfm on high. From what I remember they pull around 60amps! It's a dirt cheap fan and super effective.
edit; used to have one on my m52 e30, and that thing wouldn't hesitate keeping the car cool in the 120* Phoenix heat in rush hour traffic!
Last edited by e46cruiser; 02-17-2016 at 06:54 PM.
| BAGGEDE46 |
Yup, haha I picked mine up for 15 dollars at the yard. I wasnt aware the Volvo's used the same one, I knew they came in Taurus' and the lincolns for sure but never the Volvo's. Anyways I recommend it to anyone that is looking into a super cheap, super effective electric fan!
| BAGGEDE46 |
You will regret doing this twin turbo LS project. It looks cool but it is not practical and question is will it work as a long term. Just imagine how much heat will be under that hood, all the plastic parts will be cooking.
Downpipes will be a major hack job. You will hate it and regret it. Someone has to say it.
Last edited by hakentt; 02-18-2016 at 09:01 PM.
Dude your a joke. Your projects are a joke. Your basically doing what we all did when we were in high school.
but I'll keep you posted on the results.i have high confidence that my set up will work fine.
as for the down pipes, do you even fab? Or do yu just bolt in swaps and "tune" cars based off other people's work?
you don't have to answer, we all know the truth.
youll have a much better life when you drop this self entitled bullshit. I'd hate to have to deal with someone like you on a daily basis.
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
That auto 335 swapped e36 video looked like Turbo the snail before he ingested N2O
Why am I a joke? I haven't even started my project yet. How do you know what I will do?
You had the same confidence with NOX and your blew the piston. You had the same confidence with drag tires and you blew the diff.but I'll keep you posted on the results.i have high confidence that my set up will work fine.
Why did you post your thread? For people to give you their opinions. I am giving you mine and is totally reasonable.youll have a much better life when you drop this self entitled bullshit. I'd hate to have to deal with someone like you on a daily basis.
1. Your a joke because you have this self entitled attitude that is completely un warranted. I have yet to see you do anything even worth mentioning, but yet you talk like everyone else is doing it wrong.
2. I never blew a motor on the spray. It's actually the same motor that's now turbo. It did very very well on the spray. Made 390/390 on the motor with a 250 shot on pump gas. I'd say that's a win. The motor I blew was on start up from a faulty pressure regulator on a brand new oil pump.
3. Your opinion offers no constructive criticizism. Your literally telling my project is a fail, which is funny, because again, you don't have enough expeiercne to say such things.
And further more, you posted a stock pwm fan that's completely controlled by the swap that you bolted in your car. That's not impressive, that's bolting shit together, and I'm not even sure what you are trying to show.
- - - Updated - - -
And on another note, I hurt the diff with wheel hop on stock tires. When I put the Hoosiers on, I never had a problem again.
And honestly, if your cars not breaking shit, it's probably not fast.
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
www.facebook.com/Undr8dEmpireLlc Instagram: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti - http://www.bimmerforums.com/forum/sh...(-Project333Ti)
www.facebook.com/Undr8dEmpireLlc Instagram: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti - http://www.bimmerforums.com/forum/sh...(-Project333Ti)
Bleed your cooling system http://forums.bimmerforums.com/forum....php?t=1709482The ULTIMATE OEM Alarm/Keyless thread http://forums.bimmerforums.com/forum....php?t=1792200
Fuckin dope project. Get her lookin right n tight!
Thanks brotha. Its official, we are re-doing the downpipes. They didnt come out on the same level as the rest of the car.
Im thinking of bringing them down like they are now, bring the passenger side over to the drivers side and merge them to a single 4 inch and have come out the actual side of the bumper rather then underneath it.
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
Bookmarks