Page 2 of 40 FirstFirst 12345678910111227 ... LastLast
Results 26 to 50 of 976

Thread: Dburt's Rusty Nitrous LS M3 Build, now twin turbo

  1. #26
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  2. #27
    Join Date
    Nov 2009
    Location
    Long Island, NY
    Posts
    5,373
    My Cars
    67mm 325i, RAM 1500
    placement looks tight, downpipes gonna be a little issue.

  3. #28
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    The down pipes should be no problem, because they are going straight to the ground lol.


    but I'm thinking I wanna turn the turbos around so they face inwards so I can run air filters, and maybe send the exhaust out the fenders for the #becauseracecar

    but im trying to design the kit so I can bolt it into my other car and not cut it all apart, so that would only work for this piece of crap
    Last edited by e24mpwr; 03-19-2016 at 09:52 PM. Reason: profanity
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  4. #29
    Join Date
    Nov 2009
    Location
    Long Island, NY
    Posts
    5,373
    My Cars
    67mm 325i, RAM 1500
    Oh I thought you were trying to at least have a single 4 or 5 inch exhaust under the car lol, not the honda game hood exit or fender exit.

  5. #30
    Join Date
    Oct 2006
    Location
    Chicopee, MA usa
    Posts
    2,872
    My Cars
    1998 M3 TURBO
    Holy crap. This thing is gonna be for real. Even if not BMW power like it should be
    ICS Stage 1 NickG tune, 60lb Injectors, Blow through MAF, Synapse BOV, Boostlogic Manifold, BW-S366, Full 4" exhaust, Built Block w/ Wiseco's and K1 Rods = Good Times

  6. #31
    Join Date
    Jun 2012
    Location
    South fla
    Posts
    1,103
    My Cars
    97 332i, 90 535i
    Sub'd

  7. #32
    Join Date
    Nov 2004
    Location
    San Antonio
    Posts
    6,031
    My Cars
    Z3M Coupe & Roadster
    Wow. Can't wait to see a finished engine bay pic

  8. #33
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Quote Originally Posted by E36 HateR View Post
    Oh I thought you were trying to at least have a single 4 or 5 inch exhaust under the car lol, not the honda game hood exit or fender exit.
    Mite not out of the question. Biggest problem is the drivers side has a stupid steering shaft right in the way. If I can get creative and get a decent sized pipe through there, the rest should be pretty easy.

    but for right now, they are just gonna dump.
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  9. #34
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Made some progress on the hot side tonight. Had to rethink the merge to the t4 flanges and am going to have some new ones made hopefully tomorrow. Next challenge is going to be the wastegate placement and radiator.
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  10. #35
    Join Date
    May 2014
    Location
    Noblesville, IN
    Posts
    1,760
    My Cars
    98 328i, 79 911SC
    that escalated quickly.
    always trying to make it lighter and faster

    ^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
    current build: http://forums.pelicanparts.com/porsc...car-build.html
    instant grams: doktor_b

  11. #36
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Gt the charge piping basically all sorted today. Most of it is completely welded. The throttle body piping is just tacked right now until I get the right couplers. The intercooler will be getting 60degree couplers but have 90s stretched for the pic
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  12. #37
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Minimal progress with work and school. Basically bought everything else I need to finish the car. Got a really nice rad that is going to work well.
    3 inch thick core


    also got the wastegates and bov (vs racing, tial knock offs)


    had these custom t4 flanges. We were having a hell of a time getting schedule 10 2inch to old nice with a square hole, so a buddy stopped by and whipped these up at work for me. The threaded holes in the side are for bracing. I'm pretty happy with these







    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  13. #38
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3


    - - - Updated - - -





    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  14. #39
    Join Date
    May 2015
    Location
    Atlanta, GA
    Posts
    3,608
    My Cars
    540i6 S2M5 M2C 135 S52ti
    That plumbing is genius good job well
    Done and so on... Build me a car like that... You can use the motor from my Chevy suburban...

  15. #40
    Join Date
    Sep 2008
    Location
    Toronto, ON
    Posts
    2,676
    My Cars
    6465 328ti
    Play-by-play boost updates. Me likey

  16. #41
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Quote Originally Posted by angeleye540i View Post
    That plumbing is genius good job well
    Done and so on... Build me a car like that... You can use the motor from my Chevy suburban...
    Haha, thanks. I cant wait until its done.

    Stupid school is really hindering my progress, but the other side was a fail. We had it all tacked up, turbo hung, everything looking great and we went to do the last weld (stainless to the manifold) and it wasnt having it. It would just blow the manifold apart like it had major contaminants.

    So im hopefully picking up another mani tonight and we will try again. Sucks because we prolly would have had the gates pretty far along.

    Also, i ordered another BOV. My friends convinced me because you will see them both through the grills. I agree it will look sick!!
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  17. #42
    Join Date
    Nov 2013
    Location
    VA
    Posts
    1,156
    My Cars
    E36
    Not a huge fan of ameriswaps, but damn this thing is going to be a monster! Subscribed.

  18. #43
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Quote Originally Posted by bmw328m52 View Post
    Not a huge fan of ameriswaps, but damn this thing is going to be a monster! Subscribed.

    Ive been getting alot of that, but its ok. I like going against the grain, lol.
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  19. #44
    Join Date
    Nov 2013
    Location
    VA
    Posts
    1,156
    My Cars
    E36
    I should have said "usually not a fan." I approve of this swap 110% but GL with the build
    Last edited by bmw328m52; 02-01-2016 at 03:17 PM.

  20. #45
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Got a new manifold and finished up the other hot side. Also got my Volvo fan mounted. Coming along nicely






    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  21. #46
    Join Date
    May 2014
    Location
    Noblesville, IN
    Posts
    1,760
    My Cars
    98 328i, 79 911SC
    so rad.
    (making me feel like a bit of a bum for not getting on my project.)
    always trying to make it lighter and faster

    ^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
    current build: http://forums.pelicanparts.com/porsc...car-build.html
    instant grams: doktor_b

  22. #47
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  23. #48
    Join Date
    Nov 2013
    Location
    VA
    Posts
    1,156
    My Cars
    E36
    Need. Vidz. Now.

  24. #49
    Join Date
    Aug 2012
    Location
    CT
    Posts
    3,880
    My Cars
    Twin turbo LS E36 M3
    Quote Originally Posted by bmw328m52 View Post
    Need. Vidz. Now.
    All I got is pics tonight.

    got the cooling setup squared away. Thought i was going to have to make a shroud but I don't, lol. Using the infamous Volvo fan, rumored to be around 4500 cfm.













    328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
    9.20 at 150 on 22psi

  25. #50
    Join Date
    Oct 2010
    Location
    Huntsville, AL
    Posts
    1,904
    My Cars
    95 M3
    What are the specs on the turbos?
    WOT

Page 2 of 40 FirstFirst 12345678910111227 ... LastLast

Similar Threads

  1. Full Build Thread - Twin Turbo e30 m3
    By SierraNevada40 in forum Forced Induction
    Replies: 43
    Last Post: 01-23-2017, 05:44 AM
  2. E36 M3 1JZ-GTE Twin Turbo Build! Purists Beware
    By Reilly1JZ in forum Engine Conversions
    Replies: 7
    Last Post: 07-05-2015, 12:12 PM
  3. Local E46 SMG M3 Build - Maximum PSI Turbo Kit
    By maximumpsi in forum Forced Induction
    Replies: 26
    Last Post: 02-19-2013, 07:14 PM
  4. E36 M3 vs E46 M3 vs Supra Twin Turbo
    By HyperHoHo in forum Kill Stories
    Replies: 42
    Last Post: 06-12-2004, 10:20 PM
  5. E46 M3 vs. RX7 Twin Turbo
    By JMWeb in forum Kill Stories
    Replies: 26
    Last Post: 04-18-2003, 03:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •