placement looks tight, downpipes gonna be a little issue.
The down pipes should be no problem, because they are going straight to the ground lol.
but I'm thinking I wanna turn the turbos around so they face inwards so I can run air filters, and maybe send the exhaust out the fenders for the #becauseracecar
but im trying to design the kit so I can bolt it into my other car and not cut it all apart, so that would only work for this piece of crap
Last edited by e24mpwr; 03-19-2016 at 09:52 PM. Reason: profanity
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
Oh I thought you were trying to at least have a single 4 or 5 inch exhaust under the car lol, not the honda game hood exit or fender exit.
Holy crap. This thing is gonna be for real. Even if not BMW power like it should be
ICS Stage 1 NickG tune, 60lb Injectors, Blow through MAF, Synapse BOV, Boostlogic Manifold, BW-S366, Full 4" exhaust, Built Block w/ Wiseco's and K1 Rods = Good Times
Sub'd
Wow. Can't wait to see a finished engine bay pic
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
that escalated quickly.
always trying to make it lighter and faster
^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
current build: http://forums.pelicanparts.com/porsc...car-build.html
instant grams: doktor_b
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
Minimal progress with work and school. Basically bought everything else I need to finish the car. Got a really nice rad that is going to work well.
3 inch thick core
also got the wastegates and bov (vs racing, tial knock offs)
had these custom t4 flanges. We were having a hell of a time getting schedule 10 2inch to old nice with a square hole, so a buddy stopped by and whipped these up at work for me. The threaded holes in the side are for bracing. I'm pretty happy with these
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
That plumbing is genius good job well
Done and so on... Build me a car like that... You can use the motor from my Chevy suburban...
Play-by-play boost updates. Me likey
Haha, thanks. I cant wait until its done.
Stupid school is really hindering my progress, but the other side was a fail. We had it all tacked up, turbo hung, everything looking great and we went to do the last weld (stainless to the manifold) and it wasnt having it. It would just blow the manifold apart like it had major contaminants.
So im hopefully picking up another mani tonight and we will try again. Sucks because we prolly would have had the gates pretty far along.
Also, i ordered another BOV. My friends convinced me because you will see them both through the grills. I agree it will look sick!!
328i Sedan Twin s366's, 6.0LS, TH400, MS3 Ultimate
9.20 at 150 on 22psi
so rad.
(making me feel like a bit of a bum for not getting on my project.)
always trying to make it lighter and faster
^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
current build: http://forums.pelicanparts.com/porsc...car-build.html
instant grams: doktor_b
What are the specs on the turbos?
WOT
Bookmarks