Greetings,
I need your help to find the 2jz Mount Swap Kit for bmw E34 , M5 It was listed in Ebay but unfortunately not available now and I have sent messages to the seller but not response. Is there Anyone can help me to find this engine mount.
Thanks
I am looking for the same thing at this point in time Jaroodmi. I also have sent numerous messages to them with no response. I sent a few messages to some other manufacturers / fabrication shops with no real success.
So I am with you...if u find anything let me know...only thing is I own a RHD e34.
Ok. u 2
I own E34, M5
Go onto Facebook and join this group:- 1/2jz powered bmw's. There's tons of support there. There is also this guy there called Steve reinkens: he has an e34 with a 1jz...tons of help from him (I believe he's on here as well.
There are also some machine shop dudes there. I asked a guy from one of the shops if he could fab a set of mounts and he said he's looking into it....so I'm staying hopeful.....
Thanks bro.
Steve reinkens does not preferred the Ks racing swap kit I am still looking for prefect kit can fit for this swap project.
Last edited by JAROODMI; 12-15-2015 at 03:39 AM.
Saw that they're back on ebay once again....$200 and $150 shipping...this was on saturday
Not really...but u can do a little research....steve did says that they are junk and I believe him to a point...he says the quality is really really low etc....also he says that they are not for LHD vehicles....so...maybe u can do some research and get some other opinions.....
I found some persons who purchased the 1jz,2jz Mount Swap Kit for bmw E34 , M5 (#271871866973) give the buyer ks racing +++ positive feedback. what do you think?
http://feedback.ebay.com/ws/eBayISAP...e&mPg=5&page=2
Last edited by JAROODMI; 12-26-2015 at 01:27 PM.
Well I would try to make contact with him if possible and try n get his opinion. ..if not...there's only one true way to find out and that's to buy the set and try it out yourself....as for me....if don't think it'll make much sense, cuz the cost my mechanic is charging to install the engine and tranny and do the drive shafts work, is costing around that figure...he also has a 2jz in a bmw e30...so he has quite a good idea of the works necessary to get this conversion to work up.....so, dollar for dollar value, I'll go in that direction and have him do the install and fab work...it just makes better sense for me....
I've been eyeing those same blue mounts from Thailand. I also think it'd be more of a hassle since they're not intended for LHD BMW's. I'm probably going to have a shop fab some brackets for me unless someone else has a lead to some good mounts.
This member has all the answers for JZ into e34 LHD cars. He modified the same blue mounts you posted.
https://www.bimmerforums.com/forum/s...&highlight=1jz
Bookmarks