EXCLUSIVE 288 280 cams - Schrick

[m3e46freak]

Since we all know cams are on backorder...
I have spoken to a supplier of mine and he is releasing some of his own personal schrick stock for sale across the community!!
Details:
- 288 280 only
- $1550 shipped (pay paypal fees)
- limited supply
- DLC coated rocker arms/followers recommended
- 16 days shipping time approx, HOLIDAY SEASON does take a while
- m3e46freak@yahoo.com for outside contacting.


thanks guys!

FREQ
EUROGOD
Don

[radicalr6]

These things are soo pricey! Bump.
How would the car run? If all stock

[m3e46freak]

Obviously it would need a tune and a few dyno runs prior to install to see where the car stands

I've seen a good strong engine with supporting mods do an addition 25rwhp

[m3gam]

What engine would these be good for

[m3e46freak]

What engine would these be good for

S54engine.

But I can get schrick cams for any platform.

[m3gam]

What about 328i? after the same profile as the us spec M3?

[m3e46freak]

What about 328i? after the same profile as the us spec M3?

Definitely not the same as the M3, I would suggest you do a little bit more research on the forum as to what you want and let me know,

thank you

Don

[m3gam]

Well I'm after a set of cams to fit a m52 328i engine. I know that people use either USA M3 s50 or S52 Cams or schrick cams using similar profile to the USA M3 s50/52 cams.

- - - Updated - - -

Schrick do a 252/116-91 intake & 244/106 exhaust

similar to the m3 USA specs which are i believe from research
S50 cam specs
Duration / Lift
252 / 10.2 Intake
240 / 9.7 Exhaust

S52 cam specs
Duration / Lift
250-252 / 10.2-10.28 Intake
244 / 9.67- 10.2 Exhaust

[m3e46freak]

The problem is...there are to many bloody level of cams you can get for the e36 m3 engine platforms based on the engine or what country you live in lol.

Tell me exactly what you want by part # and I can get them to you mate