Yes, use the slotted mounting holes with weld in brackets. I got mine from Ireland, but looks like they sell the same ones as Garagistic now. I also recommend keeping the control arm bushings rubber. Use urethane for the subframe mount and the differential mount and up front. The rubber just seems to stay in place better.
- - - Updated - - -
Here is the one I used:
Posi-lock
http://www.iemotorsport.com/bmw/E30-...bkit-lock.html
Looking good! I just got a ti myself and am planning to swap it in time for summer..
I'll sell you e34 rear calipers, then all you need is new pads..
Here are a few of my questions/concerns.
- I have deleted the A/C compressor and the power steering pump. Where can I get the proper sized belts that no longer need to go around those items.
- I tried test fitting the rear subframe bushings from Condor w/12mm riser and it doesn't seem that the bolts are long enough to allow enough thread engagement on the bottom for the nut. Has anyone else had this issue? Is the Ti different from the E30 rear end when it comes to that subframe bolt hanging from the bottom?
- I took the wiring harness from the same M3 that I took the motor from. The Ti does not have anything to connect to the center circular connection of those three that are all lined up next to the fuse panel. Is there anything special I need to do with that connector, or just leave it off? Is there some kind of adapter?
- Should I connect the M3 guage cluster, or leave the Ti cluster in place?
- any other tips or tricks with hooking up the wiring harness would be great. That's kind-of what I'm working on right now.
- Also need to do a battery relocation kit to the truck. Any good ideas for doing that would be helpful as well.
As always, any help/suggestions are greatly appreciated. Thanks in advance.
You're aware no one can see your pictures, right?
You can upload your pictures directly to the forum, though I think you're limited to five images per-post.
Tipsy
Last edited by TipsyMcStagger; 09-12-2017 at 01:52 PM.
Here's a few more pics
additional pics
more additional pics
photos
This should make it a bit easier for everyone to view:
Last edited by TipsyMcStagger; 09-12-2017 at 02:08 PM.
more
- - - Updated - - -
Thanks. how do i make that happen the first time?
Last edited by WPritchett; 09-12-2017 at 02:25 PM.
mores
test
- - - Updated - - -
Winner!
Last edited by WPritchett; 09-12-2017 at 02:22 PM.
Bookmarks