I have both OBD EX and vlinker FS cables. I cannot get either to work on my laptop with windows 10. OBD EX worked previously.
INPA doesn’t see the cable and I suspect the same is true for ISTA.
Can anyone help me with connecting? I’m at my wits end here
Sent from my iPhone using Tapatalk
Is there another forum that can help me with?
Sent from my iPhone using Tapatalk
Short of being there in front of that computer, it's really challenging to get a sense of what's going on.
Can you provide a lot more detail and elaboration on it?
Are your drivers installed, COM ports you said are fine. The cable brands you mentioned are China names, so it's impossible to know what that actually means in terms of cables, etc.
Then there's a bunch of car specific settings that require configuration and more info about.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Drivers installed. Port settings are set as requested by hardware. INPA simply doesn’t find the cable. I really don’t have more info to offer…
So frustrated because this is the only way I’m going to get the codes I need. My other scanner won’t pull them.
Sent from my iPhone using Tapatalk
Sigh, you're not making it easy to help you.
What car exactly are you trying to diagnose?
What is your configuration like in ediabas, ista, etc?
What does your cable look like?
More info is better than none. Pictures, anything.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Ok, sorry. 2009 BMW 328. Dell laptop running windows 10
I don’t know what other info I can offer
Sent from my iPhone using Tapatalk
What does your obd.ini file say?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Also it looks like OBD Link EX is an ELM327.. not ideal at all. You should get a K-DCAN cable with a switch. Switch is for going between dual K line and DCAN
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
So this won’t work? I swear I used it once before?
Sent from my iPhone using Tapatalk
On the 2009 E90?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Correct. Both of these cables supposedly switch automatically…
I’m 90% sure I’ve used it before with ISTA+ less sure about INPA (my German is no good)
Sent from my iPhone using Tapatalk
Cable allegedly switches automatically
Sent from my iPhone using Tapatalk
Bookmarks