Results 1 to 2 of 2

Thread: Geting Ediabas-Error ApiCheckJobStatus when reading Lambdavalue on E46 N42

  1. #1
    Join Date
    Sep 2006
    Location
    Dublin, Ireland
    Posts
    63
    My Cars
    2000 316i Compact

    Geting Ediabas-Error ApiCheckJobStatus when reading Lambdavalue on E46 N42

    I'm using Inpa 5.0.6 and all data works ok except for < F6 > Analog Value 3 within Engine < F5 > Read Status

    I'm getting the error popup Ediabas-Error ApiCheckJobStatus as shown below

  2. #2
    Join Date
    May 2018
    Location
    UAE
    Posts
    14
    My Cars
    1998 BMW Z3 Roadster 2.8
    Hi, I think I got the same problem, I use the below software package installed on my lab top Windows 8.1 to Diagnose BMW Z3 1998 2.8 Roadster MS 41.0, M52, things are working properly, only when I click the page of Analog 2, I get the error shown on the attached picture.

    If any advice available I will be grateful

    Software Package
    INPA 5.06
    EDIABAS 7.3.0
    NCS Expert 4.0.1
    NCS Dummy 0.6.04
    Tool32 4.03
    WinKFP 5.3.1
    BMW Coding tool v2.5.0Untitled.png

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •