How much for cat less and no resonator x pipe ?
Last edited by Beamerboy356; 05-15-2015 at 08:18 AM.
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
I have this piece http://store.bimmerworld.com/bimmerw...ipe-p1280.aspx
mounted to this http://store.bimmerworld.com/bimmerw...low-p2330.aspx
These pieces rob power down low. What I'd like is 2 pipes like what you have for sale that will mount to the headers I posted.
Here is a link to the headers I pictured here with sizing of the piping used.
http://www.ebay.com/itm/Manzo-Stainl...ecf805&vxp=mtr
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
GG///M3, we can make custom for your and for others...for same price but need some input. In croatia i dont have access to US exhaust.
1. Diameter: Your headers have 55mm diameter, mine have 60mm. Is it this bad, do I need to make new with 55mm?
2. Flanges: Your flanges is flat my is offset, spread between pipes need to be measured...simply, you can use school water paint, put it to your header flanges and press paper on it. you have fingerprint from your headers pipes and flanges. send me scan of this and we will make this for you. With or without resonators, cats or without cats (price go up off course)
3. Is it flanges in same vertical distance from chassis?
I dont want just to grab money, really want to make sure that product will be plug&play.
Or I can send to you measurement and you can make some adapter?
Last edited by foler; 05-16-2015 at 04:38 AM.
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
Bump i have a set of headers that will work for these mid pipes.
http://www.bimmerforums.com/forum/sh...1#post28559801
Last edited by GG///M3; 05-23-2015 at 04:50 PM.
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
What kind of tune would you recommend with the resonated pipes?
S50b30 Euro
1995 325is 5 speed S50B30
I like the colour, No Bias
Because Racecar
-Did you hear that?
Would love plug and play mid pipe for US spec. I don't want to get rid of my stromung rear exhaust
98 Estoril ///M3 4/6
S54 swap CSL
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
What exactly do u have for sale for e36 m3
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
How much for non resonated with cats midpipe for e36 M3
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
always trying to make it lighter and faster
^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
current build: http://forums.pelicanparts.com/porsc...car-build.html
instant grams: doktor_b
Someone send the man US specs on the OBD2 midpipe so we can get these made.
98 Estoril ///M3 4/6
S54 swap CSL
Can you make this with a single 3" outlet muffler in place of the resonators?
Powder Coating... http://forums.bimmerforums.com/forum/showthread.php?t=1496991
Bay Area/San Diego Fender Rolling... wavewarrior2@comcast.net
95 M3- 2876lbs
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
This would be very interesting if it fit US models! Has anyone gutteed out their cats to achieve similar results?
http://www.youtube.com/watch?v=Ocrvaw3d4UM Dont drive over limited speed!!! Drive safely......
Bookmarks