Supersprint decat x-pipe for M3 E36...

[foler]

I have EXACT replica supersprint decat x-pipes for M3 E36, model 043612 (http://www.supersprint.com/en/IT/pro...80BA___96.aspx), and with resonators models 784302/784346. Can be used on US model but you need to have euro like headers and muffler or custom headers/muffler. Euro have 60mm (2.25") pipe diameter vs US have 50mm (2").
Welded with argon (not poor tig), the best T304 polished stainless steel, mandrel bent, x-pipe weight around only 6-7kg, 10kg with resonators, 60mm pipes diameter...

Now because of shipping size limitation decat is composed from two part. You join decat in single piece with 4 bolts and little sealer. You can weld flanges if you want permanent single piece.

Price 398$ INCLUDE shipping to USA for resonator model. 350$ model without resonators.

Dont miss this "better than original package".











folder with hi-res pictures
https://drive.google.com/folderview?id=0BxYvzFltiqftcy1vcGZubjZpYU0&usp=sha ring
https://drive.google.com/folderview?...mc&usp=sharing

[jesus619]

Any video of how it sounds? Fitment?

[foler]

Any video of how it sounds? Fitment?

Fitment is plug&play...bolt on if you have euro headers/muffler...
sound is difficult to explain. This depend on rear muffler, microphone used, camera etc...Most problems with sound recording is that microphone never capture echo/reverb from space around the car so recorded sound is always thin. I have very good experience with sound recording and know that any car sound much better in person than on video.

Here is sound with eisennman race rear muffler with xpipe with resonators:

[pbonsalb]

Looks great.

[foler]

tnx

[BMWkidM3]

Bump

[foler]

I check and seem that EURO centre section is not plug&play for US m3 e36 car. This product is for EURO headers/muffler....US model have diameter pipes 2" vs 2.25" for euro.
If someone have some comment on this fitment euro vs US post it.

[gotboost79]

Wow this looks awesome and seems like a bargain too! If i didn't just have a custom mid pipe made for my s54 swap I would've attempted to bolt this on.

[pbonsalb]

Use euro or Raceland euro ss spec headers to match at front. Need euro or euro SS rear exhaust to match at rear.

[GG///M3]

Use euro or Raceland euro ss spec headers to match at front. Need euro or euro SS rear exhaust to match at rear.

Correct. I have a set of those headers for sale here.http://www.bimmerforums.com/forum/sh...-exhaust-studs

GLWS OP

[foler]

two resonator version is sold...in future if someone want it I will make to order...now i have 3 xpipe without resonators ready for ship.

[radsock]

Do you have any catbacks that bolt up to this for sale?

[foler]

Supersprint street original but need ti check with my friend

[doktor b]

subscribed so i remember where this is when i start into exhaust after April.

[foler]

bump

[foler]

bump
Finally I have Paypal!!!

[M Dizzle]

Not a forum vendor, and your signature is stolen from a local mid atlantic racer (unless you bought his car?), yet you're from croatia?

I'd be skeptical of sending any funds to you.

[foler]

Not a forum vendor, and your signature is stolen from a local mid atlantic racer (unless you bought his car?), yet you're from croatia?

I'd be skeptical of sending any funds to you.

ok, signature deleted.
I sell two decats to USA and Canada. Have future buyers in Sweden and Australia. Sorry, but I am not deceiver. Also I have listing on ebay. Also look at number of my posts.

[hakstern]

ok, signature deleted.
I sell two decats to USA and Canada. Have future buyers in Sweden and Australia. Sorry, but I am not deceiver. Also I have listing on ebay. Also look at number of my posts.

I purchased one of the catted x-pipes off foler. Trusted guy! Fast shipping! Came to me in about 2 weeks? He kept constant contact with me throughout the entire purchase all the way to the delivery day.

[Beamerboy356]

What exactly is for sale with prices I'm interested

[GG///M3]

Wow this looks awesome and seems like a bargain too! If i didn't just have a custom mid pipe made for my s54 swap I would've attempted to bolt this on.

I'm thinking seeing if this would fit my swap since the current exhaust setup I have is leaving power on the table.

[foler]

Many ask for this which have S54 swaps!!! I think that S54 headers have different (flat) flanges to decat. Maybe is diameter for headers pipes different than euro. But, if someone send me EXACT plan on paper I can make it for you for same price. Any exhaust part we can copy. Ideally If I can have sample US OE centre section. I am in contact with my friend which have US version here in Croatia.
Maybe some can write about differences between euro vs us exhaust components.
Look at this pictures. Euro headers have offset/stepped flanges and S54 headers is flat to decat:

My euro flanges is offset:


S54 flanges is flat positioned to decat:

[GG///M3]

I'm running after market s54 headers decated, so if you can figure that out I'd be interested considering the headers come down to about the same sections the euro's would

[foler]

Do you can post some pictures of headers connected to midpipe, or picture exact headers which you have.

[GG///M3]

Here is a link to my thread http://www.bimmerforums.com/forum/sh....php?t=2175864