Picked up a '95 M3 a couple months ago to turn into a dedicated track car. I've been tracking my Focus ST for a couple years now but its time to move on to a more permanent track car. I found this one that needed gutted anyways and bought it for next to nothing. Well now I'm well into with nearly everything on the front end replaced/upgraded. Got most of the interior out and seats ready to install and will finish up with oil temp, pressure, and water temp gauges this week. After that its on to the rear end which I should have everything ready to go (except a rear gear upgrade for later). So here's my ode to joining the E36 parade. Was a former E60 M5 and E30 318is owner.
Plans are for the first season to keep the car street legal with all the glass and no cage. I hope to add at least a roll bar/cage next year. I plan to run at Mid Ohio, VIR, NCM, Summit, and Putnam Park.
Had to trailer this beast home.
The interior was spotless!
My son turning wrenches....father of the year?
Had to repair a couple wheels...
Replaced nearly every piece of rubber under and on the intake. Water pump, t-stat housing, removed a/c, adding oil cap with oil cooler this week.
First oil change was a great success!
So I had to buy a tow rig...
- - - Updated - - -
Focus track day vid....
https://www.youtube.com/watch?v=50ols_NCWH0
PR: 1:46 w/chicane
1:44.9 Pro
Very cool! you are off to a great start I can't wait to see what you have in store for this build
1996 328i (m52B28US) OBD1 euro ZF 5spd. 3.23LSD conversion / Chem. PnP Head/ DINAN stg.2 CHIP/ VAC race valves/ S52 cams/ A/C delete/ fan delete/ Washer Fluid resv delete/ ARP head studs/ Cometic 140MLS / VAC Solid Engine/trans Mounts/ CAI / 2.5"Borla race exahaust/ NGK R spark plugs, M50 Mani, S50 Oil Res, Riot Racing HFTB, SAMCO Hoses, JBR FW, X-Brace, Mtech Front Bumper, RE RSMs, stoptech SS lines, Bilstein sports, H&R Race Springs, S52 Reinforcement plates, Kosei K1 w/ bridgestone RE960as, Brembo/stoptech slotted rotors, M3 Trailing arms, M3 Calipers, M3 Axles, ACS strut brace, weight reduction.
http://mbuild.blogspot.com/
Thanks. I'll hopefully have some updated pics this week with the car finally back on the ground.
Also the purpose of this thread was for me to open this up to any recommendations or considerations being my first E36 build. Thanks
Looking great! you're on the right track for a great track car. keep the updates coming
Whats behind you doesn't matter
Black E36 M3 - Blackbird
Silver 2007 New Body 2500HD - The Judge
Very cool!
OH the slippery slopes we walk on to......
Looking good have fun and keep the boy at your side!
Always FUN TO DRIVE - Build Thread & Tech info - 79 320/6 track car build thread -- Videos of track car -Adam in car Auto-x video - Start-up video - 4/2011 Adam's TOP BMW time San Diego BMWCCA - 4-5-15 Dyno break-in run new M20B25 - Exhaust Thread - Link
Got seat mounted and wheel in today. Next up pulling replacing the hubs.
Nice start! Powdercoat the wheels or pro rattle can job?
Edit: I was on my phone at first, just looked at pics on computer. New question! What rattle can paint did you use?
Last edited by NotUrAvgM; 01-28-2015 at 07:04 PM.
[2004 330xi/6] Orient/Natural :: 117-142k :: ZSP :: ZPP :: ZCW
[1998 M3/4/5] Cosmos/Black :: 113-125k :: TCKline D/A (500/600) :: GC Plates :: RD Sways :: GC Rear Arms :: ZHP Rack :: 3.64 Diffsonline :: PF FCAB :: BW RTAB :: AKG Subframe :: TMS Pulleys :: AA & Borla :: XBrace :: TRM C2s :: BW lines :: DTC60 :: Safety Equipment
Past:
[1995 M3] Avus/Dove :: 141-242k :: S52 OBDI :: M50 manifold :: 3.5 HFM :: Turner Chip :: XBrace :: SS Lines :: Turner RTABS :: Vogtland CS :: Bilstein Sport :: Z3 rack
[1999 M3] Cosmos/Black :: 65-87k :: TCKline S/A (400/500) :: Turner plates :: UUC Front Sway :: PF RTABs :: AA Intake :: Borla :: XBrace :: TRM C2s :: CL RC6E :: Safety Equipment
[1993 325is] Brilliant/Black :: 135-139k :: Bilstein sports :: Eibach sways and springs :: Dinan camber plates and chip :: Borla :: LSD
[1983 320i] Safari/Brownish :: 219-242k :: homebrew CAI :: some rust :: multicolor body panels
1st round of plastidip. Probably won't stay with those wheels.
Nice build! If you need any rear bushings or RTABs, hit me up. I bought extra when doing mine...DOH!
I was in the same boat as you last summer...I retained a little 'streetability' in mine as I need to wait to get another daily driver before really tearing things out.
Subscribed....
The sarcasm in the first post made me LOL!
Good luck with the project! If there's anything we can help you out with along the way don't hesitate to give us a call!
Last edited by Frank@AchillesMotorsports; 01-28-2015 at 08:24 PM. Reason: i duznt spel gud
I need the rears. I'll let you know when I'm ready to drop the cradle.
A/C delete really opens up the bay.
New Mushimoto radiator...
New stopping power...
Replaced everything but the spindles.
How are guys with aftermarket radiators mounting the expansion tank?
- - - Updated - - -
Also any advice on headers? S50 motor and while I'm throwing money into this bottomless pit I am going with basically straight exhaust and wanted to go from header back. I'm not looking for historic hp here, cheap eBay headers seem to be the way to go. Is there a particular one?
[2004 330xi/6] Orient/Natural :: 117-142k :: ZSP :: ZPP :: ZCW
[1998 M3/4/5] Cosmos/Black :: 113-125k :: TCKline D/A (500/600) :: GC Plates :: RD Sways :: GC Rear Arms :: ZHP Rack :: 3.64 Diffsonline :: PF FCAB :: BW RTAB :: AKG Subframe :: TMS Pulleys :: AA & Borla :: XBrace :: TRM C2s :: BW lines :: DTC60 :: Safety Equipment
Past:
[1995 M3] Avus/Dove :: 141-242k :: S52 OBDI :: M50 manifold :: 3.5 HFM :: Turner Chip :: XBrace :: SS Lines :: Turner RTABS :: Vogtland CS :: Bilstein Sport :: Z3 rack
[1999 M3] Cosmos/Black :: 65-87k :: TCKline S/A (400/500) :: Turner plates :: UUC Front Sway :: PF RTABs :: AA Intake :: Borla :: XBrace :: TRM C2s :: CL RC6E :: Safety Equipment
[1993 325is] Brilliant/Black :: 135-139k :: Bilstein sports :: Eibach sways and springs :: Dinan camber plates and chip :: Borla :: LSD
[1983 320i] Safari/Brownish :: 219-242k :: homebrew CAI :: some rust :: multicolor body panels
[2004 330xi/6] Orient/Natural :: 117-142k :: ZSP :: ZPP :: ZCW
[1998 M3/4/5] Cosmos/Black :: 113-125k :: TCKline D/A (500/600) :: GC Plates :: RD Sways :: GC Rear Arms :: ZHP Rack :: 3.64 Diffsonline :: PF FCAB :: BW RTAB :: AKG Subframe :: TMS Pulleys :: AA & Borla :: XBrace :: TRM C2s :: BW lines :: DTC60 :: Safety Equipment
Past:
[1995 M3] Avus/Dove :: 141-242k :: S52 OBDI :: M50 manifold :: 3.5 HFM :: Turner Chip :: XBrace :: SS Lines :: Turner RTABS :: Vogtland CS :: Bilstein Sport :: Z3 rack
[1999 M3] Cosmos/Black :: 65-87k :: TCKline S/A (400/500) :: Turner plates :: UUC Front Sway :: PF RTABs :: AA Intake :: Borla :: XBrace :: TRM C2s :: CL RC6E :: Safety Equipment
[1993 325is] Brilliant/Black :: 135-139k :: Bilstein sports :: Eibach sways and springs :: Dinan camber plates and chip :: Borla :: LSD
[1983 320i] Safari/Brownish :: 219-242k :: homebrew CAI :: some rust :: multicolor body panels
I found an S52 set. Thanks
Picked a set of the S52 headers,....question. Can I run them into a collector and run a single pipe straight back into a muffler? I haven't even been under the car to look but that's what I assume the oem setup is already. I want to take it to a local shop to have them do all the work but figured I'd need to know what I'm getting into.
Picked up some BMW 162 18" wheels cheap, plan to run them (since I already have a set of slicks and r-comps in 18"s from my ST). I'll post more pics this weekend.
Update time. Finally got all the engine work done, front suspension and nearly all the interior gutted including excess wiring. I was about to drop and replace the rear sub frame but I got a hookup on some body work and paint. I've been tossing with the idea of Signal Green but decided on Azure Blue, since my interior (seats and roll bar) will be red I think it will look good together. It goes for paint Monday. I hope to have it on the track by the middle of May. Mid Ohio and NCM are calling!
i like where this build is going!
(also providing me with some inspiration to go pull some more weight/crap out of my own car)
Pulling the wire isn't as bad as I thought it would be. That one pictured is just the radio to rear cd changer!
I think I've changed my mind on the blue, I think I'll go with Estoril instead.
She's back! Got some body work done and decided on Estoril blue and I think it turned out excellent. Can't wait to get a set or hyper silver wheels and vinyl on.
Got a new/used subframe to swap in with all new bushings, the used one had to be welded up as the factory welds were terrible and cracked. Also another BMW followed me home yesterday, '89 325 IX!
looks good!
always trying to make it lighter and faster
^^former build: http://www.bimmerforums.com/forum/sh...-neglected-M3/
current build: http://forums.pelicanparts.com/porsc...car-build.html
instant grams: doktor_b
Bookmarks