Hey all,
I apologize for my(our) 5 month hiatus. Summer 2018 has been nothing short of insane. The e39 NBT development didn't stop but slowed down a LOT. Only thing really done with the E39's NBT in that time period was finding a better way to mount the display(hacked up F10 bezel) which is purely there for function. Was *not* worried about form here lol.
There were a lot of events that attributed to this:
-Ken's E39 M5 decided it wanted to have the entirety of it's driveline serviced, from starter, clutch, flywheel, RMS, all the way back to the diff seals and subframe bushings.
-Various issues with all 3 cars that currently reside at my place, the E61, E39, and the LGT
-Various side gigs on N63 powered 550's
-Ken's GF's E60 decided some time ago that it was going to leak water from the sunroof cassette. This went undetected long enough to ruin nearly ever piece of the interior that wasn't hard plastic so we elected to go all in with a top to bottom interior swap using various E60 M5 and E66 parts, dyed the dashboard silverstone, the rest was replaced with silverstone/black, plus the addition of NBT. This alone was nearly two months worth of work, it was no small feat, and NBT is still not done in the E60; functional, but not done. We're gluttons for punishment, I tell ya.
All this said, I'm glad to see the thread is alive and well. We hope to be able to continue contributing as we get closer to winter. Photos below aren't even close to all of what was taken over the summer, only what will fit in this post.
20180506_172126.jpg
20180718_000152.jpg
20180722_180817.jpg
20180912_033927.jpg
20180914_015643.jpg
Garage Queen: Biarritz Blue 540i6
Daily Driver: Burger Tuned Titan Silver 535xiT
Sold: RHD Steel Blue E46 328i
Sold: 2006 Black Sapphire M5
Hello, great Job! I‘m really impressed!
At the moment I‘m trying to get also a running NBT on my Desch. I would like to use it later at my E31, but it a special car with engine and transmission from a E38. So I want to use NBT and iDrive Controller stand-alone.
At the moment there are at least two main problems - I ‘ m a beginner!!
1. I ‘ m using a Raspberry Pi 3B with Pican2 interface and I connected it to a BMW NBT head unit high from a F10 of 2014. It was possible for me to get the NBT starting. I was sending with cansend the CAN wake up command 130#4540 in order to wake up the device. Nothing happens. With can dump on channel 1 I saw the command. I connected the Bus with 500 baud. What should I do or send ? Is it the right way to connect PICAN2 directly to NBT can Bus with two 120 Ohm resistors for terminating the Bus?
2. To use NBT at the E31 I have to use at maximum a 6.5” CID Display from a BMW F30. How can I run it on NBT high?
I would be very glad if you can give me some support!
Thank you in advance!
Dear Ralf
Can somebody tell me if in the e38/39 you have the rdc tyre pressure monitor does this come through to the nbt? Or cannit without to much hassle?
Sent from my iPhone using Tapatalk
Although specific to rdc I also wonder about rpa too? Also is there anyway for the oil display to work? Thanks
Sent from my iPhone using Tapatalk
Sorry if this has been asked, but can this work in E46 M3?
2016 328ix | Wagon | M-Sport | Alpine White | Black | iND | 513M | AC Schnizter | MPerformance |
2005 330CiC | Sparkling Graphite | Black | 6MT | ZHP
2004///M3 | Individual Sterling Gray | Imola Red | 6MT | Eisenmann | Style 163M | SOLD
2011 X5 35d | Black Sapphire | Nevada Brown Cinnamon | Sports Package | Totaled
2009///M3 | Interlagos Blue | Pallidum Silver | DINAN | MPerformance | DCT | SOLD
2002///M3 | Steel Gray Metallic | Imola Red | 6MT | Convertible| SOLD
2006 X5 4.8iS | LeMans Blue Metallic | Creme Beige | SOLD
2006 ///M3 | Silver Gray | Black | Competition Package (ZCP) | 6MT | SOLD
2000 ///M5 | Oxford Green Metallic II | Caramel Nappa Leather | BMW Individual Black Birch Trim | SOLD
2003 X5 4.6iS | Black Saphhire Metallic | Black Sport | SOLD
2006 X3 3.0i M-Sport | Silver Gray | Terracotta | SOLD
E46 M54B30 MT Touring = ESS TwinScrew + SS Headers + S38 Flywheel&Clutch + MFactory LSD 3.07 + Koni Sport + Eibach Pro + ///M3-Look
=============================
imBMW.net = BMW + iBus + .NET MF + .NET PCL & UWP + Bluetooth + Arduino + STM32 + music + handsfree + DIY + DBus DS2 DME Logging + etc...
Bump
Sent from my iPhone using Tapatalk
Sooo are 3d maps & Tmc pretty much hit or miss with the nbt system? Is anyone getting really robust 3d maps?
Hi all - hope everyone is well...
Question would this work in any way if I did not connect the ibus wire but connected everything else?
Sent from my iPhone using Tapatalk
Y tink not,the emulator is reading the ibus and convert fhe ibus mesage to canbus to power on the nbt and other options
HI,
somebody can sell a display bezel for e46?
Thorsten
So who sells the harness and where can I get the bezel?
Sent from my cheap Droid turbo using Tapatalk
"A good scientist is a person with original ideas. A good engineer is a person who makes a design that works with as few original ideas as possible. There are no prima donnas in engineering." - Freeman Dyson
So who has an EVO up and running reliably? Mine has been in boxes for the last couple years. Just curious who got it going.
'02 TiAg/Blk E39 ///M5
'08 JZB/FR E92 ///M3
In short order this upgrade will be as obsolete as those who retro'd the e38/39/46/53 NAV systems into their cars.
2001 Z3 3.0i -Oxford Green/Sandbeige
2016 428xi -Estoril Blue II/Black
2018 430iC- Estoril Blue II/Black
2018 330it - Melbourne Red/Venetian Beige/Black
2001 Z3 3.0i -Oxford Green/Sandbeige
2016 428xi -Estoril Blue II/Black
2018 430iC- Estoril Blue II/Black
2018 330it - Melbourne Red/Venetian Beige/Black
"A good scientist is a person with original ideas. A good engineer is a person who makes a design that works with as few original ideas as possible. There are no prima donnas in engineering." - Freeman Dyson
"A good scientist is a person with original ideas. A good engineer is a person who makes a design that works with as few original ideas as possible. There are no prima donnas in engineering." - Freeman Dyson
Hey all been reading this thread the past couple days and I am interested in this retrofit into my e46. Big interest in the raspberry pi route. I’ll for sure keep watching for any updates.
EURO 04 M3 Current Mods: GC DA's, Eibach ARB's, INTRAVEE II + Alpine KCA-420i, Depo's, Screen protector for OEM 16:9 display, VCSL Bumper + Race Lip + CF Boot + CF Rear Diffusor, DIETZ TV in Motion, Z8 Starter Button, BBS CHs, Lamin-X, STORM SMG Paddles, RE RTABs/RCAs, OEM CSL Interior, OEM CSL Intake, M3 CSL HP DME, TTFS Tune, STOPTECH ST40's, FXR 3.0 Projectors, SS Stepped headers + Catless S Pipes + Res X-Pipe + Sport Muffler, OEM CSL Roof, OEM CSL Steering.
Bookmarks