-Brand new square set of 17x8.5 polished OEM LTW wheels
-ZHP illumination shift knob (leatherz.com)
-OEM cabin filter
-OEM air filter
-OEM side skirt rivets (x4) - two of mine were looking rough, so I decided to replace all 4 just out of OCD.
-OEM rubber pedal covers (clutch and brake pedal)
-OEM front license plate "delete" trim piece
How much do dealers usually charge for the stamped style 24s?
I usually use ECS Tuning for parts. The caps and M badges were about $85. The refurbished rims came out great, they'll look even better when I put the rest of the parts on them.
.
Personally, I wouldn't buy from the stealer.
http://www.ecstuning.com/Search/3611...FUs2aQod_TMAIQ
Last edited by GG Allin; 09-19-2014 at 10:33 AM.
1988 911 - Carb'd - Twin Plug - 3.6
1999 SL 500
2016 4Runner TEP - Gone
1995 M3 - LS2 - Gone
1998 M3 - Gone
1991 M5 - Gone
1993 RS America - Gone
1995 M3 - Gone
I purchased them BNIB from the dealer, but I have a hookup thankfully. You can message Kaiv, he may be able to source you some for a deal. Keep in mind, if you're serious about wanting to pick some up you need to do so as soon as possible. There were only 7 in the US as of Wednesday and I just bought 4 of them. You're still going to pay around $400 per wheel, but that's a steal in my mind for the best looking wheel for the E36/best looking OEM BMW wheel made. The polished LTW are now discontinued so the only ones left BNIB are the 3 left in North America and whatever is in Germany. Now is the time to buy LTWs.
Stamped LTW have been discontinued for a while, I just bought the polished version which I think look better than the silver painted stamped variants.
This week I bought a 98 Estoril Sedan. And also a valve cover gasket, spark plugs, coil boots, RTABs, FCABs, resonators...
I just want it running well and sounding normal
http://i.imgur.com/PvAup3r.jpg
X-brace
TMS strut bar
TMS shorty hearers and all new hardware.
Schrick cams
BavAuto Hi-Po coils
Aka too much:/
98 M3 sedan
OE BMW fan clutch
New hood latches
coolant system
rotors and pads front/rear
front inner fender liners
front/rear struts
bbs rk wheels and hankook rubber
0-40 mobile 1
air and oil filters
Question, I ordered floormats from ECS tuning for my Sedan (specifically chose sedan), and they don't fit like the old ones did. Are sedan and coupe front mats different?
Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
Penn State University '08...better than your school since 1855
Sigma Lambda Beta International Fraternity Incorporated
UTI Class of '10, BMW "STEPchild"
Acurazine.com Mod Squad
Meat! For the '95. I'd like to know where the other 2 are.
IMAG2138_zpsbcb65365.jpg
1988 911 - Carb'd - Twin Plug - 3.6
1999 SL 500
2016 4Runner TEP - Gone
1995 M3 - LS2 - Gone
1998 M3 - Gone
1991 M5 - Gone
1993 RS America - Gone
1995 M3 - Gone
Nevermind, figured it out.
Ordered this week:
- ANOTHER set of mats, returned previously purchased
- New brake and clutch pedal pads
- Motion Motorsports underpanel
- Ambient temp sensor
- HID bulb for blown fog ones
Would've loved to purchase a Rieger lip also, but haven't found where to buy one yet. Bimmerworld is out of stock.
Last edited by Da Infammus 1; 09-24-2014 at 12:41 PM.
Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
Penn State University '08...better than your school since 1855
Sigma Lambda Beta International Fraternity Incorporated
UTI Class of '10, BMW "STEPchild"
Acurazine.com Mod Squad
Finally bought the rest of my shifter refresh kit so I can now install my Bear SSK and AKG DSSR. yay!
Turbo E36 M3 with all the things..
Borla exhaust and new hangers.
AFE 3.5" intake, 3.5" Euro HFM, 24# Injectors, TMS Chip, TMS Pulleys, TMS Shorty Headers, AA Track Pipe, Borla Catback, Billstein Sport Shocks, H&R Springs, TMS Adjustable trailing arms, X-Brace, TMS Front and Rear Strut Tower Braces, UUC Evo III SSK, UUC Shift Nob, DSSR selector rod, Fan delete.....
Ordered...
80c Thermostat / 80/88 Fan Switch
Upper/Lower Radiator Hoses
Redline Water Wetter
Bimmerworld Race Shifter
OEM Clutch Pedal Arm
UUC Clutch Pedal Arm Bushing
M3 Fog Deletes
M3 Front Lip
M3 License Plate Delete Trim Panel
Both front fender liners
5/30 BMW oil and two oil filters
Zerex G-05 coolant, Schwaben jack pad adapter.
Oh and a California plate! Putting my old Arizona 'TRACKM3' plate on display in my place.
Past: 1999 Techno Violet Metallic M3
Present: 2012 BMW 135i DCT Dinan S2, 1985 BMW 325e
new steering wheel from shepott! excited to see the finished product
1997 BMW M3 - Boston Green/Modena
hoping this helps with some annoying/intermittent steering shake.
![]()
^ I need this as well + a ujoint
Bookmarks