buying car parts
Replacing this piece (which has 4 plastic tabs that the actual glovebox slides into) fixed my sag completely.Originally Posted by Santai
http://www.ecstuning.com/ES178720/
Also bought these for the sedan, might redye before I install...
Last edited by SamGrant951; 03-30-2015 at 09:34 PM.
Member
Brake pads.
1988 911 - Carb'd - Twin Plug - 3.6
1999 SL 500
2016 4Runner TEP - Gone
1995 M3 - LS2 - Gone
1998 M3 - Gone
1991 M5 - Gone
1993 RS America - Gone
1995 M3 - Gone
#TeamECPR
- Storm-Motorwerks V1 Shift Knob, Brake Handle and Lighter Plug
- Max Velocity Splitters
- Alcantara Shift & E-Brake Boots
- Foglight Delete Plates
Cosmos Schwarz ///M3/4/5...
"MONEY CAN'T BUY TASTE"
Member
SAP simulator from forum member gpeterson. Worked like a charm.
Euro tail lights from some chap in England. Waiting for delivery.
And I washed it
Member
UUC front camber plates
Member
Maintenance And some goodies
-Cabin filter
-Oil Change kit
-New 3Row Radiator
-New Spark Plugs.
-18'BBS
-Mitchelin tires
-Coilovers
-Catback system
Last edited by TomRiley; 04-01-2015 at 08:49 AM.
Member
Abrahams Motorsport LTW wing for the M I don't have yet. I plan on analyzing it in a wind tunnel and developing a 'dynamic' wing.
Member
Raceland longtube headers, magnaflow 3 inch inlet/outlet #11249 and magnaflow #14815 for a custom 3 inch exhaust. Tune will be done at the end of May when exhaust is installed. Next up is cams... Gotta start saving!
Current:
1998 US m3 coupe.. Home-made Short Ram Intake with heat shield, BMW Factory X-Brace, Eibach Prokit Springs, Whiteline Front Swaybar, Sparco Front Strut Bar, Depo Headlights, Raceland Headers to full 3" with Vibrant Resonator & Muffler, m50 manifold, Markert Motor Works Custom Tune, Schrick 276/270, supertech springs, 24 lb injectors, all sitting on square Style 42s.
264whp/239wtq
Sold:
1995 E34 525i ($400 daily)
Member
Last week:
Front Strut Reinforcement Plates
Front Strut Mounts
Front Control Arms and Bushings
This week:
Michelin PSS Tires
Front Strut Bar
Rear Strut Bar
X Brace
Cup Holders
Z3 Steering Rack
Head, Tail, Side Lights
Drivers Seat Back Gear
Near Future:
Looking for a used front sway bar...still on the hunt. Was just notified that one of my wheels is bent and essentially is a slowly leaking air after installing the new tires. Guess new wheels are next as well. Sigh
buying car parts
Ugh I have to do that too, of course the vaders I just installed both seat backs are in-op so out they come again. Luckily they are in the right position lol so I can drive the car at least.Drivers Seat Back Gear
Member
last week was UUC/ECS BBK featuring Wilwood Superlite calipers and e46 M3 rotors (just received the ECS 2pc rotors today)
installed 24# injectors, AFE intake, 800 3.5" HFM, BW silicone tb elbow, and RKTunes chip over the weekend.
this week will be RR BBTB, BW spherical RTABs, spacers up front (to clear BBK), and proper alignment.
also starting my vinyl wrap saturday.
Member
Wasn't all bought this week, but installed between yesterday and today...
Member
Oil, filter and those window regulator clip thingies...
Sent from my iPhone using BF.com
AFE 3.5" intake, 3.5" Euro HFM, 24# Injectors, TMS Chip, TMS Pulleys, TMS Shorty Headers, AA Track Pipe, Borla Catback, Billstein Sport Shocks, H&R Springs, TMS Adjustable trailing arms, X-Brace, TMS Front and Rear Strut Tower Braces, UUC Evo III SSK, UUC Shift Nob, DSSR selector rod, Fan delete.....
Member
Bride Gias v2 Low max(sold minty vaders)
Vanos Oil line and crush washers
Fog light Delete covers
Black Carpet
Coming Soon! thebimmerdude Youtube Channel.... Everything Bimmer...Everything...duuuddee
1999 e36 Convertible Hardtop - Sypder (byebye softtop conversion )
http://www.bimmerforums.com/forum/sh...5#post28143955
WMRRA #22
Rieger GT Lip
Member
2800.00 engine rebuild, costly but worth every penny
Ancient Member
At that point, why not just buy a low-mileage replacement motor for half the price?
senior LOUNGE theologian
There's something about starting your motor that has never been started before that is cool. And you know the mileage. You know who built it. Everything is good, for sure.
I would rather run the trans that I rebuilt over a junkyard trans...and I have.
Member
ya, what dohcdoh said, could have put a used engine in for cheaper but i'd always know that other engine was in there and just bug the sh** out of me.
- - - Updated - - -
plus new seals, vac lines, and all the other goodies that go along with rebuild
Ancient Member
Fair enough. It's not always about the cost.
Member
Today she got a new front brake caliper as the original had seized and was causing a horrible vibration.
Member
My alt. went out over the weekend, upgraded the worn 80a valeo for a bosch 140a. While in there I changed out the tensioner, pulley, and idler pulley. also added the ecs rad hoses that I had laying around.
Member
Pair of NTK Up stream o2 Sensors.
Coming Soon! thebimmerdude Youtube Channel.... Everything Bimmer...Everything...duuuddee
1999 e36 Convertible Hardtop - Sypder (byebye softtop conversion )
http://www.bimmerforums.com/forum/sh...5#post28143955
Member
Racked up quite the tab this week, just bought the car and trying to get it in shape.
Fluids (oil, coolant, diff, trans)
Filters (cabin, oil, intake, fuel)
New head unit
Alignment and Tire Swap (BF Goodrich g-Force T/A KDW)
Drivers Mirror Glass
ZHP Shift Knob
Various Bulbs (Fog, Light Switch, Cigarette Lighter, OBC)
Spare Tire Tie Down
Trunk Jack
Sunroof Switch Cover
Valve Cover Caps
Both Roundels
senior LOUNGE theologian
New tires today. It never fails to surprise me how much they cost. Jeez
Posting Permissions
Reply With Quote
Bookmarks