Results 1 to 4 of 4

Thread: first turbo build and need insight!!

  1. #1
    Join Date
    Dec 2012
    Location
    knoxville tn
    Posts
    13
    My Cars
    1995 bmw turbo m3

    first turbo build and need insight!!

    Hey guys this is my first turbo build and i could use some insight.
    I have a 93 325i with 150k miles.
    I have a gt35r turbo kit, 44lb bosche injectors, bav auto high performance coilpack, and arp headstuds.
    I plan on running this high boost cut ring headgasket and new seals.

    http://www.cesmotorsport.com/documents/94.html

    My question is will the stock ecu adjust for what i am wanting to run or do i need an fi/c or standalone? Also will i need anything else in order to get up and running besides a tune up (oil change,filter,and plugs)? Thank for yoyr help.
    Last edited by mmm3power; 06-29-2014 at 09:37 AM.

  2. #2
    Join Date
    Oct 2006
    Location
    Charlotte
    Posts
    4,860
    My Cars
    '97 Estoril M3 Turbo
    You need a tune for sure. CES, RK tunes, TRM, Tecknika, etc. etc.
    | 1997 Estoril M3 - TURBO - |
    | GT35R | 8.5:1 forged internals | ARP stuffs | SS Oring Block w/ elring | Fully balanced & blueprinted 3.3L S52 | Nick G Tuning |
    | 46mm Precision gate| 62# injectors | Dual Walbro's |
    Goal: 600+ whp pump gas reliable 10 second car.
    -2007 335i Sport Package

  3. #3
    Join Date
    Feb 2002
    Location
    Orlando, FL
    Posts
    8,884
    My Cars
    Turbo 97 E36 M3, 99 M3
    Sell the injectors....if your "kit" didn't come with a tune, then it isn't a "kit". You need to give the tuner all the info and he will most likely supply a tune + injector and possibly MAF that he is comfortable with. If you have an exhaust manifold, intercooler, and piping then that's a good start.

    Next, look at the stickied thread in this forum regarding setups....start reading!
    1997 Arctic Silver/Black M3
    CES Stage IV (651rwhp/615rwtq @ 24 psi)

    1999 Techno Violet/Dove M3
    Auto/Convertible and staying stock!

  4. #4
    Join Date
    Oct 2010
    Location
    Manchester, N.H.
    Posts
    16,712
    My Cars
    96 332IS 6466 turbo
    Id also I rethink the turbo choice for a 2.5 . That puppy wont spool till almost 5k. Sell it and get a GT3076 . Or a cheaper precision 6262 ? Not personally familiar with the precisions, but id ask someone who is.
    1996 332IS
    Built 3.2
    CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
    Technique Tuning 80# tune.
    1/4 mile 10.84 @ 136.72
    Your 1 and only stop for all your BMW performance needs
    WWW.CESMOTORSPORT.COM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •