TouringJunkie would like to sign up next Jed.
Updating the reservation list. Tool is with cybervette now.
1. evilrho
2. eawM5
3. zink
4. Rusting
5. cybervette - current renter
6. TouringJunkie
Please add me, Rpeckinpaugh, to the list.
Updating the reservation list. Tool is en route to Jake.
1. evilrho
2. eawM5
3. zink
4. Rusting
5. cybervette
6. Jake - current renter
7. TouringJunkie
8. RPeckinpaugh
Please add me to the list. Thank you
Updating the reservation list. Tool is with member Jake.
TouringJunkie, please respond to my PM. You're next in line and tool will be ready to ship to you in the next day or so.
1. evilrho
2. eawM5
3. zink
4. Rusting
5. cybervette
6. Jake - current renter
7. TouringJunkie
8. RPeckinpaugh
9. amw662158
HI,
Can't use the tool unitl the 27th of June at the earliest. Just so you'll know, but definiitely, desperately want to use it.
Updating reservation list. Tool is now en route to member TouringJunkie.
1. evilrho
2. eawM5
3. zink
4. Rusting
5. cybervette
6. Jake
7. TouringJunkie - current renter
8. RPeckinpaugh
9. amw662158
Just a little update. I haven't used this tool for a couple of years coz well, it's been going all over the country helping fix a lot of these touring's rear subframe bushings. I had the chance this past weekend to use it since it just so happens I had a customer's touring that needed new bushings. All I can say is...man, this tool is awesome!!! I've forgotten how easy the job is with this tool. Awesome, awesome, awesome.
Simple tip is to lower the exhaust at the 2 rearmost mounts, then just lower one side at a time, it will give you all the room you need to slip the push plate and nut. So easy!
Hi. I would like to get on the waiting list for the tool too. Please let me know when is it expected to become available
Updating reservation list. Tool is with member TouringJunkie.
1. evilrho
2. eawM5
3. zink
4. Rusting
5. cybervette
6. Jake
7. TouringJunkie - current renter
8. RPeckinpaugh
9. amw662158
10. cheapE46
Jed, Please put me on the list for the subframe tool. I have the bushings and the subframe is out of the car.
Thanks,
Scott
Updating reservation list. Tool is en route to member RPeckinpaugh
1. TouringJunkie
2. RPeckinpaugh - current renter
3. amw662158
4. cheapE46
5. HartgeM5
I have this kit myself but it's made for regular bushings on E36 and stuff, I have to find it where I can purchase the two super long arms to get around the SF bushing. Quality tool right there.
Can I get on the list, local independent wants $1k to do it.
I would like to be placed on the list as well. Thank you.
Updating reservation list. Tool is en route to member amw662158
1. TouringJunkie
2. RPeckinpaugh
3. amw662158 - current renter
4. cheapE46
5. HartgeM5
6. cosmos4
7. nauqneyugn
Last edited by M5 Jed; 07-16-2017 at 11:05 AM.
Can you move nauqneyugn in front of me? I've got a bunch of time off from Aug 13-26 so if the tool came somewhere in that time frame it would be ideal.
Thsnks
Updating reservation list. Tool is en route to member HartgeM5.
1. TouringJunkie
2. RPeckinpaugh
3. amw662158
4. HartgeM5 - current renter
5. nauqneyugn
6. cosmos4
Hi Jed! I would like to be placed on the list, please. I have my bushings already. Do you think i would get the tool before September 22nd? I've got an auto-X on the 24th that i'm registered for.
Hi, the tool is on its way back to me as we speak from cosmos4 and there's nobody in line at the moment. So yes you're first on the list right now. I just need to inspect and make sure tool is good and clean.
Great! I can send you the deposit whenever your ready
-Tim
Bookmarks