Oh man, I didn't know you had the diff bushing tool as well. I bought those not realizing what a big job they were. Cybervette cleary asked first so he can have it first but if you would be willing to rent me the diff bushing tool as well as the subframe bushing tool I would really appreciate it. Thanks!
Subframe bushing tool is on its way to member FieroSS.
Please add me to the list for the subframe bushing tool.
Many thanks.
-M
Last edited by BikerMikeE39T; 09-01-2017 at 04:25 AM. Reason: Clarification
Hey Mike, I shipped out the tool to you this afternoon. You should have it on Friday.
-Tim
The tool is on its way to the next renter.
I wanted to report my experience with the tool. It worked awesome! Its very easy and works REALLY well. I did it with the subframe completely removed since I decided to remove it for other component replacement.
My car has 202k miles on it and almost all the other suspension components were also junk. But when the subframe was still fully mounted to the car I could get it to move ~1/4" in most directions with a good shove.
Now the car drives beautifully with all new control arms front & rear, shocks, airbags, subframe bushings, diff bushings, guibo, center support bearing, tires and an alignment.
Here are my old bushings:
Sent from my LGUS992 using Tapatalk
Please add me to the rental list.
Thank you
The tools are shipping back to me tomorrow. They will be ready to go out again by end of the week.
Reservation list:
1. impster
Hey, could you add me to the rental list? Will you PM me for the PayPal details?
Thanks, and can't wait to get those crappy old bushings out!
Tool is shipping out to member impster today.
Updating reservation list:
1. impster - current renter
2. unixfan
Updating reservation list:
1. impster - current renter
2. unixfan
3. DaveLyd
Tool works as advertised and made the job sooooooo easy. Having a 4 post lift also helped. Have to add that I am not happy with the Meyle HD bushings, as they transmit an unacceptable amount of noise at highway speed. Others may not be bothered but my aged ears noticed the increase right away. I suspect that some of the noise I'm hearing is from my rebuilt driveshaft which I've never been completely satisfied with but I'm still surprised by the volume increase inside the cabin after the bushing change. This may also be less of an issue in a sedan than a touring.
Hi M5 Jed, could you add me to the list for the rear differential bushing tool? (Not the sub-frame tool - I've already used it and it worked great!) I'm ready for it as soon as you can get it to me. Please PM me the Pay Pal details again.
Thanks
The subframe bushing tool is with member DaveLyd.
Updating reservation list:
1. impster
2. DaveLyd - current renter
3. member george
The differential bushing tool is currently with member cybervette.
Hi M5 Jed, Can you please add to me to the reservation list for the subframe bushing tool?
The subframe bushing tool is with member DaveLyd.
Updating reservation list:
1. impster
2. DaveLyd - current renter
3. member george
4. Vilocty
5. EyExR
The differential bushing tool is currently with member cybervette.
Last edited by M5 Jed; 10-23-2017 at 07:45 PM.
Please add me to the list, thank you!
2000 528i Touring Sport-Premium (Daily Driver)
2015 X3 (Wife's car)
2016 Chevrolet SS, 6spd manual (Weekend fun)
The subframe bushing tool is en route to member george.
Updating reservation list:
1. impster
2. DaveLyd
3. member george - current renter
4. Vilocty
5. EyExR
6. coolcom
7. carlh19661
The differential bushing tool is currently with member cybervette.
Last edited by M5 Jed; 10-27-2017 at 09:47 AM.
Hey M5Jed, could you please add me to the list? (This time for real)
Thanks!
The subframe bushing tool is en route to member george.
Updating reservation list:
1. impster
2. DaveLyd
3. member george - current renter
4. Vilocty
5. EyExR
6. coolcom
7. carlh19661
8. unixfan
The differential bushing tool is currently with member cybervette.
Bookmarks