You're a lifesaver. Thanks a bunch!!
I just cut 7 more of them. Let me know who wants one. I didn't spend much time sand blasting so their not perfect but it will work for being behind the glove box.
$10 should cover paypal, shipping and mtl. xxxxxx I used #6 socket head caps with nylok nut. I'll see what hardware i have around.
Actually found some hardware around, not going to be the correct length, you'll have to cut it down. Throwing them in the bag.
paypal is the same as <my username on this forum> @gmail.com
IMG_2765 (1).jpg
Last edited by vikrampatel86; 04-19-2017 at 07:19 PM. Reason: changed price
Live, Laugh, Love, \\\M
Vikrampatel86@gmail.com. PayPal
Live, Laugh, Love, \\\M
PayPal sent. Thanks
PayPal sent also. Thanks .
Sent Paypal
Sent from my iPhone using Tapatalk
Sent Paypal Thanks
PayPal sent, thanks for making these up!
Looks like i have 1 left. PM me before sending a paypal. If more people want it i could make a second batch. I'd prefer to get some input from some people first.
Live, Laugh, Love, \\\M
Thanks again for making these up! Can't wait to install ^^
NP. Make sure to let me know how they work out. If I make more, i may try something a little thinner. Used 11 ga on these (0.120"). I want to try out a 12 or 13 ga (.1050 - 0.900 respectively).
This batch i sent out was sand blasted, tried to remove as many burr's as i could but sorry if they're not perfect.
Live, Laugh, Love, \\\M
If it is the same price I would most likely get in on the next batch you cut.
One left. I got Ted and Kevin's going to the post office in the morning.
Live, Laugh, Love, \\\M
Thank you for making these! I'll take your last one. Money sent via PP. I'll send you a PM too.
Making any more? I'd love one. Missed out on the last bunch. Thank you!
Larry
ohlm79@aol.com
Can I get one?
Let me know if I can go ahead and PayPal you $10 please.
Thank you!
Minsoo
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2015 Black Metallic Nissan GT-R Black Edition
2015 Protonic Blue BMW i8 Pure Impulse Edition
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Sorry that I missed out. Please reserve one for me if you make another batch.
Terry
That's great! Glad i could help. I'll try to get another batch.
I should have asked, but did you have to cut down the hardware? I also had to add an additional washer on the front side of the bolt cause my glove was in bad shape.
Hopefully everyone else has the same experience as you.
Also, if any one buys a bunch of those little black caps for the trim screws.... remember who helped out
Live, Laugh, Love, \\\M
I would like one if you make a new batch thanks
Sent from my iPhone using Tapatalk
I'm interested in one too
I could definitely use one too! I will be watching this thread
Got 8 More. Pictures coming tonight.
Going to be $15 per for this batch shipped. 12 ga stainless. Hardware included (bolts will need to be cut down). #6-32 hardware with washers and nylok nut.
Last edited by vikrampatel86; 04-28-2017 at 05:38 PM. Reason: added detail and price.
Live, Laugh, Love, \\\M
Bookmarks