... Finishing my swap

[douglee25]

Interesting. Now I'm sure those trans will be going up in price too!

[livingez123]

Where in Oregon are you located?
Are you still making mounts and headers?

[seansimsneill]

Yes where in Oregon?

[Jesus Freak]

Yes where in Oregon?

Salem

[bowden90]

Hey Josh,

Ive got your motor mounts in my car with a t56 behind it but the transmission mounts dont line up with the factory rubber transmission mounts. Im in australia and using a holden commodore transmission mount.

Its too tall and doesnt fit between your crossmember and the gearbox which is jacked up as high as itll go. I even had to cut a big chunk of metal out to get the rubber boot on the shifter to fit through into the cabin.

Thanks

[Jesus Freak]

Hey Josh,

Ive got your motor mounts in my car with a t56 behind it but the transmission mounts dont line up with the factory rubber transmission mounts. Im in australia and using a holden commodore transmission mount.

Its too tall and doesnt fit between your crossmember and the gearbox which is jacked up as high as itll go. I even had to cut a big chunk of metal out to get the rubber boot on the shifter to fit through into the cabin.

Thanks

I've never installed a t56, but I believe you want a mount like this.
https://www.summitracing.com/parts/s...caAoIPEALw_wcB

[Lantz]

Prothane 7-1604-BL is what worked for me.


Sent from my iPhone using Tapatalk