FS: e36 RMS supercharger Kit stage 2 plus supporting mods UK sale

[DrBm]

Hi All,
I have Interesting Project for someone who wants some fun.

Items

RMS supercharger kit stage 2.5 Refurbished comes with Brand new Vortech BOV New HD bearing Vortech charger, New Flat head Bolts and Allen bolts, Painted and polished
8 rib set up, 14PSI new Price $4100 dollars Please PM for shipping cost. Remember Based in England (United Kingdom)

M3 US cams £500 Comes with matching carriers RARE.
New Stewart high performance water pump £170 With Box New
M3 Exhaust Manifold £200 Wrapped in exhaust wrap
M3 oil cooler kit £160
Alpina527 M50 Manifold boost Ready £220 Pressure tested prefect with if bought with methanol kit
Lighten fly wheel and clutch £200 Solid Racing flywheel.
Methanol water injection kit £160

M52 Engine Low comp with head stud and gasket with oil drain sump £550

Willing to break Engine:
Single Vanos unit £160 Refurbished Teflon seals with no play seal from Dr.Vanos
Top cylinder head smooth surface. £200 Head had surface work done from Power4peanuts


All prices are in Sterling Pounds (£)

E-mail me if any questions

Location: **United Kingdom**

[DrBm]

PM sent ChrisV990

[DrBm]

Reduced* 4100 dollars + Shipping (roughly around $250) can add insurance at cost
14psi setup
8 rib setup
custom auto tensioner setup comes with belt
Requires your ECU to be tuned.

[DrBm]

Reduced* 4100 dollars + 220 shipping. Insurance available on request
14PSI setup
8 rib set up
custom auto tensioner with belt.
Your ECU requires tuning after install I was running a standalone ECU which is now sold.

[DrBm]

Reduced** 4100 dollars + 200 shipping (insurance available on request)
14PSI set up
8 Rib set up
Auto tensioner set up similar to Dinan supercharger kit.

[DrBm]

bump

[DrBm]

Here are some pic of the auto tensioner set up on the RMS Supercharger. Please be aware this was in development stages everything now has been painted and polished.

[DrBm]

RMS supercharger kit stage 2.5 Refurbished comes with Brand new Vortech BOV $4100 + $200 New HD bearing Vortech charger, New Flat head Bolts and Allen bolts, Painted and polished

Supercharger bracket

Pulley and fan spacer

Water to Air Exchange painted wrinkle finish red.

V1 rebulit and tested supercharger NO play in sharft

Brand New BOV included


Comes with supporting bracket kit help keeps the charger solid in place.
These are the picture of main components, there is is the heat exchange rad behind the bumper which is in very good condition. With the manifold I can block off the methanol injector ports and seal it.
Also everything included in the kit now missing components.
Also i will throw in the m50 manifold for $300 so its a complete bolt on kit all work done. Please note the Manifold is not the cheap plumbing type it has the custom made adaptor.