Well, after 6 months I couldn't deal with daily driving the 7 anymore. The gas mileage was killing me, and unfortunately I don't have the means for two vehicles. With that said, I did pull the heckblende off the car, so that I could offer it to an enthusiast rather than sell it with the car. If some of you recall I originally got it from Shogun, and it is a very hard to find part. Definitely gives the car some nice European flair. The only problem with it is that there is one imperfection in the reflective mold, that makes it look like a crack but it is not one. Once on the car, and license plate mounted up you can't notice it anyways. Here are a few pics:
Here you can see the imperfection on the upper left side:
I am looking to get $200 or best offer shipped and insured within the US.
IG: Wobblenuts
If I had any of my old E32's, such a rare find would never have been available...GLWS
[/IMG]
See PM
Is it gone?
Oof if only I had the disposable income to snag this. That's a steal, and I'd love to have it, but no money . Good luck with your sale
Ill take $150 shipped in the US.
I still have this laying around. Someone buy it
Last edited by shogun; 02-06-2014 at 06:12 PM.
IG: Wobblenuts
hey do you have more pics of your car? and was it dropped? it seems lower. what size rims?
well atleast i helped you bump your thread...
Sorry I just saw your reply. It was lowered on custom made coilovers. The wheels were 18s.
IG: Wobblenuts
Where can I see more pics? And some more info about the coilover plz. Did it ride badly?
what size 18`s were those?? they look beautiful to me, my car is also lowered but with BBS RX 203 17`s, 235/45/17
Yes they look good from the pics. Hopefully we can see some more. By the way do you have pics of yours? How did you lower it? I just bought some 18s and want to know how I should go about lowering the car
There you go
it has lowering suspension I think was lowered in Japan before exported to Pakistan
Niceeeee. How exactly was it lowered? I like this. Simple and effective
different lowering suspension kits available on the net, Ebiach etc shorter springs reduce the hieght just replace the springs with shorter ones
well the thing is i cut 2 1/2 coils from the front and got a nice height in the front. the car still rides comfortably. the problem is the springs in the back. i am thinking if cutting 2 1/2 coils in the back will still give me a good, comfortable ride. if so i will do that.
you should have a similar ride quality as with the front suspension most people say it doesnt make much difference,I would suggest you opt for springs havin one or two coils less rather then having the oem ones cut
I cut springs and the ride was terrible. My coilovers were NEX welded with the strut housings cut an inch and welded. The wheels were 18x8.5 and 18x10. Also, my Heckblende is still available.
IG: Wobblenuts
Anyone want this? Its still in my closet.
IG: Wobblenuts
Yeah I'm interested. Let's make a deal. Ship to 98230.
My Current Cars:
E70 2010 X5 4.8i Xdrive Spacegrau
E90 2008 M3 6MT Silverstone II
E34 1992 M5 3.6 J-spec Calypso
E34 1990 535/5 turbo Bronzit
E32 1990 750iL Highline Delphin
E30 1988 325i M54 swapped Schwartz Convertible
No longer with me:
E46 2001 330Ci Titanium Silver
E32 1993 740iL Lazurblau
E34 1992 525iT Kashmirbeige
E34 1990 535/5 Cirrusblau - Former Miller Performance Stage 2 Test Mule Car
E34 1989 525i Cirrusblau - the Slug
E21 1981 320i w/ M20 swap Arktisblau
E21 1979 320i Turmalingrun
Is that Heckblende sold meanwhile? I got an inquiry from Australia for the long version = for EURO license plates = same as shown above. I got another one from my buddy's Alpina B12. Just sent him the pics, but if he does not want to have it, I got 1 available.
Shogun tricks and tips for the E32 series are HERE!
That one is for EURO plates, but most probably goes to Australia, I might get in another one for Japanese license plates, that is approx the same size as US plates, but the holes for the license plate bracket in the rear plate of the trunk are in a different position in US, so you might have to drill new holes into the Heckblende or attach the Heckblende to a license plate bracket.
Japanese version http://produkte.bilder-speicher.de/0...2japanese.html
EURO version http://produkte.bilder-speicher.de/0...geuropean.html
both http://produkte.bilder-speicher.de/0...-japanese.html
Shogun tricks and tips for the E32 series are HERE!
ok let me know
OO=[][]=OO
BMW CCA First Coast Chapter
Vice-President
BMW CCA Foundation Ambassador
"You cannot expect to wield supreme executive power just 'cause some watery tart threw a sword at you?"
Gentlemen, blend sold or is still left? =)
I have another used one on stock. That is the version for U.S. and Japanese size license plates, shorter than for example the German license plates. My Japanese license plate is 33 cm long and 18 cm high. Like the left version http://produkte.bilder-speicher.de/0...-japanese.html
Do not know the size of license plate in your country. US $ 200 shipped by registered air parcel, import duty receiver has to pay, if applicable. Shipping overseas in properly packed carton and that size costs me about $50-60, that is why I have to ask for that price. First come, first get.
Shogun tricks and tips for the E32 series are HERE!
Bookmarks