We have some LED Kits in stock now! These are very bright and do not give any errors on the dash or flickering.
I have a set of this kit on my E46 and it's very bright. Also have installed in hundreds of cars with 100% customer satisfaction
We carry kits for the following BMWs: E30, E36, E46, E60, E61, E63, E64, E82, E85, E89, E90, E92, E93
You can look at all the BMW Kits at the following link:
http://www.switchcarparts.com/catego...show=12&page=2
If you have any questions please PM Me.
Last edited by Press22; 09-24-2013 at 01:50 PM.
instagram @andyitslit
no e36?
Last edited by Press22; 09-26-2013 at 05:08 PM.
instagram @andyitslit
Are these plug and play bulb replacements or do they require rewiring
The E36 Sedan has four additional bulbs that the coupe lacks, two in each c pillar. Is there a kit available with those added? If so I'm in for a kit. The kit you have only serves the coupe.
Also didn't see E36 tag bulb replacements. Those would probably be a separate kit I imagine since they are exterior lights.
Sent from my SCH-I535 using Tapatalk 4
Last edited by EE05063; 09-24-2013 at 07:24 PM.
My M3 is 1 of 2
Are the LEDs reverse polarity?
I made the corrections of the kit as you are right about the "C" Pillar lights.
If you want license plate lights they are the same as the E46.
Link: http://www.switchcarparts.com/BMW-E4...scp007-39x.htm
These bulbs are plug and play and not reverse polarity.
instagram @andyitslit
My M3 is 1 of 2
Another link for e36? The link above isn't working. Thanks
http://www.switchcarparts.com/12-Pie...-p/scpbmw7.htm
Sent from my SCH-I535 using Tapatalk 4
My M3 is 1 of 2
Bump to the top
instagram @andyitslit
Bump
instagram @andyitslit
On the E36 coupe, there are two map/reading lights up front and a center dome light up there, too. does this kit replace all three of those in the front overhead console?
thanks!!
To the top.
instagram @andyitslit
bumpity
instagram @andyitslit
Bump
instagram @andyitslit
How about for E38?
Order placed for E36 bulbs
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
We do have a E38 Kit.
http://www.switchcarparts.com/Produc...tCode=SCPBMW10
instagram @andyitslit
Order placed for E36 M3 interior and E46 license plate lights. Thanks!
Got my order in Sent you a PM. thanks.
Last edited by EE05063; 10-19-2013 at 10:03 PM.
My M3 is 1 of 2
Do you offer LED replacement bulbs for the taillight /brake light/ third brake light/ turn signal and reverse lights and front turn signals/side markers on the E36 that are error free?
In other words an exterior lighting kit for the E36, sans headlight bulbs of course.
I would like to see LED headlight replacements too, is the technology still not mature enough for those?
I will post pics of the interior bulbs once I get the headliner and pillars reinstalled.
Sent from my SCH-I535 using Tapatalk
Last edited by EE05063; 10-23-2013 at 09:26 PM.
My M3 is 1 of 2
Maybe a for sale thread this isn't the place for a review, in which case I apologize. I will preface this by saying that I did NOT take this up with the vendor because I didn't feel it was worth my time (read on). Judging by the responses other people have received (extra bulbs being added to kits as required, etc.) I'm sure the vendor would have corrected at least one of my issues if I'd contacted them.
My kit was short 2 bulbs for an M3 sedan. I had spares from another project so I just used my own bulbs. Also, the license plate LEDs generate an error randomly about 25% of the time, sometimes when I turn the lights on and sometimes after driving for a while. I've since replaced those LEDs with a much more expensive unit that is both light housing and LEDs as one unit because errors drive me nuts.
Otherwise the bulbs are great, install is easy (the C pillar bulbs are a crazy snug fit... don't break anything trying to get them in!) and they are really bright. If you want LEDs you cannot beat the price. Here's what I got, tell me if I'm wrong and I'll update this:
Last edited by IAmGary; 10-24-2013 at 04:28 PM.
Bookmarks