Page 3 of 10 FirstFirst 12345678910 LastLast
Results 51 to 75 of 230

Thread: Post Pics of Your Hard Motorsport 330 E36 Coupe Rivet on Fender Flares

  1. #51
    busterhax's Avatar
    busterhax is offline Y̝͎̘̍́ͣ̉͑̿̆Ō͎̼̺̬̒ͯ̃̇͗̂ U͈̖
    Join Date
    Jun 2006
    Location
    NYC
    Posts
    8,440
    My Cars
    e36
    Where my photoshop experts at? I'm painting my flares arctic silver to match my car but I can't decide if I will use the black rivets, paint the rivets arctic, or get stainless rivets...

    Ideas?

  2. #52
    Join Date
    Jan 2010
    Location
    tampa, fl
    Posts
    452
    My Cars
    E46 M3, E36 M3
    Quote Originally Posted by busterhax View Post
    Where my photoshop experts at? I'm painting my flares arctic silver to match my car but I can't decide if I will use the black rivets, paint the rivets arctic, or get stainless rivets...

    Ideas?
    see my thread, mine were painted matched. Black rivets might have looked better
    http://forums.bimmerforums.com/forum...on-turbo-build

    but a paint marker can take care of that

  3. #53
    busterhax's Avatar
    busterhax is offline Y̝͎̘̍́ͣ̉͑̿̆Ō͎̼̺̬̒ͯ̃̇͗̂ U͈̖
    Join Date
    Jun 2006
    Location
    NYC
    Posts
    8,440
    My Cars
    e36
    Quote Originally Posted by aablown View Post
    see my thread, mine were painted matched. Black rivets might have looked better http://forums.bimmerforums.com/forum...on-turbo-build but a paint marker can take care of that
    Wow perfect timing! Stoked for more pics. I think I'll keep them black.

  4. #54
    Join Date
    Mar 2007
    Location
    DALLAS, TX
    Posts
    2,994
    My Cars
    e24, e30, e36, e61, e70.
    Quote Originally Posted by chynk View Post
    What kind of lip spoiler is that?
    looks like a rocket bunny off of an s14, hopefully the owner could chime in.


    ​IG: @Street.Ego

  5. #55
    Join Date
    Oct 2007
    Location
    jacksonville, fl
    Posts
    2,229
    My Cars
    e36 m3 Ls2, 318I, 325is
    Quote Originally Posted by Montreal e36 View Post
    looks like a rocket bunny off of an s14, hopefully the owner could chime in.
    The wing is a custom piece I build, will be available soon.. follow me on instagram for updates @o_mateo..

    Now back to the topic..

  6. #56
    busterhax's Avatar
    busterhax is offline Y̝͎̘̍́ͣ̉͑̿̆Ō͎̼̺̬̒ͯ̃̇͗̂ U͈̖
    Join Date
    Jun 2006
    Location
    NYC
    Posts
    8,440
    My Cars
    e36
    Did you all cut out the recess for the moldings? I just got mine in the mail and the recess doesn't seem to be as tight as everyone elses.

    (rear on left, front on right)





  7. #57
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    We do not cut the moulding recess to reduce the risk of being damaged during shipping.

    Feel free to email me at adam@hardmotorsport.com
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  8. #58
    busterhax's Avatar
    busterhax is offline Y̝͎̘̍́ͣ̉͑̿̆Ō͎̼̺̬̒ͯ̃̇͗̂ U͈̖
    Join Date
    Jun 2006
    Location
    NYC
    Posts
    8,440
    My Cars
    e36
    Quote Originally Posted by ahardm3 View Post
    We do not cut the moulding recess to reduce the risk of being damaged during shipping. Feel free to email me at adam@hardmotorsport.com
    Thanks for the heads up. I literally just came across the pics from your build when you were painting and saw. I'll email you for some pointers. Can't wait to get these on.

  9. #59
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    Here are some pics our customer Rob's M3 (Which is for sale currently)





    I love how he textured the flares to make them match the moldings




    Last edited by ahardm3; 11-13-2013 at 05:37 PM.
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  10. #60
    Join Date
    Jun 2007
    Location
    H-Town/Los Angeles USA
    Posts
    1,911
    My Cars
    bmw e36 328i 4dr saloon
    Turnt up!
    1996 328i (m52B28US) OBD1 euro ZF 5spd. 3.23LSD conversion / Chem. PnP Head/ DINAN stg.2 CHIP/ VAC race valves/ S52 cams/ A/C delete/ fan delete/ Washer Fluid resv delete/ ARP head studs/ Cometic 140MLS / VAC Solid Engine/trans Mounts/ CAI / 2.5"Borla race exahaust/ NGK R spark plugs, M50 Mani, S50 Oil Res, Riot Racing HFTB, SAMCO Hoses, JBR FW, X-Brace, Mtech Front Bumper, RE RSMs, stoptech SS lines, Bilstein sports, H&R Race Springs, S52 Reinforcement plates, Kosei K1 w/ bridgestone RE960as, Brembo/stoptech slotted rotors, M3 Trailing arms, M3 Calipers, M3 Axles, ACS strut brace, weight reduction.

    http://mbuild.blogspot.com/

  11. #61
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    image-4231769604.jpg

    Orr Autosport's GTS3 M3
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  12. #62
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    Last edited by ahardm3; 12-24-2013 at 01:08 PM.
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  13. #63
    busterhax's Avatar
    busterhax is offline Y̝͎̘̍́ͣ̉͑̿̆Ō͎̼̺̬̒ͯ̃̇͗̂ U͈̖
    Join Date
    Jun 2006
    Location
    NYC
    Posts
    8,440
    My Cars
    e36
    Quote Originally Posted by ahardm3 View Post
    <img src="http://forums.bimmerforums.com/forum/attachment.php?attachmentid=487678"/> <img src="http://forums.bimmerforums.com/forum/attachment.php?attachmentid=487679"/>
    Beautimous. You running spacers here? Spring can't come soon enough.

  14. #64
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    Quote Originally Posted by busterhax View Post
    Beautimous. You running spacers here? Spring can't come soon enough.
    15mm up front to clear the MCS Coilovers
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  15. #65
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    Danny's

    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  16. #66
    Join Date
    Apr 2004
    Location
    SOCAL
    Posts
    6,229
    My Cars
    IG: Clearsandadrop
    Quote Originally Posted by ahardm3 View Post
    Danny's
    Any info on the running gear specs? Offset, width, tire size?

    I have a set of your flares for the rear of my sedan, yet to be installed. I'm planning of running these on the rear:



    18x11 265/35/18 et 30ish, wondering who has found the size limit of your flares?
    Last edited by m3mobbin; 12-29-2013 at 08:30 PM.

  17. #67
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    "Some details of the car: e36 325i coupe, ta technix suspension, novus group n exhaust, act rims with 9,5x16 et14 +20mm spacer on the front, and 25mm spacers on the back. Tite size 215/40."
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  18. #68
    Join Date
    Mar 2003
    Location
    Winnipeg, Manitoba
    Posts
    2,911
    My Cars
    1997 BMW M3
    extremely practical but ugly.
    97 BMW M3 (s52b32) - VF-Supercharger kit ( Vortech V2-SQ supercharger, 32 pound injectors, VF tuning ), VDO/LeatherZ Gauge Kit (Oil Temp, Oil Pressure, and Boost), UUC Motorwerks RSC36 Exhaust, Stainless Steel 6-2 Exhaust Headers, Bilstein Sports, Rear Adjustable Camber bushings, Wheel Spacers 10mm in front 25mm in back, Uprated Clutch, UUC Shift Knob, Short Shifter and Clutch Stop, Cross Brace, Mason Engineering front strut bar, Contour Wheels, Euro Ellipsoid (Angel Eyes) HID Headlights, braided steel brake lines, aluminum thermostat housing, mishimoto aluminum radiator and silicone hoses and a partridge in a pear tree

  19. #69
    Join Date
    Jul 2007
    Location
    Northeast NJ
    Posts
    2,931
    My Cars
    X5/5MT || Z4MC
    Quote Originally Posted by Compactive View Post
    Would love to see some of these on a compact

    good stuff everyone
    I'd love to get these on mine, but I guess they don't make compact/sedan fitment. Need some more meat out back!
    Past Builds:
    S54 E36 Compact Build|Thread|IG|@_goldfinger|


    Current Fleet:
    Z4 M Coupe - Black Sapphire Metallic over Black

  20. #70
    Join Date
    Jun 2007
    Location
    H-Town/Los Angeles USA
    Posts
    1,911
    My Cars
    bmw e36 328i 4dr saloon
    I would like to see a set of these made for a sedan
    1996 328i (m52B28US) OBD1 euro ZF 5spd. 3.23LSD conversion / Chem. PnP Head/ DINAN stg.2 CHIP/ VAC race valves/ S52 cams/ A/C delete/ fan delete/ Washer Fluid resv delete/ ARP head studs/ Cometic 140MLS / VAC Solid Engine/trans Mounts/ CAI / 2.5"Borla race exahaust/ NGK R spark plugs, M50 Mani, S50 Oil Res, Riot Racing HFTB, SAMCO Hoses, JBR FW, X-Brace, Mtech Front Bumper, RE RSMs, stoptech SS lines, Bilstein sports, H&R Race Springs, S52 Reinforcement plates, Kosei K1 w/ bridgestone RE960as, Brembo/stoptech slotted rotors, M3 Trailing arms, M3 Calipers, M3 Axles, ACS strut brace, weight reduction.

    http://mbuild.blogspot.com/

  21. #71
    Join Date
    Apr 2004
    Location
    SOCAL
    Posts
    6,229
    My Cars
    IG: Clearsandadrop
    Quote Originally Posted by Ragnorak View Post
    I'd love to get these on mine, but I guess they don't make compact/sedan fitment. Need some more meat out back!
    Quote Originally Posted by stealthbeam View Post
    I would like to see a set of these made for a sedan
    After a bit of work with a heat gun, bumper repair epoxy, sandpaper, and some files I easily modified the rear flares to fit a sedan. No more recessed area for the side molding.



    Trying to get this to work (18x11 et33mm 265/35/18, may need to use a spacer for inner clearance):

    Last edited by m3mobbin; 12-31-2013 at 03:31 PM.

  22. #72
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    another shot of Robs M3. picture taken byTonkpilsNeon
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  23. #73
    Join Date
    Apr 2008
    Location
    Spokane, Wa
    Posts
    1,718
    My Cars
    '97 M3/2/6 '01 996tt
    We have discussed doing a 1 time only run of sedan/ti flares if we have enough interest. Anyone interested?
    http://www.hardmotorsport.com http://Facebook.com/HardMotorsport

  24. #74
    Join Date
    Jan 2010
    Location
    tampa, fl
    Posts
    452
    My Cars
    E46 M3, E36 M3


    yummy fender flares practically brand new stock fitment Brembo rotors coming off for some ST40 Stoptechs!

  25. #75
    ayo's Avatar
    ayo is offline What is this I don't even
    Join Date
    Dec 2008
    Location
    Houston
    Posts
    532
    My Cars
    Stocky McStockstock E36
    Quote Originally Posted by ahardm3 View Post
    We have discussed doing a 1 time only run of sedan/ti flares if we have enough interest. Anyone interested?
    Depends on how much they'd be, but possibly interested.



Page 3 of 10 FirstFirst 12345678910 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •