Page 10 of 10 FirstFirst 12345678910
Results 226 to 230 of 230

Thread: Post Pics of Your Hard Motorsport 330 E36 Coupe Rivet on Fender Flares

  1. #226
    busterhax's Avatar
    busterhax is offline Y̝͎̘̍́ͣ̉͑̿̆Ō͎̼̺̬̒ͯ̃̇͗̂ U͈̖
    Join Date
    Jun 2006
    Location
    NYC
    Posts
    8,440
    My Cars
    e36
    Quote Originally Posted by ewrjontan View Post
    I have a question about installing the rears and have attached a picture. Obviously, you cut out the section in the red box and the rear bumper can be pulled-out/shimmed to make room for wider tires/wheels. However, what about the part in the green box? To me, it seems like the wheel/tire would hit it if you DON'T cut that part out but it seems like a lot of people don't cut that area? Does the nature of the suspension travel more or less allow the area to not come into contact with the wheels?

    http://imgur.com/a/L2Aaq
    All depends. I didn't need to.


    Sent from my iPhone using Tapatalk

  2. #227
    Join Date
    Apr 2003
    Location
    Charlotte, NC
    Posts
    670
    My Cars
    AW E92 M3 Competition
    Sorry to revive an old thread. I just wanted to see if anyone had more shorts of the trimming and welding involved. The original links no longer have images.

    I am planning to conduct surgery on a sedan if it matter.

    Thanks.
    Alex

    [SIZE=1]BMWCCA# 368302

  3. #228
    Join Date
    Jan 2004
    Location
    NY
    Posts
    22,823
    My Cars
    skateboard
    Quote Originally Posted by purplem3pursuit View Post
    Sorry to revive an old thread. I just wanted to see if anyone had more shorts of the trimming and welding involved. The original links no longer have images.

    I am planning to conduct surgery on a sedan if it matter.

    Thanks.

    Good thing you bumped this. I was about to do the same

  4. #229
    Join Date
    Jan 2010
    Location
    tampa, fl
    Posts
    452
    My Cars
    E46 M3, E36 M3
    Quote Originally Posted by GG///M3 View Post
    Good thing you bumped this. I was about to do the same
    check out page two of my build thread https://www.bimmerforums.com/forum/s...hlight=Aablown

    after you cut the fenders you will notice there are layers, these need to be sanded, and then sealed.

  5. #230
    Join Date
    Jan 2004
    Location
    NY
    Posts
    22,823
    My Cars
    skateboard
    Quote Originally Posted by aablown View Post
    check out page two of my build thread https://www.bimmerforums.com/forum/s...hlight=Aablown

    after you cut the fenders you will notice there are layers, these need to be sanded, and then sealed.
    Not on the fronts right?
    “If liberty means anything at all, it means the right to tell people what they do not want to hear.”
    ― George Orwell

Page 10 of 10 FirstFirst 12345678910

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •