- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
different! I like!
Got the final alignment done today.
Front end:
xxx Caster (removed pending confirmation)
3.5* Camber
1/32" Toe
Rear:
2.3* Camber (max we could take out)
1/16" Toe
Mileage for tire wear tracking: 97647 after alignment
Wheel/tire specs added to OP.
Last edited by robb1887; 04-28-2015 at 05:27 PM. Reason: Caster stuff
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Actually now that I think about it that was the delta between the two I just remember that number since we talked about it. I don't recall seeing the actual angle but it was unchanged from my last alignment I'll dig up the sheet when I get home since I think he forgot to throw the new one in the car today.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Stock Z3 is around 3.5. M is over 7. Mixing the two, M caster on Z3 knuckles or visa versa, causes horrendous bump steer.
/.randy
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Is that the German version of the CD changer cover?
/.randy
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
I'm indifferent about the euro glovebox. What's actually impressive to me about both those parts is that the 'inner' mounting tabs (that hold the speed nuts behind the center console wings) are actually intact.
DIY/Project Links:_TC Kline D/A & Suspension Refresh_|_Oil/Engine Cooling Options / Install_|_
Dinan/Fikse FM-5 Build_|_Stereo Install_|_HID Retrofit_|_
I know! I saw the setup in Mark's car and decided to keep an eye out for them. For roughly 100 shipped to me I can't complain after looking one night and both in beige.
Last edited by robb1887; 05-06-2015 at 10:47 PM.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
So wheel weights are in! I took the time today while I was touching up the lips from Schuh's mayhem and fitting a little more clearances in the fenders to weigh them.
(On my highly calibrated bathroom scale)
Front: ~55lbs
Rear: ~60.5lbs
Taking into consideration the tire weights I had from before:
295/30/18 Yokohama AD08R -31lbs
255/35/18 Yokohama AD08R -28lbs
Front wheels: 27lbs
Rear wheels: 29.5lbs
Have some photos to upload this weekend of the finalized S50 euro tank swap but they are still on the card in the camera.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Worth every cent. I'm anxious to drive it again now since I just made some more clearance adjustments. Need to see if they are still rubbing as bad as they were before
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
I'm not really that worried about the weights more for informational purposes. I wouldn't be surprised if the scale was off 2-3% itself.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
My measurements on my 255/315s: total of balancing weights on all four tires=12oz. Throw in 4 rubber valve stems and we're still under a pound. I've weighed wheel&tire combos un-inflated and over inflated and could not measure any real world difference.
- 1of1 rebuild (build thread) -
- Wanted Car items - FS: PnP aftermarket alarm details -
- Coupe Custom Subwoofer box - FS: Z3 Coupe LED 3rd brake lights -My Website for DIY content and parts: Double Bee Garage
Did I just read someone saying 2lbs for valve stem. Air and balance weights?
M driver, RSV4 Rider, Powerstroke roller
Bookmarks